With regards to Hoyt's bearings and limb pockets being better than other brands parts, I have found them to be of good quality and have had very few problems with them as a bowtech for the past four years.
Other than owner abuse, I have not seen any failures. By this I mean dry fires, for the most part....but I have found that bearings can and will also fail over time from people who draw and shoot with poor form, as the bearings are subjected to torque forces that they are not designed for. You will also want to keep an eye on your top cam for cam lean. It is nice to see that Hoyt is now serving there yoke on the cable, so that cam lean can now be corrected.
But I have to also say that I have found the same results with Mathews, Bowtech, PSE, Bear, Quest, and Athens.
Customer service from Hoyt has been good.
