|
Joined: Dec 2014
Posts: 2,973 Likes: 2
Campfire Regular
|
Campfire Regular
Joined: Dec 2014
Posts: 2,973 Likes: 2 |
Have you given H 414 a try? It works well for me.
|
|
|
|
Joined: Dec 2009
Posts: 10,653
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2009
Posts: 10,653 |
A long throat doesn't hurt accuracy (at least in benchrest terms) as long as it's close to bullet diameter--which prevents the bullet from tilting as it starts down the bore. But if the throat is considerably above bullet diameter, it sure can. The first Ruger No. 1A 7x57 owned, a red-pad obtained in a trade from a friend in the late 1980's, wouldn't shoot any bullet that wasn't seated very close to the lands, and no lead-core bullet under 160 grains would do that. It shot REALLY well with 160 Partitions and RL-22, but the case neck wasn't holding much of the bullet. I've turned back to working with a 700 Mtn Rifle, so chambered. It shoots Federal 175's and S+B 173's really well, but is cantankerous with other loads. I've gotten great accuracy with 154 Hornady SP's, but pitifully slow velocities. As of yesterday, 46.0 grains of H4350 would only get 'em to 2,425 fps. I'm tiptoeing upward to see if I can get 'em to the 2,700 fps range. The Gun Gack tome assures me this still oughta be safe territory in a strong "sucks" action. Granted, a load with R15 that pushed this bullet to a scant 2,350 fps dropped a Dall ram quite neatly, but that was before I'd run 'em across a chronograph. It's a wonder he hasn't climbed out of the freezer to go resume his place on the mountain. Perhaps he figured 'twas easier to just lay down, rather than face Ready's back-up shot... FC FC, that H4350 load is somewhat anemic when I look at the results I got in three different 7x57 rifle with the 154 gr Hornady InterLock. Let us know how it comes out when you give it a little more gas..
Last edited by roundoak; 01/12/18.
You're Welcome At My Fire Anytime
|
|
|
|
Joined: Dec 2009
Posts: 10,653
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2009
Posts: 10,653 |
I picked up a used tang safety M77 7x57 recently at a LGS that had the stock butchered. Rather than locate a replacement stock, I want to put it in a synthetic stock. Any suggestions?
You're Welcome At My Fire Anytime
|
|
|
|
Joined: May 2007
Posts: 5,749
Campfire Tracker
|
Campfire Tracker
Joined: May 2007
Posts: 5,749 |
Have you given H 414 a try? It works well for me. I gave that one a whirl a while back, but got poor groups and velocity. FC, that H4350 load is somewhat anemic when I look at the results I got in three different 7x57 rifle with the 154 gr Hornady InterLock. Let us know how it comes out when you give it a little more gas.. Will do. I wanted to start cautiously, and even there I had a hard time trying to reconcile Hornady 10th, Lyman's 50th, Barnes #4, and some other sources. MD writes in Gack that, what with the throating being all over the board, different rifles may need up to 3 grains different amounts of powder to produce like velocities with a given bullet. I figured I'd start at a "consensus" safe charge, and work up. To this point, the groups, at least, are encouraging. I've got loads prepped up to 48.5 grains H4350, and I'll get 'em downrange once my new glasses arrive, and weather permits. Results to follow. Thanks, FC
"Every day is a holiday, and every meal is a banquet."
- Mrs. FC
|
|
|
|
Joined: Dec 2009
Posts: 10,653
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2009
Posts: 10,653 |
FC, that 48,5 grs H4350 is about where the loads in my three rifles ended up. 48-49 grains. Velocity range is 2750 fps to 2800 fps. Two rifles have 24" barrels and the other 22" barrel.
You're Welcome At My Fire Anytime
|
|
|
|
Joined: May 2007
Posts: 5,749
Campfire Tracker
|
Campfire Tracker
Joined: May 2007
Posts: 5,749 |
I saw that in one of your posts a while back, and that's what I used as a rough guide as I made this last batch. Many Thanks. Once I get this rifle squared-away, this will be my next 7x57 load work-up project: The traditionalist in me demands I stick with 175's. For now, the Federal Blue Box load prints well enough. Hopefully I can bloody it on a hog come March. FC
"Every day is a holiday, and every meal is a banquet."
