First time loading the 300 Win Mag. Ordered some 180gr Accubonds, and realized I should have ordered some RL22 as well from reading different posts.

I have H1000 and H4350 on hand in bulk and would like to use one of the two. Just don't want to introduce another powder to the bench if it is not needed. I have other powders, but they are all 1 lb cans that I have used for test loads, etc.

Running a Rem 700P with 26" tube, factory rig.

I am thinking 3,000fps is where I would like to be.

Taking this rig elk hunting and tried to run some factory stuff through it, just inconsistent results. Not a lot of time before I go, but have a couple solid weekends to get loaded up. Will Chrony loads while testing.

Thanks for the advise fellas and good hunting to you this fall.


-New Win Cases, worked over. (ran them through the sizer, trimmed, and chamfered.)
-Fed 215M Primers (plenty of them on hand)

Last edited by Gunner75; 09/17/09.
Fast is Fine but Accuracy is Final.