I have used my 6mm rem die on 243 and my 223 for my 22-250. As long as you are using the same caliber (224 that uses 224 bullets) you should be able to use the same neck sizing die.<P>The only reason it may not work is because for example if you use a 223 neck sizing die on a 22 hornet, the thickness of the brass for that particular cartridge may not work properly for resizing the neck, it may not shrink it enough on the down stroke.<P>The decapping pin/expander ball should work for all similar caliber bullets. That is to say an expander ball for a 22 hornet will expand the neck the same diameter as a 22-250 expander ball.<P>I am sure there are holes in my theory but that is what I think until I learn other wise.

Whatever you are willing to put up with, is exactly what you will have.

When your ship comes in. ... make sure you are willing to unload it.

PAYPAL, sucks and I will never use them again. I recommend you do the same.