It has pros and cons; overall I'm pretty happy with it, especially considering the price, but some of the issues might be a deal breaker for other people.
The upper/lower fit is looser than I hoped for, the bolt catch hole is too small for the roll pin, and the chamber was a bit tight. PSA probably would have fixed the chamber, but as a gunsmith, I just did it myself.
It shoots well though; initial load workup this weekend delivered several groups under 1/2" with 150gr and 168gr BT's, and reliability has been 100%.
All said and done, I've got a sub-moa 308 AR that's reasonably light weight (10.2 lb with a 3x9 Leupold installed), produces about 150 fps higher velocity than my PTR-91, and cost just under $1000 before the scope.
