|
Joined: Aug 2015
Posts: 583
Campfire Regular
|
OP
Campfire Regular
Joined: Aug 2015
Posts: 583 |
Working myself up to a 20ga Autoloader for sporting clays. Would like gun built on 20ga sized frame; one that will reliably shoot 7/8oz target loads; 28" VR CT barrel and can be expected to shoot 200 targets between cleaning and be reasonably easy to clean. Suggestions appreciated.
|
|
|
|
Joined: Aug 2002
Posts: 4,167
Campfire Tracker
|
Campfire Tracker
Joined: Aug 2002
Posts: 4,167 |
I picked up a new Turkish gun in 20 ga. One of those sold under several different names. CZ 720, S&W 1020, I think even Mossberg sells a version. Very light gun, maybe 6 lbs. Vent rib, tubes, 28" barrel, shoots target loads just fine, and as long as you use a synthetic CLP in the gas system, 200 rounds is no problem.
Granted, this is really more of an upland gun rather than a clays gun, being so light. But it shoots pretty softly.
It takes a village to raise an idiot.
|
|
|
|
Joined: Sep 2013
Posts: 5,866
Campfire Tracker
|
Campfire Tracker
Joined: Sep 2013
Posts: 5,866 |
Eating fried chicken and watermelon since 1972.
You tell me how I ought to be, yet you don't even know your own sexuality,, the philosopher,,, you know so much about nothing at all. Chuck Schuldiner
|
|
|
|
Joined: Jun 2012
Posts: 17,101
Campfire Ranger
|
Campfire Ranger
Joined: Jun 2012
Posts: 17,101 |
I love the Enel Montefeltro, but I'm damned impressed by this little Silver eagle I got, it's a Turkish gun, but has well over 200 rounds through it with no issues
The government plans these shootings by targeting kids from kindergarten that the government thinks they can control with drugs until the appropriate time--DerbyDude
Whatever. Tell the oompa loompa's hey for me. [/quote]. LtPPowell
|
|
|
|
Joined: Sep 2005
Posts: 6,312 Likes: 1
Campfire Tracker
|
Campfire Tracker
Joined: Sep 2005
Posts: 6,312 Likes: 1 |
Benelli M1/2 or similar.
I picked up a Stoeger M3020 for the kids off of the board here. It is a cheap knock off of the same. It is very light and reliable. 1/2 the price but no claims to longevity.
Last edited by supercrewd; 11/27/15.
NRA Life Member
|
|
|
|
Joined: Jan 2007
Posts: 8,761
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2007
Posts: 8,761 |
Working myself up to a 20ga Autoloader for sporting clays. Would like gun built on 20ga sized frame; one that will reliably shoot 7/8oz target loads; 28" VR CT barrel and can be expected to shoot 200 targets between cleaning and be reasonably easy to clean. Suggestions appreciated. Nothing wrong with the Remington 1100 20 gauge Sporting Clays if your on a budget. Personally I think you should consider a Browning 725 20 gauge sporting with 32 inch barrels...You can thank me later. Buy what you going to end up with..a O/U for clays. Also do you reload shot shells yet? Doc
Last edited by doctor_Encore; 11/27/15.
|
|
|
|
Joined: Oct 2006
Posts: 10,091
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2006
Posts: 10,091 |
It�s a magazine not a clip......
Advice is seldom welcome, and those who need it the most, like it the least.� - Lord Chesterfield. 1750
|
|
|
|
Joined: Feb 2001
Posts: 2,243
Campfire Regular
|
Campfire Regular
Joined: Feb 2001
Posts: 2,243 |
Working myself up to a 20ga Autoloader for sporting clays. Would like gun built on 20ga sized frame; one that will reliably shoot 7/8oz target loads; 28" VR CT barrel and can be expected to shoot 200 targets between cleaning and be reasonably easy to clean. Suggestions appreciated. Easy to clean, sounds like your looking for an inertia operated gun. Benelli Legacy, Montefeltro or M2
|
|
|
|
Joined: Aug 2015
Posts: 583
Campfire Regular
|
OP
Campfire Regular
Joined: Aug 2015
Posts: 583 |
Thanks for the input. Been shotguning for a lot of years. Competitively first with M12 then 1100, to 3200, 303 and then to Kguns. Then to a lot of wonderful years with bird dogs and bird guns with a lot of SxS shoots along the way. Load for all gauges. Have lost track of Autoloader devopment. Still enjoy an old 303 12ga for winter clays. Not too impressed with looks of new 400's. Dawson wants 995 for a 391. Seems like a lot for used gun and I recall dumping one pretty quick because they were nasty to clean.
