Here are close ups so everyone can see all my orbital scratches, deep cut marks from the blades and armature finishing work.
I want to make a POINT to let everyone know that the entire project,
from the first file cuts to bring the butt plate flush, to the last minute of the last coat of finish, on BOTH the fore-end AND the butt stock, took less than 2 hours.Of course there are days in-between the 2-3 minutes of work per day after the sanding was done, waiting for the oil to cure.
At cold temps and little sunlight, the process takes time to cure, but that's how natural oil finishes are. I don't count the curing time, only the actual work time.
This includes
all filing,
all scraping,
all sanding with 180, 220, 230, and 400 grits,
all time taken to whisker the wood,
all time to coat the wood,
all time to wet-sand the wood and every single minute I was touching the project.
I kept track so I can give an accurate account.
So the other "smiths" are likely to be very mad, because I am going to prove the Emperor really IS naked. I charge only a small amount for this kind of work because it's fast and easy.
I do not rip customers off!
More on the next panels below this one.
Others, who are upset are very probably ripping people off, telling them how tedious and labor intensive this kind of work is. It's not!
There are only 2 possibilities.
#1, They don't know how to do it, and their "extensive experience" is largely BS.
OR
#2 they are liars and they are overcharging folks. They can do so because of the ignorance of the customers.
I am curing that ignorance with this video and with my pictures. Now everyone will know that this kind of work should not be very expensive.
Some will say I am lying, but none of them will try it themselves and keep track of the time. So they will only heap lie upon lie to keep their prices up.
But their dishonestly will catch up to them because now every single reader who is not a liar will try what I showed here, and all will know who told them the truth.I did this work and the video for the benefit of shooters and gun enthusiasts out there, and I sincerely hope they will be blessed by this demonstration.
Any nay-sayers are encouraged
by me to not believe.
In fact, I hope they don't. Arguing with liberals, communists and these types is a waste of time. If they don't like the truth, such people will say the sky in not above anyone's head, gravity doesn't really work, and Trump is not a valid president. Same kind of logic is being publicly displayed here ....(or lack there-of.)
This thread reminds me very much of what we are seeing on TV of the anti-Trump com/libs. No amount of proof will work. So it’s not worth anyone’s time to try to convince them otherwise.
Here is one of these kind. Unfortunately we have many more in this country, some of which post here.
Facts and truth are not important to their arguments.
Some might not agree with her politics, but certainly agree with her tactics.
This thread is not for them. This tread is for those that want to learn an answer to the very 1st question posted on this tread. It was an open question to the reading public and I believe I have given a good answer.
Are there other answers?
I am sure there is. For those that have other answers I say “show us”
And they will be SURE to tell everyone that only THEY know about wood working and finishing, and anyone that disagrees with them is foolish. You gun owners have lying eyes. Don't believe your eyes! Believe them! Anyone that dumb should do exactly that.
If you all will go back and
read this whole thread to keep things in contest, I am sure anyone with average intelligence can follow along.
I do not and never did say I was the foremost expert on this subject. The thread was started with open questions about stripping Browning finishes.
I showed how I do it. You can do it any other way you like and that's ok with everyone,
especially me.To all those that did receive something valuable from these efforts, I wish you the best.
God bless and happy hunting.