Yep, bought it from Wareagle. IIRC he never shot it.
I'm going to check the scope mounts and seat the bullets a little deeper. I'll also remove her from the stock and reattach, paying attention to keeping the barrel centered in the channel.
I'm getting conflicting advice regarding the bedding screws. Some say tighten the rear screw first, some say the front screw first. What this tells me is there is no hard and fast rule.
I'll report back how she does. The next step (if necessary) will be removing the pressure points in the stock.
Thanks all for the help. This is kinda like watching "House."
P