|
|
|
|
Joined: Aug 2007
Posts: 115,424 Likes: 13
Campfire Sage
|
Campfire Sage
Joined: Aug 2007
Posts: 115,424 Likes: 13 |
Working myself up to a 20ga Autoloader for sporting clays. Would like gun built on 20ga sized frame; one that will reliably shoot 7/8oz target loads; 28" VR CT barrel and can be expected to shoot 200 targets between cleaning and be reasonably easy to clean. Suggestions appreciated. I am not a big shotgun guy, and I only aim and shoot it at live targets, but IMO the Benelli M2 is unbeatable. Travis
Trump being classless,tasteless and clueless as usual. Sorry, trump is a no tax payin pile of shiit. My young wife decided to play the field and had moved several dudes into my house
|
|
|
|
Joined: Aug 2007
Posts: 115,424 Likes: 13
Campfire Sage
|
Campfire Sage
Joined: Aug 2007
Posts: 115,424 Likes: 13 |
Easy to clean, sounds like your looking for an inertia operated gun. Benelli Legacy, Montefeltro or M2
Can one of you shotgun nerds tell me the difference between these 3? Travis
Trump being classless,tasteless and clueless as usual. Sorry, trump is a no tax payin pile of shiit. My young wife decided to play the field and had moved several dudes into my house
|
|
|
|
Joined: Dec 2006
Posts: 2,135
Campfire Regular
|
Campfire Regular
Joined: Dec 2006
Posts: 2,135 |
Easy to clean, sounds like your looking for an inertia operated gun. Benelli Legacy, Montefeltro or M2 Can one of you shotgun nerds tell me the difference between these 3? Travis I don't consider myself a "shotgun nerd" but here goes. All the modern Benelli autoloaders use the same recoil inertia driven lockup system for their bolts, but a major difference between the 3 models you mentioned is the 2-piece receiver on the Legacy. There's a link to a good explanation on the Shotgunworld.com website ( http://www.shotgunworld.com/bbs/viewtopic.php?p=940247&highlight=#940247 ) which I copied & pasted below: There are basically two frame styles. The first is the heavier sprung four shot models. This would include the SBE, SBE II, M1, M2. The second is the lighter sprung five shot models. These would be the Montefeltro, Legacy, Cordoba, Ultra Light, Sport, Sport II, Super Sport, Executive.
The four shot group have shorter and wider forearms, don't cycle as light of loads, can take magazine extensions to hold more rounds, have pistol grip stocks as an option, come in turkey models, have rifled barrel options, have mid height ribs, and come in W/B, B/S, and Camo finishes.
The five shot group have longer and thinner forearms, cycle lighter loads better, can't take a magazine extension to hold more, have both low and mid height ribs, only one model comes in B/S or camo, one in synthetic, and the rest in W/B.
They have two receiver designs. A more normal one peice of the M2,M1,Montefeltro,Sport. And the two peice of the SBE,SBE II,Cordoba,Legacy,Sport II,Super Sport, Executive.
The SBE and SBE II has the top part of the receiver that is a barrel extension. The other two peice models have a tube that slides over the barrel extension which makes the top part of the receiver.
On the pre 05' models there were two different trigger groups. The two peice receivers shared the same ones and the one peice receiver models shared theirs. With the 05' and newer models there are now three trigger groups. The SBE II has it's own, the other two peice receiver shares one, and the one piece receiver shares theirs.
The lesser known and older Benelli SL (same as the Beretta ES100/Pintail) is a combination of the SBE receiver (3") and trigger group with every thing else like the five shot group. It also had a bottom locking lug instead of the rotary bolt face Benelli now uses on all of it's semi auto shotguns.
The Cordoba and SS are the same except for their finishes. They differ from the SBE II more than their chamber lengths. The SBE II has the full barrel extension for the upper receiver, different trigger group, non ported barrels, sprung heavier, and has a four shot magazine tube.
Pursuit may be, it seems to me, perfect without possession. Robert Kelley Weeks (1840-1876)
|
|
|
|
Joined: Jan 2007
Posts: 8,761
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2007
Posts: 8,761 |
My 20 gauge 1100's are 12 gauge framed guns with nicely figured upgraded wood and choke tubes added. The extra weight of the 12 gauge frame smooths the balance and swing. Doc
|
|
|
|
Joined: Aug 2007
Posts: 115,424 Likes: 13
Campfire Sage
|
Campfire Sage
Joined: Aug 2007
Posts: 115,424 Likes: 13 |
MT,
That is a good write up and thanks for the info.
I cannot see any advantage to going M2 vs. the Montefeltro in a 20gauge.
Can you?
