|
Joined: Nov 2013
Posts: 28,879 Likes: 13
Campfire Ranger
|
OP
Campfire Ranger
Joined: Nov 2013
Posts: 28,879 Likes: 13 |
Actually saw two, both .243s, for sale in GB last night. Also one .223/5.56 on Gun Genie. Looks like $400 is the ballpark street price.
Pretty nice wood on the .243s.
Also, the NRA site has a review on a "brass" shotgun (URK!🤢) and a .223/5.56. Not very comprehensive, but no malfunctions anyway.
What fresh Hell is this?
|
|
|
|
Joined: Jan 2001
Posts: 28,406 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2001
Posts: 28,406 Likes: 2 |
The accuracy of the centerfire was something I was interested in. While they were only able to shoot at 50 yards (explained in the article) it definitely shows some potential. Groups from the .4's through the .7's extrapolate to .8's up to 1.4" but that was factory ammo and what I understand to be five shot groups, not three. NRA Review
Gunnery, gunnery, gunnery. Hit the target, all else is twaddle!
|
|
|
|
Joined: Jun 2012
Posts: 971
Campfire Regular
|
Campfire Regular
Joined: Jun 2012
Posts: 971 |
Five shots is pretty standard and then I want to see 4 groups (NRA 5, box ammo =4). Some prefer 10 shots but; I feel to much information is lost. Certainly acceptable and proper to allow some time to cool between shots. Thank you for posting the review. The NRA is till my most trusted source for reviews, short of having a friend or club member or my own Good write up. I would call this a solid 1 moa performer. I dont care about the worse ammo. The rifle is 223 - so that probably helps in the accuracy dept. The best performer of the test set was Norma USA's 77-gr. Sierra Match King hollow point boat tail load with a best single group of 0.44" with an average of 0.53". The report 6 pound trigger pull and note the weight (bare rifle) is over 7 pounds. Pretty close to varmint weight for a 223, but not unreasonable for something like 45/70 or any over 30 caliber option. I may give one a try if I can just decide on what caliber would fill what nitch? I wish it was more like 5 pounds. That would make a handy woods rifle in 44mag.
|
|
|
|
Joined: Jul 2011
Posts: 5,179
Campfire Tracker
|
Campfire Tracker
Joined: Jul 2011
Posts: 5,179 |
Am I a true looney for thinking that I want one in .243 or .308 that is immediately sent off to JES for a .358 rebore?
Some people are educated beyond their intelligence.
|
|
|
|
Joined: Jan 2016
Posts: 2,350
Campfire Regular
|
Campfire Regular
Joined: Jan 2016
Posts: 2,350 |
.243 and .308 always read .358 to me...
Music washes away the dust of everyday life Some people wait a lifetime to meet their favorite hunting and shooting buddy. Mine calls me dad
|
|
|
|
Joined: Jun 2012
Posts: 971
Campfire Regular
|
Campfire Regular
Joined: Jun 2012
Posts: 971 |
Am I a true looney for thinking that I want one in .243 or .308 that is immediately sent off to JES for a .358 rebore? You maybe loony, but; not crazy. That should make a dandy 358. Just for my notebook, who is JES?
|
|
|
|
Joined: Apr 2013
Posts: 4,966 Likes: 1
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2013
Posts: 4,966 Likes: 1 |
Charter Member Ancient order of the 1895 Winchester
"It's an insecure and petite man who demands all others like what he likes and dislike what he dislikes." szihn
|
|
|
|
Joined: Oct 2004
Posts: 26,599 Likes: 18
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2004
Posts: 26,599 Likes: 18 |
Reeds had a 44 Magnum with absolutely gorgeous wood about a month or so ago. I am mad at myself for not buying it.
|
|
|
|
Joined: Jun 2012
Posts: 971
Campfire Regular
|
Campfire Regular
Joined: Jun 2012
Posts: 971 |
thanks Mitch, book marked.
I though it would be more cost. Not bad 225 or so...
|
|
|
|
Joined: Sep 2004
Posts: 2,701
Campfire Regular
|
Campfire Regular
Joined: Sep 2004
Posts: 2,701 |
I was looking at the .44 Mag. Anyone know who has the single shots for sale?
|
|
|
|
Joined: Oct 2004
Posts: 26,599 Likes: 18
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2004
Posts: 26,599 Likes: 18 |
I was looking at the .44 Mag. Anyone know who has the single shots for sale? They are few and far between at this point.
|
|
|
|
Joined: Jul 2011
Posts: 5,179
Campfire Tracker
|
Campfire Tracker
Joined: Jul 2011
Posts: 5,179 |
There are a FEW on GunBroker.