- Mrs. FC
|
|
|
|
Joined: Dec 2009
Posts: 10,653
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2009
Posts: 10,653 |
What model is that rifle?
You're Welcome At My Fire Anytime
|
|
|
|
Joined: May 2007
Posts: 5,749
Campfire Tracker
|
Campfire Tracker
Joined: May 2007
Posts: 5,749 |
What model is that rifle? I really don't know. People have told me it's a "98" of some persuasion. I measure 42" overall, which I'm told is short for a mauser. The barrel measures 21 3/8" from the front of the receiver. Googling brings up terms like, "Standard Model" or, "Post Office Model", but I'm not sure it fits neatly into any of those boxes. All I know is that Rockchucker trolled me past a pawn shop in '15, and I left there with the thing under my arm. I had a fella put a taller front blade on it, on account of it shot way high. It feels great in hand, and I still need to bloody it. FC
"Every day is a holiday, and every meal is a banquet."
- Mrs. FC
|
|
|
|
Joined: Dec 2014
Posts: 2,973 Likes: 2
Campfire Regular
|
Campfire Regular
Joined: Dec 2014
Posts: 2,973 Likes: 2 |
That action would be a good beginning for a custom rifle.
|
|
|
|
Joined: Dec 2002
Posts: 32,243 Likes: 2
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Dec 2002
Posts: 32,243 Likes: 2 |
It is obviously a German military large ring 98 Mauser. It has a Nazi eagle Waffenamt stamp on the root of the bolt handle, so the bolt appears to be WW2 vintage, but the lack of Waffenamt stamps elsewhere makes me wonder if the bolt isn't original to this rifle and if the bolt is newer than the rest of the parts with matching numbers.
German military Mausers were chambered in 8x57, so if this is your next 7x57 project, I assume that it either has been rebarreled or you are going to rebarrel it. It looks kind of rough, maybe stored under poor conditions after it was captured, I don't recall seeing another 98 with a divot like the one in the receiver bridge.
Last edited by 260Remguy; 01/13/18. Reason: corrected grammar/punctuation
|
|
|
|
Joined: May 2007
Posts: 5,749
Campfire Tracker
|
Campfire Tracker
Joined: May 2007
Posts: 5,749 |
It's definitely chambered in 7x57. If the barrel was replaced, 'twas done long ago as the current one has external pitting nearly equal to that on the receiver, & the the blueing is gone from the muzzle. I've read some pieces that talk about Standard and/or Banner models that were originally chambered in 7x57, so I wonder if it might have gone to China, Bolivia, Ethiopia, etc. as an export gun?
The bore is probably a mess - I haven't looked. But, she shoots as well as I can see these days.
The extractor has definitely been replaced, as has the bolt release, and the bottom metal looks different than the rest of the receiver. It's not a total mutt, but I knew I wasn't getting a collector piece, either. I just wanted something that locked-up tightly, and could take a hog or 3.
FC
Last edited by Folically_Challenged; 01/13/18.
"Every day is a holiday, and every meal is a banquet."
- Mrs. FC
|
|
|
|
Joined: Nov 2003
Posts: 3,612
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2003
Posts: 3,612 |
It is obviously a German military large ring 98 Mauser. It has a Nazi eagle Waffenamt stamp on the root of the bolt handle, so the bolt appears to be WW2 vintage, but the lack of Waffenamt stamps elsewhere makes me wonder if the bolt isn't original to this rifle and if the bolt is newer than the rest of the parts with matching numbers.
German military Mausers were chambered in 8x57, so if this is your next 7x57 project, I assume that it either has been rebarreled or you are going to rebarrel it. It looks kind of rough, maybe stored under poor conditions after it was captured, I don't recall seeing another 98 with a divot like the one in the receiver bridge. I believe you are correct about the bolt not being original as the rifle has crown over N proof mark.
