|
Joined: Jul 2014
Posts: 16
New Member
|
OP
New Member
Joined: Jul 2014
Posts: 16 |
who makes the best universal deprime die?
|
|
|
|
Joined: Jun 2004
Posts: 44,949 Likes: 25
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2004
Posts: 44,949 Likes: 25 |
I don't know about best, but I've used the same Lee thousands and thousands of times with no trouble.
|
|
|
|
Joined: May 2002
Posts: 9,548 Likes: 2
Campfire Outfitter
|
Campfire Outfitter
Joined: May 2002
Posts: 9,548 Likes: 2 |
|
|
|
|
Joined: Dec 2004
Posts: 14,488
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2004
Posts: 14,488 |
I've used a Lee Universal since before I can recall. It works and I just don't know how much better it could be, unless it would trim and chamfer my cases for me.
Don't be the darkness.
America will perish while those who should be standing guard are satisfying their lusts.
|
|
|
|
Joined: Sep 2004
Posts: 7,437
Campfire Tracker
|
Campfire Tracker
Joined: Sep 2004
Posts: 7,437 |
Yup, get the Lee decapping die.
μολὼν λαβέ
|
|
|
|
Joined: Jan 2007
Posts: 11,650 Likes: 10
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2007
Posts: 11,650 Likes: 10 |
Lee works good till you get too fat if a I remember right the 30-378 was too fat to run in Lee decapper
|
|
|
|
Joined: Sep 2004
Posts: 8,260 Likes: 5
Campfire Outfitter
|
Campfire Outfitter
Joined: Sep 2004
Posts: 8,260 Likes: 5 |
I run a Lyman universal decapping die. Had it for prolly 20 years. No issues. Best? I don't know. You really don't need anything fancy to pop a primer out.
|
|
|
|
Joined: Jan 2008
Posts: 4,219
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2008
Posts: 4,219 |
^ +1
My RCBS one is probably that old.
|
|
|
|
Joined: Oct 2014
Posts: 563
Campfire Regular
|
Campfire Regular
Joined: Oct 2014
Posts: 563 |
I'm thinking about the Redding, but I also shoot 17's too. It's gotten good reviews.
|
|
|
|
Joined: Dec 2002
Posts: 12,381 Likes: 9
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2002
Posts: 12,381 Likes: 9 |
Help me out here. I've been reloading for over 15 years, but still find myself ignorant of a lot of things. I've never run into a situation where I needed to de-prime without sizing. What have I missed?
|
|
|
|
Joined: May 2002
Posts: 9,548 Likes: 2
Campfire Outfitter
|
Campfire Outfitter
Joined: May 2002
Posts: 9,548 Likes: 2 |
I prefer to deprime before tumbling with SS pins, and the die holds up better with crimped in primers.
I don't like to run dirty brass into my sizing die, and the SS pins do a fine job of cleaning inside of the cases and the primer pockets.
Therefore....
|
|
|
|
Joined: Aug 2015
Posts: 102
Campfire Member
|
Campfire Member
Joined: Aug 2015
Posts: 102 |
Help me out here. I've been reloading for over 15 years, but still find myself ignorant of a lot of things. I've never run into a situation where I needed to de-prime without sizing. What have I missed? I just deprimed 500 once fired Lake City 5.56 cases before wet tumbling. So having a universal depriming die comes in handy before cleaning cases. Especially if you have firearms that throw perfectly good brass away and make you go looking for it. Meaning clean brass after wet tumbling will not scratch your dies.
|
|
|
|
Joined: Aug 2011
Posts: 6,519
Campfire Tracker
|
Campfire Tracker
Joined: Aug 2011
Posts: 6,519 |
I de-prime with a Universal, then re-size with the stem removed. Then put the stem back in and expand the necks with a short down stroke. I know there are better ways (bushing dies) but this works for me and gives me more concentric cases with less neck stretching.
If we live long enough, we all have regrets. But the ones that nag at us the most are the ones in which we know we had a choice.
Doug
|
|
|
|
Joined: Dec 2002
Posts: 12,381 Likes: 9
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2002
Posts: 12,381 Likes: 9 |
OK. That makes sense now. Thanks.
|
|
|
|
Joined: Aug 2015
Posts: 102
Campfire Member
|
Campfire Member
Joined: Aug 2015
Posts: 102 |
I de-prime with a Universal, then re-size with the stem removed. Then put the stem back in and expand the necks with a short down stroke. I know there are better ways (bushing dies) but this works for me and gives me more concentric cases with less neck stretching. lastround You could also use the Sinclair expander die or a Lyman type "M" die to expand the necks. The type "M" die has a "step" that aids in bullet seating and less runout. But if the necks are lubed properly you will get very little neck stretching with normal sizing. I'm using home made lube of rubbing alcohol and lanolin and apply a little to the inside of the neck. Below is a RCBS expander and a light polishing and lube works wonders. You can also buy carbide expander for Redding dies that are very slick. If you remember the Star Wars Ewoks rough habits and lube your case necks they will not scream in pain.
Last edited by bigedp51; 09/08/15.
|
|
|
|
521 members (219DW, 219 Wasp, 1OntarioJim, 1lessdog, 160user, 1936M71, 51 invisible),
10,721
guests, and
1,196
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,195,347
Posts18,546,589
Members74,060
|
Most Online21,066 May 26th, 2024
|
|
|
|