Some people are educated beyond their intelligence.
|
|
|
|
Joined: Jun 2002
Posts: 813
Campfire Regular
|
Campfire Regular
Joined: Jun 2002
Posts: 813 |
Id like to see them do a 22 or 17 Hornet.....Once they get production up and running better.
|
|
|
|
Joined: Feb 2018
Posts: 10,156 Likes: 4
Campfire Outfitter
|
Campfire Outfitter
Joined: Feb 2018
Posts: 10,156 Likes: 4 |
I hope they make a .41magnum.........but they would probably be ridiculously expensive like all other .41 rifles.
|
|
|
|
Joined: Sep 2007
Posts: 3,612
Campfire Tracker
|
Campfire Tracker
Joined: Sep 2007
Posts: 3,612 |
I hope they make a .41magnum.........but they would probably be ridiculously expensive like all other .41 rifles. I would spring for one of those for sure, they do make a 41 lever gun so there is hope for a single shot.
Gerry.
|
|
|
|
Joined: Jan 2016
Posts: 2,350
Campfire Regular
|
Campfire Regular
Joined: Jan 2016
Posts: 2,350 |
Has anyone noticed how high off the tang the release lever is? I handled one at Reeds and it was the first thing I noticed about the gun. I asked if they were all like that and he just nodded. Besides being very fugly I can see it being a problem. One good whack and it could break off.
Music washes away the dust of everyday life Some people wait a lifetime to meet their favorite hunting and shooting buddy. Mine calls me dad
|
|
|
|
Joined: Nov 2013
Posts: 28,879 Likes: 13
Campfire Ranger
|
OP
Campfire Ranger
Joined: Nov 2013
Posts: 28,879 Likes: 13 |
If it's cast or MIM, it might very well break off.
I was hot for these, but have cooled off. I want to handle one before I buy, that's for sure.
What fresh Hell is this?
|
|
|
|
Joined: Oct 2004
Posts: 26,599 Likes: 18
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2004
Posts: 26,599 Likes: 18 |
Has anyone noticed how high off the tang the release lever is? I handled one at Reeds and it was the first thing I noticed about the gun. I asked if they were all like that and he just nodded. Besides being very fugly I can see it being a problem. One good whack and it could break off. The tang isn't a particularly vulnerable area is it?
|
|
|
|
Joined: Jan 2016
Posts: 2,350
Campfire Regular
|
Campfire Regular
Joined: Jan 2016
Posts: 2,350 |
Has anyone noticed how high off the tang the release lever is? I handled one at Reeds and it was the first thing I noticed about the gun. I asked if they were all like that and he just nodded. Besides being very fugly I can see it being a problem. One good whack and it could break off. The tang isn't a particularly vulnerable area is it? Murphy's law...
Music washes away the dust of everyday life Some people wait a lifetime to meet their favorite hunting and shooting buddy. Mine calls me dad
|
|
|
|
Joined: Jan 2001
Posts: 28,406 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2001
Posts: 28,406 Likes: 2 |
Industry scuttlebutt is that Henry bought a bunch of Remington 700 bolt handles and with some modifications re-purposed them as release levers, so they should be unbreakable... Kidding aside, I am still optimistic about these but like Pappy348 would like to see one in hand before making up my mind.
Gunnery, gunnery, gunnery. Hit the target, all else is twaddle!
|
|
|
|
Joined: Nov 2017
Posts: 347
Campfire Member
|
Campfire Member
Joined: Nov 2017
Posts: 347 |
I've prowled local shops and big box stores from Tulsa, Oklahoma to Beaumont, Texas with stops in Mississippi and Louisiana along the way since they came out and have yet to lay paws on one.... I figure they'll catch on in Louisiana or Mississippi quickly for the primitive weapons season uses.
|
|
|
|
Joined: Jun 2012
Posts: 971
Campfire Regular
|
Campfire Regular
Joined: Jun 2012
Posts: 971 |
I had a chance to handle one in a gun shop the other day. Observation and question.
The observation, the hammer was bit too low, narrow and hard to cock quickly while bringing the rifle to shoulder. The spring is also very stiff. All this, compared to the old H&R which I could handle very quickly. That is a problem for me.
The question, what is the safety or procedure to carry a loaded gun while hunting? Not a nit pick, just a question. There is no transfer bar. No 1/2 cock. No safety button, lever or latch. I asked the clerk, he had no idea. Maybe some one here can fill me in.
|
|
|
|
Joined: Jan 2001
Posts: 28,406 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2001
Posts: 28,406 Likes: 2 |
According to Henry's website, "The action has no external manual safety; it uses a rebounding hammer that can’t touch the firing pin unless the trigger’s deliberately pulled."