Shew me thy ways, O LORD: teach me thy paths. "there are few better cartridges on Earth than the 7 x 57mm Mauser" "the .30 Springfield is light, accurate, penetrating, and has surprising stopping power"
|
|
|
|
Joined: Jun 2010
Posts: 14,006 Likes: 6
Campfire Outfitter
|
Campfire Outfitter
Joined: Jun 2010
Posts: 14,006 Likes: 6 |
A Nazi Mauser in 7x57? Odd.
|
|
|
|
Joined: Nov 2015
Posts: 19,272 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2015
Posts: 19,272 Likes: 2 |
|
|
|
|
Joined: May 2002
Posts: 10,046 Likes: 3
Campfire Outfitter
|
Campfire Outfitter
Joined: May 2002
Posts: 10,046 Likes: 3 |
A few years ago someone was importing VZ24s in 7X57MM and most of them were rough, but they didnt last long at the prices they sold for, LGS in my area had them for $229 if I remember correctly. I havent seen a Mark X in 7X57MM in a long time and they used to be everywhere you looked.
|
|
|
|
Joined: Nov 2003
Posts: 3,612
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2003
Posts: 3,612 |
I've turned back to working with a 700 Mtn Rifle, so chambered. It shoots Federal 175's and S+B 173's really well, but is cantankerous with other loads. I've gotten great accuracy with 154 Hornady SP's, but pitifully slow velocities. As of yesterday, 46.0 grains of H4350 would only get 'em to 2,425 fps. I'm tiptoeing upward to see if I can get 'em to the 2,700 fps range. The Gun Gack tome assures me this still oughta be safe territory in a strong "sucks" action. Granted, a load with R15 that pushed this bullet to a scant 2,350 fps dropped a Dall ram quite neatly, but that was before I'd run 'em across a chronograph. It's a wonder he hasn't climbed out of the freezer to go resume his place on the mountain. Perhaps he figured 'twas easier to just lay down, rather than face Ready's back-up shot... FC Would like to see some pics of that ram if you have any. How far away was he?
Shew me thy ways, O LORD: teach me thy paths. "there are few better cartridges on Earth than the 7 x 57mm Mauser" "the .30 Springfield is light, accurate, penetrating, and has surprising stopping power"
|
|
|
|
Joined: Jun 2009
Posts: 3,188
Campfire Tracker
|
Campfire Tracker
Joined: Jun 2009
Posts: 3,188 |
Looks nice, always like those Lightweights...never seen one with factory irons. I’d keep it in its original furniture if it were mine.
Stuck in airports, Terrorized Sent to meetings, Hypnotized Over-exposed, Commercialized Handle me with Care... -Traveling Wilbury's
|
|
|
|
Joined: May 2007
Posts: 5,749
Campfire Tracker
|
Campfire Tracker
Joined: May 2007
Posts: 5,749 |
Would like to see some pics of that ram if you have any. How far away was he?
He was pushing 300 yards, but the downhill angle was so steep that the drop was likely closer to 100. If you download the Chrome or Safari add-on to let you see photobucket pics, he should be on these threads: IIIIIFC
"Every day is a holiday, and every meal is a banquet."
- Mrs. FC
|
|
|
|
Joined: Nov 2003
Posts: 3,612
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2003
Posts: 3,612 |
Shew me thy ways, O LORD: teach me thy paths. "there are few better cartridges on Earth than the 7 x 57mm Mauser" "the .30 Springfield is light, accurate, penetrating, and has surprising stopping power"
|
|
|
|
Joined: Dec 2002
Posts: 32,243 Likes: 2
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Dec 2002
Posts: 32,243 Likes: 2 |
It's possible that you have a Brazilian Model 1935 with a replacement bolt or, since it would have been made when the Nazi party was in power, the Waffenamt stamp was applied to the bolt on all Oberndorf Mausers, even the export guns. The odd things is that you'd expect an export military Mauser to have the country crest stamped on the receiver ring rather than the Mauser banner. The proof marks on your rifle look exactly like a picture of Brazilian 1935 that I found on the internet.
|
|
|
|
544 members (222Sako, 22kHornet, 25aught6, 222ND, 270wsmnutt, 10Glocks, 57 invisible),
2,567
guests, and
1,280
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,380
Posts18,527,525
Members74,031
|
Most Online11,491 Jul 7th, 2023
|
|
|
|