But, but, but, the candle method is the Sacred Cow on this forum. Lol.

You'll get tired of messing with the tempilac in the drill and socket too. Ya gotta put it inside every case neck, you gotta wait for it to dry, and you probably should brush out the residue afterwards.

Just build one of these, cheap, and easy.



Much better uniformity and much easier to set up and use.

As far as the tempilac is concerned you don't really need it with something like that in the youtube. An orange flame starting off of the case neck is the zinc in the brass starting to burn off (easier seen in a darkened room). That's too hot. Back off your time in the flame by increasing the rotation speed and getting the case to drop a second or two before the orange flame first starts. That'll be around 740 or 750 degrees and it will be a good consistent anneal from case to case.

I prefer peace. But if trouble must come, let it come in my time, so that my children may live in peace. ~~ Thomas Paine