Gunnery, gunnery, gunnery. Hit the target, all else is twaddle!
|
|
|
|
Joined: Jun 2012
Posts: 971
Campfire Regular
|
Campfire Regular
Joined: Jun 2012
Posts: 971 |
Thanks Jim.
I guess, then it can be carried cocked with all fingers outside the trigger guard. I guess? Or keep the hammer down until.
If I had one, I would have to study the parts diagram and look closer at the reciever. I like the transfer bar, others dont. Being able to see the bar makes me more confident than having some internal lock out. It must be ok. I am not going to worry about any more for now.
|
|
|
|
Joined: Feb 2018
Posts: 10,156 Likes: 4
Campfire Outfitter
|
Campfire Outfitter
Joined: Feb 2018
Posts: 10,156 Likes: 4 |
I just wonder if they are more accurate than other models of the same type. I've not heard a lot of good things about H&R, NEF, etc., being real consistent shooters.
|
|
|
|
Joined: Nov 2013
Posts: 28,879 Likes: 13
Campfire Ranger
|
OP
Campfire Ranger
Joined: Nov 2013
Posts: 28,879 Likes: 13 |
The test I read of a .223 was positive. Certainly they should be accurate enough for ordinary purposes. Never owned one of the others you mention, but have read they're good shooters, but sometimes sensitive to forend tension. My cousin bought a 20ga slug gun because everyone said they were so accurate. He spent about $200 trying to find a slug load it liked before he gave up and unloaded it.😜
What fresh Hell is this?
|
|
|
|
Joined: Oct 2002
Posts: 96,121 Likes: 1
Campfire Oracle
|
Campfire Oracle
Joined: Oct 2002
Posts: 96,121 Likes: 1 |
"Dear Lord, save me from Your followers"
|
|
|
|
Joined: Nov 2013
Posts: 28,879 Likes: 13
Campfire Ranger
|
OP
Campfire Ranger
Joined: Nov 2013
Posts: 28,879 Likes: 13 |
That'd work, though considering all the loading stuff I have, a .308 makes more sense.
There's a free .30/30 in every .308 box.
What fresh Hell is this?
|
|
|
|
Joined: Jun 2012
Posts: 971
Campfire Regular
|
Campfire Regular
Joined: Jun 2012
Posts: 971 |
I just wonder if they are more accurate than other models of the same type. I've not heard a lot of good things about H&R, NEF, etc., being real consistent shooters. I think the NEF were pretty good guns. I am sorry they are gone. Chuck Hawks (no accuray testing) on the Handy rifle. http://www.chuckhawks.com/nef_rifles.htmSome discussion on this forum: https://thefiringline.com/forums/showthread.php?t=450568This pretty well sums it up They seem to run the gamut from astounding to acceptable. And finally a review on the Henry, from the American Rifleman (edit, I did not notice this was already linked, I guess not everyone follows all the links, me included) https://www.americanrifleman.org/articles/2017/12/20/tested-henry-single-shot-shotguns-and-rifles/RE, the Henry - IMHO- this is outstanding accuracy (edit: sorry. I though this was 100 yards, well even at 50 it is more than just good hunting accuracy) Black Hills Ammunition 60-gr. soft points printed a best five-shot group of 0.69" with a five group average of 0.77". Gorilla Ammunition's 69-gr. Sierra Match King open-tip match load yielded a best group of 0.61" with an average of 0.69". The best performer of the test set was Norma USA's 77-gr. Sierra Match King hollow point boat tail load with a best single group of 0.44" with an average of 0.53".
|
|
|
|
Joined: Oct 2002
Posts: 96,121 Likes: 1
Campfire Oracle
|
Campfire Oracle
Joined: Oct 2002
Posts: 96,121 Likes: 1 |
That'd work, though considering all the loading stuff I have, a .308 makes more sense.
There's a free .30/30 in every .308 box. I'm not a fan of rimless anything in break action firearms
"Dear Lord, save me from Your followers"
|
|
|
|
Joined: Aug 2009
Posts: 9,920 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: Aug 2009
Posts: 9,920 Likes: 1 |
I just wish someone would revive the 219 Savage with a forged steel receiver. A 45-70, 30-40 Krag,38-55 and 44 mag with a .429 bored barrel with a twist that would handle 300 grain cast would find a home here
|
|
|
|
Joined: Jan 2014
Posts: 4,980
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2014
Posts: 4,980 |
I just wish someone would revive the 219 Savage with a forged steel receiver. A 45-70, 30-40 Krag,38-55 and 44 mag with a .429 bored barrel with a twist that would handle 300 grain cast would find a home here I recommend building a time machine. Such a gun ,if built today would cost WAAAAAY more than you would be willing to spend.
