Home Forums Gear Free Classifieds WTB - 30-06 BOSS System or 30-06 Barrel w/ BOSS

Hi All!

Title says it all, a BOSS System consisting of the Micro-Adjustable Locknut with Micrometer Adjustment Ring and the Body - either with Holes or the 'CR' version (conventional recoil) from a 30-06, OR a 30-06 Barrel with the BOSS installed, perfrably Stainless Steel;.

Please PM or leave a message at 410-Nine-zero-five- 9045

Thanks for reading.

Bump

Winchester or Browning?

Hi!

Sorry for late reply - Either one and a .375 H&H or .338WM would actually be preferred.

Thanks for the Response - Steve

what cal do you want ?

I have one somewhere off a Browning 30-06, removed it and installed the blank version. Let me look...

Thank you. The part I really need is the Knurled Nut that has the Micrometer Adjustment Ring on it. It is the smaller piece in the image -

[img]http://cdn-us-ec.yottaa.net/53ff2f503c881650e20004c9/www.brownells.com/v~13.5e/userdocs/products/p_149001836_2.jpg?yocs=p_s_&yoloc=us[/img]

They are Backordered since March and their Tech Rep says if it has been that long, they don't have anymoer. Spoke to Browning and they say they don't manufacture the BOSS anymore.

If this image does not show I'll try again. Thanks

Copy & Paste this URL to see the image. HTML is Off and Iguess I am not allowed use because I am a newb.

http://cdn-us-ec.yottaa.net/53ff2f503c881650e20004c9/www.brownells.com/v~13.5e/userdocs/products/p_149001836_2.jpg?yocs=p_s_&yoloc=us[/

Search Ended - I found one.