Travis
Trump being classless,tasteless and clueless as usual. Sorry, trump is a no tax payin pile of shiit. My young wife decided to play the field and had moved several dudes into my house
|
|
|
|
Joined: Aug 2007
Posts: 115,424 Likes: 13
Campfire Sage
|
Campfire Sage
Joined: Aug 2007
Posts: 115,424 Likes: 13 |
My 20 gauge 1100's are 12 gauge framed guns with nicely figured upgraded wood and choke tubes added. The extra weight of the 12 gauge frame smooths the balance and swing. Doc I can't fathom any of this. Why would somebody want a 20 gauge built on a 12 gauge frame? Travis
Trump being classless,tasteless and clueless as usual. Sorry, trump is a no tax payin pile of shiit. My young wife decided to play the field and had moved several dudes into my house
|
|
|
|
Joined: Feb 2004
Posts: 17,141 Likes: 4
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2004
Posts: 17,141 Likes: 4 |
Working myself up to a 20ga Autoloader for sporting clays. Would like gun built on 20ga sized frame; one that will reliably shoot 7/8oz target loads; 28" VR CT barrel and can be expected to shoot 200 targets between cleaning and be reasonably easy to clean. Suggestions appreciated. Easy to clean, sounds like your looking for an inertia operated gun. Benelli Legacy, Montefeltro or M2 For simplicity and staying clean it's no contest between the inertia system and gas operated systems in favor of Benelli's inertia system. That not to say there are not some very good gas operated shotguns like the Berettas and some others. Sticking with Benelli's then, for light weight there is the Montefeltro, the Legacy (a fancied up Montefeltro), and the Ultralight-- the 20ga Ultralight may be close to 5.5 lbs (even the 12 is just at 6 lbs). The Ultralight is limited to one in the tube and two in the magazine if that matters, one of the weight saving measures. The M1/M2s may fit the bill too though maybe not as aesthetically pleasing.
|
|
|
|
Joined: Mar 2005
Posts: 11,708
Campfire Outfitter
|
Campfire Outfitter
Joined: Mar 2005
Posts: 11,708 |
My 20 gauge 1100's are 12 gauge framed guns with nicely figured upgraded wood and choke tubes added. The extra weight of the 12 gauge frame smooths the balance and swing. Doc I can't fathom any of this. Why would somebody want a 20 gauge built on a 12 gauge frame? Travis Doesn't make sense to me. I don't want a 16 gauge on the bigger frame either. Not for a hunting gun.
Every normal man must be tempted, at times, to spit on his hands, hoist the black flag, and begin slitting throats.
|
|
|
|
Joined: Jan 2007
Posts: 8,761
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2007
Posts: 8,761 |
My 20 gauge 1100's are 12 gauge framed guns with nicely figured upgraded wood and choke tubes added. The extra weight of the 12 gauge frame smooths the balance and swing. Doc I can't fathom any of this. Why would somebody want a 20 gauge built on a 12 gauge frame? Travis Doesn't make sense to me. I don't want a 16 gauge on the bigger frame either. Not for a hunting gun. Your right, my 12 gauge frame guns are not hunting guns but target guns. Both my 20 gauges are left handed 20 gauges built on 12 gauge frames. I wish Remington would build a lefty 20 gauge on the smaller frame. Doc
Last edited by doctor_Encore; 11/29/15.
|
|
|
|
Joined: Dec 2006
Posts: 2,135
Campfire Regular
|
Campfire Regular
Joined: Dec 2006
Posts: 2,135 |
MT, That is a good write up and thanks for the info. I cannot see any advantage to going M2 vs. the Montefeltro in a 20gauge. Can you? Travis IMO, it all depends on how the shotgun 'feels' in your hands, how it balances and swings for you, and how well you shoot it. Shotguns aren't rifles. By that I mean one can usually shoot rifles of radically different stock dimensions fairly well but IMO, a shotgun has to fit the shooter reasonably well for your best results. I've owned/shot a couple of Benellis (M1, M2, Montefeltro & 12/20gauges) over the years, and they don't all work for me, especially the ones with the tightly curved pistol grips. If possible, I would try before buying.
Pursuit may be, it seems to me, perfect without possession. Robert Kelley Weeks (1840-1876)
|
|
|
|
Joined: Dec 2006
Posts: 2,135
Campfire Regular
|
Campfire Regular
Joined: Dec 2006
Posts: 2,135 |
My 20 gauge 1100's are 12 gauge framed guns with nicely figured upgraded wood and choke tubes added. The extra weight of the 12 gauge frame smooths the balance and swing. Doc I can't fathom any of this. Why would somebody want a 20 gauge built on a 12 gauge frame? Travis Remember, the OP's questions specifically referred to a shotgun for sporting clays NOT hunting. In that case, I too would generally prefer a heavier gun for competition shooting. IMO, it's much easier for the average shooter (that be me ) to maintain their swing and follow-thru with a heavier gun.
Pursuit may be, it seems to me, perfect without possession. Robert Kelley Weeks (1840-1876)
|
|
|
|
67 members (7mm_Loco, 35, 6mmbrfan, 1_deuce, 338Rules, 8 invisible),
1,549
guests, and
873
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,193,450
Posts18,507,948
Members74,002
|
Most Online11,491 Jul 7th, 2023
|
|
|
|