|
|
|
|
Joined: Aug 2009
Posts: 9,920 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: Aug 2009
Posts: 9,920 Likes: 1 |
I just wish someone would revive the 219 Savage with a forged steel receiver. A 45-70, 30-40 Krag,38-55 and 44 mag with a .429 bored barrel with a twist that would handle 300 grain cast would find a home here I recommend building a time machine. Such a gun ,if built today would cost WAAAAAY more than you would be willing to spend. doubt it would be way more than I was willing to spend
|
|
|
|
Joined: Jun 2012
Posts: 971
Campfire Regular
|
Campfire Regular
Joined: Jun 2012
Posts: 971 |
I just wish someone would revive the 219 Savage with a forged steel receiver. A 45-70, 30-40 Krag,38-55 and 44 mag with a .429 bored barrel with a twist that would handle 300 grain cast would find a home here I had to google the 219 savage. Right away, I see a better looking gun.!! Damn !! Easy reach, big hammer. Slender graceful stock. Why is it so difficult? I dont get it, are people really this stupid? And why would that cost more than any one would spend? Why would a Henry exact clone of the 219 cost a nickel more? I dont see any big manufacturing challenge. I was naive enough to expect to see something more/less like this from Henry. The Henry is heavy too. I dont care if the receiver is forged. That is not important to me. The strength vs weight can be achieve multiple ways. All internet chatter aside, I might just add the 219 in 30/30 to my long term watch list.
|
|
|
|
Joined: Nov 2013
Posts: 28,879 Likes: 13
Campfire Ranger
|
OP
Campfire Ranger
Joined: Nov 2013
Posts: 28,879 Likes: 13 |
Read up on those a bit before you buy. Not all barrels are interchangeable on all frames. Older guns cock when the lever is operated. Newer ones have a draw bar that cocks when the action is broken.
Also, watch for the firing pin sticking in the fired position, which can give you a surprise when you load and close it.
I picked up a .410 a couple of years ago that had been nicely restored long ago. Neat little gun.
What fresh Hell is this?
|
|
|
|
Joined: Aug 2009
Posts: 9,920 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: Aug 2009
Posts: 9,920 Likes: 1 |
219 was an internal hammer, forged steel receiver to handle higher pressure than cast
|
|
|
|
Joined: Jun 2012
Posts: 971
Campfire Regular
|
Campfire Regular
Joined: Jun 2012
Posts: 971 |
Google failed me, I looked at an image that looked like a hammer. I like the lines.
Henry seems challenged for the proper look and feel for the whole product line.
|
|
|
|
Joined: Nov 2010
Posts: 269
Campfire Member
|
Campfire Member
Joined: Nov 2010
Posts: 269 |
The original Savage 219 was made for a few years before WWII, and built at the old Savage works in Utica, New York. Those rifles, like the model 220 shotgun were striker-fired. The post-war version, or at least one post-war version, (219A? 219B?) built in Massachusetts, had an internal hammer. I would not think the pre-war 219 would have a problem with the firing pin sticking forward since it was a long striker which was cocked as the gun was opened.
Last edited by Ploughman; 02/19/18.
|
|
|
|
Joined: Jun 2015
Posts: 1,928
Campfire Regular
|
Campfire Regular
Joined: Jun 2015
Posts: 1,928 |
Yes. Early 219s were strikers. And it is totally a pain to change the firing pins if broken. That said I changed mine. Hornet barrel in the original .223 size. I drop the charge a bit and shoots quite well. Ex FIL had one in 30-30. Have no idea where it is now. A slim, graceful package.
Society of Intolerant Old Men. Rifle Slut Division
|
|
|
|
Joined: Nov 2010
Posts: 3,153
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2010
Posts: 3,153 |
I agree that if anyone if going to revive a break-open single shot, the Savage 219 is the one, especially the Utica version which had a walnut stock and a much more graceful STEEL trigger guard than later models. With modern manufacturing methods, you could make the barrels much more interchangeable than the originals, too. An American European-style stalking rifle or "kipplauf", like the Germans say. A .25-35 WCF with modern bullets would be the nuts for medium game where you didn't need to shoot a country mile. So would a .243.
I think fourbore is looking at a different rifle. Savage 219s are all hammerLESS. They have a tang safety just like a fancy double shotgun. Quick and positive. I have three, all with fitted Savage 220 shotgun barrels (the "old 220," not the current bolt action rifled shotguns that use a 110-style action).
