Home Forums Hunting & Shooting Muzzleloaders Windex with Vinegar-D

Anyone just add household vinegar to regular Windex for cleaning BP fouling?

I just use use Windex. What would vinegar add to it? You can only get it so clean.

Carbon,
I would be leery of the vinegar as the acid could do some nasty things to bluing/browing if it found its way into the stock next to the barrel or lock.

I'm not sure what you'd gain by adding the vinegar except possibly some kinds of animal fat patch lube might dissolve easier(?) . Windex and some of the commercial cleaners do a really good job.

The Windex with Vinegar was something that Venturino found to be particularly effective which he wrote about several times. I tried it and it as good as he said. My bottle is getting low and now I am having trouble finding more locally.

Carbon,

Mike knows whereof he speaks when it comes to BP...

Was he referencing cleaning the bore with the vinegar solution or was he talking about cleaning cases? I have used it on BPCR brass and it did seem to work pretty well.

I just don't like the thought of anything that acidic coming in contact with the finished surface of the metal for any length of time. YMMV!

[quote=Johnny Dollar
Was he referencing cleaning the bore with the vinegar solution or was he talking about cleaning cases? [/quote]

MV wrote specifically about using the Windex w/ Vinegar-D spray to moisten patches used to swab out BP bore fouling. IIRC, he also mentioned to use the vinegar containing product and not to be confused with the ammonia containing product.

I've not experienced any issues with corrosion on the metal nor damage to the wood finish since using the Windex with Vinegar.

Good Stuff to Know!! I am going to trip do the local Wally World (shudder) and pick up some.

Thank you, Carbon 12

I use the Windex w/ vinegar pre-mix for BPCR and muzzleloaders - simple, works well ... and the mix doesn't freeze, so I leave it in the iron horse.

I use car windshield washing fluid with a dab of dawn. It does not freeze, and it does a really good job of cleaning at the range. I use a damp wipe between shots, and a heavy clean when I get ready to leave. At home Dawn in warm water. My barrels are always like new.

I've used the Widex w/vinegar with good results. Don't know what vinegar adds to cleaning the bore, and I think it more of use Windex w/vinegar and DO NOT use Windex with Ammonia.

Wife found and bought a 10 year supply of Windex plus vinegar at the local Target store. GTG.

For those interested, link to a castboolits thread on MV's Windex recipe:

http://castboolits.gunloads.com/showthread.php?63069-Recipe-for-Mike-Venturino-s-bore-cleaner-Windex

Wonder if anyone has actually done a test of cleaning with Windex and then going back and cleaning with Windex /vinegar to see if more fouling was present

Can't say as to whether there's any "accuracy" difference,.....but
Ammonia is something one doesn't want anywhere his prized (and damned expensive) BPCR brass.
Leaches zinc, chemically.

The confusion in the link from castboolits about where isopropyl alky comes into alla' this needs clarification / explanation here.
BPCR, BPCRLR, and Creedmoor shooters that "wipe every shot" will develop there own regimens, very much influenced by regional weather, .....heat, humidity, ambient temps .
Some years back in Az., we were using a wet windex vinegar patch, and then a patch or two damp with isopropyl alky and Murphy's oil soap,....some than dry patched and chamber swabbed. squadded on two relays sharing the same berm, I've watched Mike Venturino running his Sharps this way,....and later discussed the rationales therefor in the pits. Nice guy, Mr. Venturino,....knows his schidt, when it comes to BP.

GTC

I like Murphys. All I ever put in with the water. If I put anything in it at all.

Vinegar Windex is the very best BP cleaner I've ever used. Have not had to do the boiling water/dish soap cleansing in 20+ years and not a speck of rust or corrosion ever.

I've found a 1-4 Ballistol/water mix to be very effective in MLs. A bonus is that steel won't rust in a 1-10 mix, so the 1-4 is even more better. Another bonus is that after cleaning, straight Ballistol will mix with any residual mix that might be lurking in the nooks and crannies.

That combo kept my flinter pristine some years back, and it's how I plan to run my "new" Renegade, which will only be fed BP.

Still,no one has explained just what vinegar does to make it a good additive to Windex. Curious minds want to know

Good stuff here. The guys at a local muzzleloader club I used to belong to turned me onto this. Wipe my blades and leather down with it too.

Black Powder residues are ACIDIC

Vinegar is ALKALINE, .........neutralizes the acid.

GTC

Vinegar contains acetic acid. It's acidic, not alkaline.