Home Forums Gear Hunting Trucks and Four-Wheel Drives Huntin' Trucks

Boots,

- I use a 50/50 mix of Total Power FPPF and 8+

- I have installed a Mega fuel filter kit

- I have an Amsoil air filter in a modified airbox

- I have the Edge Juice w/Attitude module

- I am using a GM 6.5 Lift Pump

- I had Bilstein shocks until I lifted the truck

All the above is available at: www.kennedydiesel.com

- I have a Rancho 4" lift with Rancho RS 9000 shocks

- I have Real Lift torsion bar relocaters

- I have 16x8" wheels with 3.375" backspacing and General Ameritrack ATs in 285/75R16. I'll probably go to BFG 295s later.

I still need to flip the strut rods on the lift kit, install a oil pressure switch and manual switch on the lift pump, install the OD lockout, install rear wheel spacers and fender flares. I may go all out and get the "cut out" style fender flares and put on 315s--which would make me want to change to 4.10 gears before I tow anything.

Blaine