Was Mike Armstrong. Got logged off; couldn't log back on. RE-registered my old call sign, Mesa. FNG. Again. Mike Armstrong
|
|
|
|
Joined: Jun 2012
Posts: 971
Campfire Regular
|
Campfire Regular
Joined: Jun 2012
Posts: 971 |
I was looking at a poor quality image of a 219. I could see the overall profile. The top of the receiver was unclear.
|
|
|
|
Joined: Feb 2004
Posts: 31
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Feb 2004
Posts: 31 |
I like em and like the 44 the 243 and maybe the 308.If they had a 30-30 my money would be in the mail.
|
|
|
|
Joined: Oct 2004
Posts: 26,599 Likes: 18
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2004
Posts: 26,599 Likes: 18 |
More and more of these are showing up on Gun Broker. The wood on most of them has good to very good character. Street prices are running 369-399. As soon as one with good wood shows up in 44 magnum, I am going to buy it.
|
|
|
|
Joined: May 2016
Posts: 220
Campfire Member
|
Campfire Member
Joined: May 2016
Posts: 220 |
Was in a LGS this morning. They had one next to a Long Ranger. I didn't realize at first it was the single shot. So, I asked to look at it. Turned out to be a 243, which I wasn't looking for. But, the fit and finish was really nice. Action opened smoothly. The lever wasn't a problem where it was. I expect the fit and finish on all of them would be the same. Anyway, happened to look on Bud's this evening and they had them in 223. Mine is on layaway now. I hope that eventually, they will make them in .357. If they do, I'll have one of those also.
|
|
|
|
Joined: Oct 2004
Posts: 26,599 Likes: 18
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2004
Posts: 26,599 Likes: 18 |
Was in a LGS this morning. They had one next to a Long Ranger. I didn't realize at first it was the single shot. So, I asked to look at it. Turned out to be a 243, which I wasn't looking for. But, the fit and finish was really nice. Action opened smoothly. The lever wasn't a problem where it was. I expect the fit and finish on all of them would be the same. Anyway, happened to look on Bud's this evening and they had them in 223. Mine is on layaway now. I hope that eventually, they will make them in .357. If they do, I'll have one of those also. Keep us posted on it. I want to know how it shoots.
|
|
|
|
Joined: Jan 2013
Posts: 332
Campfire Member
|
Campfire Member
Joined: Jan 2013
Posts: 332 |
Anybody know the twist on the .223 ?
|
|
|
|
Joined: Jan 2001
Posts: 28,406 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2001
Posts: 28,406 Likes: 2 |
According to their website, 1 in 9".
Gunnery, gunnery, gunnery. Hit the target, all else is twaddle!
|
|
|
|
Joined: Mar 2006
Posts: 19,505
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2006
Posts: 19,505 |
Was in a LGS this morning. They had one next to a Long Ranger. I didn't realize at first it was the single shot. So, I asked to look at it. Turned out to be a 243, which I wasn't looking for. But, the fit and finish was really nice. Action opened smoothly. The lever wasn't a problem where it was. I expect the fit and finish on all of them would be the same. Anyway, happened to look on Bud's this evening and they had them in 223. Mine is on layaway now. I hope that eventually, they will make them in .357. If they do, I'll have one of those also. A .357 Magnum rechambered to .357 Maximum would grab my interest.
4 out of 5 Great Lakes prefer Michigan.
|
|
|
|
Joined: Sep 2005
Posts: 17,740 Likes: 1
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2005
Posts: 17,740 Likes: 1 |
And I think they would sell a bunch of 357 maximums
Deer Camp! about as good as it gets!
|
|
|
|
Joined: Jun 2015
Posts: 1,928
Campfire Regular
|
Campfire Regular
Joined: Jun 2015
Posts: 1,928 |
Society of Intolerant Old Men. Rifle Slut Division
|
|
|
|
Joined: Feb 2007
Posts: 4,397
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2007
Posts: 4,397 |
I'm with Steelhead. The 30/30 is the FIRST round they should have brought these out in.
|
|
|
|
Joined: Sep 2011
Posts: 45,281 Likes: 22
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Sep 2011
Posts: 45,281 Likes: 22 |
I put some of my raffle tickets in the bucket for one Saturday night at the NRA Friend's banquet. It looked 'presentable" , I don't own a .243 yet, I like single shots, the tickets were already paid for, there weren't a whole lot of other interesting guns. I figured why not................................. I didn't win. Will be nice to see a review when someone on here gets a hold of one. They need to chamber them in more interesting calibers. If not, they're diss'n loonies! Geno
The desert is a true treasure for him who seeks refuge from men and the evil of men. In it is contentment In it is death and all you seek (Quoted from "The Bleeding of the Stone" Ibrahim Al-Koni)
member of the cabal of dysfunctional squirrels?
