Home Forums Gear Free Classifieds WTB case neck turning tool

Anyone have a good one or would recommend a tool that they have found to be a excellent tool. Thank you for your consideration

I’m not selling them, but the K&M system works very well for me. I prefere the carbide mandrel and carbide cutter, they’re just so much more slick and require a minimal amount of lubrication. FYI, I keep mine sitting in ice water between cuts. The temperature of the tool becomes an issue when your working to .0001”

Wayne

https://www.sinclairintl.com/reload...standard-neck-turning-kit-prod38664.aspx

I have the above kit from Sinclair and it worked well for me. I have used it on my 308, 284 aND 224. With their free shipping, if you only need it for one caliber, it would only be $90. Remember, you will need a way to measure the case neck thickness. Most people use a micrometer made for the job. I have used a Sinclair next sorting tool and it has worked fine for me. I have $130 into this kit and the other caliber mandrels and $90 into the neck sorting tool with the dial indicator. I would ship all of it to you for 160 If you want it.

I purchased rim thickness measuring equipment so I could decide what bushings to use in my Forster neck sizing dies. I just need the neck turning tool and cutter for the short mags.

Pm sent, I have a Forster if you're interested