Rimfire central will set ya right up...personally I don't like to fiddle with shims, sleeves & changing springs trying to get the creep out & pull weight down...a Rifle Basics trigger will cure any of them problems...Yo-Dave trigger is Red Neck engineering at its finest...
Well - it
is the very
finest of redneck engineering though.
It really does work - but you have to confirm that you haven't gone too far by seeing if your rifle passes the "bump" test.
Speaking of redneck engineering...
Yodave doesn't appear to do anything for trigger overtravel (my kit predates Yodave). In case his instructions don't cover it - and they might - you can eliminate overtavel without disabling the removal of the bolt by cutting a piece of rubber tubing to fit over the trigger return spring. Slit the tubing lengthwise and cut it a little long. It takes a little trial and error to get the right length, but at that point, you can still get the full travel to release the bolt by applying enough pressure to compress the tubing.
With a combination of the Yodave kit and the tubing trick, you get a mighty fine trigger.