|
|
|
|
Joined: Oct 2006
Posts: 2,204
Campfire Regular
|
Campfire Regular
Joined: Oct 2006
Posts: 2,204 |
Would love a 357 max for Michigan zone 3. Hope they make it
44 mag might be in my future though
I like it
|
|
|
|
Joined: Mar 2015
Posts: 423
Campfire Member
|
Campfire Member
Joined: Mar 2015
Posts: 423 |
I finally picked up a Henry single shot 44 mag.,fit & finish are very good,it has a nice deep blue on the barrel,and the wood is above average with both figure and grain in a medium/dark finish.Hopefully with some more snow melt I will be able to get to my range in the woods and shoot it. Sorry ,I don't do pics!
|
|
|
|
Joined: Oct 2004
Posts: 26,599 Likes: 18
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2004
Posts: 26,599 Likes: 18 |
I finally picked up a Henry single shot 44 mag.,fit & finish are very good,it has a nice deep blue on the barrel,and the wood is above average with both figure and grain in a medium/dark finish.Hopefully with some more snow melt I will be able to get to my range in the woods and shoot it. Sorry ,I don't do pics! You teased us like that only to tell us no pics? Where did you get it?
|
|
|
|
Joined: Mar 2015
Posts: 423
Campfire Member
|
Campfire Member
Joined: Mar 2015
Posts: 423 |
PB, after a couple of shops couldn't get one I found a fairly local shop that Henry listed as a flagship dealer and he came through for me. Near the little town of Chenango Forks ny.
|
|
|
|
Joined: Apr 2012
Posts: 919
Campfire Regular
|
Campfire Regular
Joined: Apr 2012
Posts: 919 |
Keep us posted. Looking forward to a range report.
|
|
|
|
Joined: Nov 2013
Posts: 28,879 Likes: 13
Campfire Ranger
|
OP
Campfire Ranger
Joined: Nov 2013
Posts: 28,879 Likes: 13 |
What fresh Hell is this?
|
|
|
|
Joined: Mar 2015
Posts: 423
Campfire Member
|
Campfire Member
Joined: Mar 2015
Posts: 423 |
|
|
|
|
Joined: Mar 2015
Posts: 423
Campfire Member
|
Campfire Member
Joined: Mar 2015
Posts: 423 |
I finally did a bit of range work with my Henry single shot 44 mag.I tried various loads at fifty yards with the issue open sights and due to 66 year old eyes ,the results were varied!I decided that a peep sight would better suite my needs,rather than a scope,as my main purpose was to keep weight to a minimum.Williams WGRS #17778 looked like it would work.The mounting holes lined up perfectly,but I needed to remove about a 1/4" of material at the rear of the sight for a proper fit.Back at the range bullet impact was 12" high at 50 yards with the peep at it's lowest setting!I installed a taller Marble front sight with an ivory bead and went back to the range.Hornady 240&300 grain XTP's and Lyman #429630 265 gr. hpgc bullets clustered in nice tight groups.These were all hand loads using W296/H110 powder.Beartooth 250gr. gas checks didn't shoot well at all,but I haven't had much luck with that bullet in a couple other 44 mags either! I've got some LBT/cast performance 260gr. gas checks that I'll try next. All in all ,I'm happy with the Henry.By the way,the williams peep sight is made to fit H&R's!
|
|
|
|
Joined: Mar 2015
Posts: 3,591 Likes: 2
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2015
Posts: 3,591 Likes: 2 |
Hey Tom, If you want to try some Cast Performance 300 grain WFNGC in your Henry let me know.
Wag more, bark less.
The freedoms we surrender today will be the freedoms our grandchildren will never know existed.
The men who wrote the Second Amendment didn't just finish a hunting trip, they just finished liberating a nation.
|
|
|
|
Joined: Nov 2013
Posts: 28,879 Likes: 13
Campfire Ranger
|
OP
Campfire Ranger
Joined: Nov 2013
Posts: 28,879 Likes: 13 |
Nice work!
Another option on sone rifles is to install the Williams open sight with a peep insert instead of a blade. I did that on a Browning Low Wall .44 and was surprised at how well I could shoot with it. Now I have the same setup on a TC Renegade, but haven't shot it yet.
What fresh Hell is this?
|
|
|
|
Joined: Mar 2015
Posts: 423
Campfire Member
|
Campfire Member
Joined: Mar 2015
Posts: 423 |
RR, yes i'd like to try some of those 300's,i'll run into you sooner or later!
|
|
|
|
Joined: Mar 2015
Posts: 423
Campfire Member
|
Campfire Member
Joined: Mar 2015
Posts: 423 |
Pappy,thanks for the info.
|
|
|
|
Joined: Jan 2001
Posts: 28,406 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2001
Posts: 28,406 Likes: 2 |
Nice work!
