It will work just fine for the OP's purposes. Being TSS is heavier than lead one will either have to hand weigh the shot charge or pick up an adjustable bar though I am not a fan of them. Another option would be to try the different sizes of shot bars to see if one of them will throw the shot weight you want. If necessary, one can easily bore out a smaller bar or reduce the volume of a larger bar with tape or other item to get the desired drop weight. I've done all the above when using lead bars for bismuth, steel, and various tungsten alloys.
Thanks for that! For no more than I would likely load, I was planning on weighing out each.