Another option on sone rifles is to install the Williams open sight with a peep insert instead of a blade. I did that on a Browning Low Wall .44 and was surprised at how well I could shoot with it. Now I have the same setup on a TC Renegade, but haven't shot it yet. Interesting (heartening?) to see you like that setup, too. I've been using Mojo sights on my milsurps, they are an adjustable peep sight mounted into the original military rear sight fixture out on the barrel. I'll not claim they allow as much precision as a true receiver mounted peep but you can still do some pretty good shooting with them. IME they are way, way ahead of using open sights with a rear notch, especially as our eyes get older. Heck, I'd bet younger eyes could make even better use of them.
Gunnery, gunnery, gunnery. Hit the target, all else is twaddle!
|
|
|
|
Joined: Jun 2012
Posts: 971
Campfire Regular
|
Campfire Regular
Joined: Jun 2012
Posts: 971 |
To get the aperture, centering effect, the hole has to be close to the eye. Mounted down on the barrel you have a hole, which is just an alternative to a notch. One may work better than the other for a given situation or shooter.
I was curious about this and got a fairly good discussion and pointers to literature when I asked about mounting a peep on a hand cannon pistol or long range single shot pistol. Bottom line, ZERO, benefit and nobody does it. I am sorry, I dont remember where I was. It is not a question of less benefit, there simple is none. None with regard to the aperture. Might be just the ticket for an individual for some other specific individual.
|
|
|
|
Joined: Feb 2007
Posts: 872
Campfire Regular
|
Campfire Regular
Joined: Feb 2007
Posts: 872 |
Autofive, got a question, wouldn't it be more beneficial to mount a scope on it for testing purposes? And then mount your open sights. Seems to me it would be easier to ring it out that way to get the full potential of the rifle. I'm very interested because I plan on getting a .44 also.
Thanks, Doug
|
|
|
|
Joined: Jan 2001
Posts: 28,406 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2001
Posts: 28,406 Likes: 2 |
Okay, I'll agree to disagree with you. I see a terrific improvement over using an original notch rear sight, not just on well defined aiming points but in general field work as well.
The comments on a handgun may shed some light on the situation, perhaps the effect lessens the further away from the eye the aperture is placed. On my three rifles so equipped, the rear sight is approximately 15" from my eye. On a handgun that sight is some 26" away. I've already noted that the barrel mounted peep isn't as precise as a receiver mounted peep and that lessening could certainly be directly proportional to distance, but the centering effect is definitely there. You mount the rifle and focus on the front sight only, the eye still automatically centers it in the aperture which is just a fuzzy looking hole. Like any peep, your eye isn't shifting focus from the front to rear sight continuously. One caveat, obviously, is to match the aperture to the use. A small .05" or even .09" diameter aperture won't work, it requires what amounts to a ghost ring sight.
I've only tried it for me so can't say how someone else would use it but to conclude that there is no benefit at all for anyone - on a rifle - I cannot agree with that.
Gunnery, gunnery, gunnery. Hit the target, all else is twaddle!
|
|
|
|
Joined: Mar 2015
Posts: 423
Campfire Member
|
Campfire Member
Joined: Mar 2015
Posts: 423 |
Douginla,I'm getting fifty yard groups with three shots just about touching with a couple loads,where I hunt eighty yards is a long shot,most are under fifty.For my purposes it is doing all that I need it to.By the way ,I'm heading down to Farmerville at the end of May.
|
|
|
|
Joined: Feb 2007
Posts: 872
Campfire Regular
|
Campfire Regular
Joined: Feb 2007
Posts: 872 |
Thanks, sounds like my woods. Even 80yds is a long shot.
|
|
|
|
Joined: Nov 2013
Posts: 28,879 Likes: 13
Campfire Ranger
|
OP
Campfire Ranger
Joined: Nov 2013
Posts: 28,879 Likes: 13 |
I thought the same way until I tried it. It's likely not as fast as one close to the eye, but t does allow me to center it quite well, and the results on-target were quite acceptable. There are a couple of similar setups on the market, even for handguns. For my vision, it's better than an open sight.
EDIT: This is an expedient for rifles that aren't d&t for a receiver sight or, in the case of my Low Wall, where I was trying to have two sight setups for different loads available. Closer to the eye is better, but this works.
Last edited by Pappy348; 04/21/18.
What fresh Hell is this?
|
|
|
|
Joined: Jun 2012
Posts: 971
Campfire Regular
|
Campfire Regular
Joined: Jun 2012
Posts: 971 |
Auto,
You maybe onto something at a practical level. And you post a question,I cannot answer. The 'magic' effect is when the aperture is close enough to the eye. At that point you do not have to work to center the front bead in the hole to hit the aim point. The aperture is similar to using a 1x scope. At some distance, and I dont know how far, you want to keep the bead centered. That is line up 3 points, front, rear and target. The round hole may still be a significant help, without the effect. At the end of the day this rear hole sighting system is working for you and may help others.
I did some reading and there is a way to test. I dont plan to do this. Just for the sake of conversation I will toss this out there. On a target rifle, the shooter can line up the bulls eye. Then move his had side to side and the front bead will stay on the bull. That is the magic. The bead will be off center and yet the poi is he same. As some point, with the hole mounted at a greater distance moving the head from side to side (putting the bead off center) will change the point of aim.
That above head movement is the same method used to test for parallax when adjusting the Objective on a scope. In fact the above effect is parallax.
|
|
|
|
Joined: Mar 2015
Posts: 423
Campfire Member
|
Campfire Member
Joined: Mar 2015
Posts: 423 |
4Bore,your post sounds reasonable. All I know is that my set up works for me.I'll find out how well come November!
|
|
|
|
Joined: Oct 2004
Posts: 26,599 Likes: 18
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2004
Posts: 26,599 Likes: 18 |
I handled one of these in 223 last week. I was pretty darned impressed. The wood had a lot of character. The fit was better than most #1s I have seen lately. The blue was nicer than The NEF and H&R single shots. As soon as I find one in 44 magnum with decent wood, I am buying it.
|
|
|
|
Joined: Feb 2016
Posts: 17,835
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2016
Posts: 17,835 |
To get the aperture, centering effect, the hole has to be close to the eye. Mounted down on the barrel you have a hole, which is just an alternative to a notch. One may work better than the other for a given situation or shooter.
I was curious about this and got a fairly good discussion and pointers to literature when I asked about mounting a peep on a hand cannon pistol or long range single shot pistol. Bottom line, ZERO, benefit and nobody does it. I am sorry, I dont remember where I was. It is not a question of less benefit, there simple is none. None with regard to the aperture. Might be just the ticket for an individual for some other specific individual. Wouldn't a peep on a handgun make it pretty much set for one yardage? With a bladed rear sight there is a hard edge reference for positioning the front at varied elevations (some front sights have marks to help with that as well). By holding the front high in the rear, you can shoot a longer distance and not cover up the target.
|
|
|
|
Joined: Nov 2013
Posts: 28,879 Likes: 13
Campfire Ranger
|
OP
Campfire Ranger
Joined: Nov 2013
Posts: 28,879 Likes: 13 |
Shooting with both eyes open lets your off-eye see "around" the sights, so that's not an issue. Not everyone can do that, I know. At ordinary handgun distances, I don't see a problem, and even out there a bit, you can likely still raise that blade a bit within the peep, which isn't that tight (no reference line though).
What fresh Hell is this?
|
|
|
|
Joined: Apr 2006
Posts: 1,396
Campfire Regular
|
Campfire Regular
Joined: Apr 2006
Posts: 1,396 |
Hey Tom, If you want to try some Cast Performance 300 grain WFNGC in your Henry let me know. HSM 305gr "Bear Loads" form cloverleafs in my Ruger #3. just got some Bear Tooth Bullets in 280gr lfn and 330 wfn both GC to try in it and my TC 444.
Never try to teach a pig to sing... ...it wastes your time and annoys the pig!
|
|
|
|
Joined: Sep 2012
Posts: 180
Campfire Member
|
Campfire Member
Joined: Sep 2012
Posts: 180 |
I've been looking for a Ruger No 1 in 45-70 for a while and just can't bring myself to pay what folks are asking. I recently bought a Henry Long Ranger in 223 and am very impressed with the fit, finish, and accuracy. I think a Henry Steel Single Shot in 45-70 for about a third the price of the Ruger may be the way to go.
Member: NRA Ohio Gun Collectors Association
|
|
|
|
Joined: Nov 2013
Posts: 28,879 Likes: 13
Campfire Ranger
|
OP
Campfire Ranger
Joined: Nov 2013
Posts: 28,879 Likes: 13 |
Won't cost much to find out.
What fresh Hell is this?
|
|
|
|
Joined: Feb 2008
Posts: 11,694 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: Feb 2008
Posts: 11,694 Likes: 1 |
Picked up my 45-70 today. Should be fun......or not. Need time to test it out now. Decent walnut, fit and finish are pretty good too. Serial number under 10
____________________________________________________________ Dying gets closer every day
Lloyd McCarter and the Honky Tonk Revival
|
|
|
|
Joined: Oct 2002
Posts: 96,121 Likes: 1
Campfire Oracle
|
Campfire Oracle
Joined: Oct 2002
Posts: 96,121 Likes: 1 |
Nice Jim, are you scoping it?
I'm still waiting for them to offer them in 30/30
"Dear Lord, save me from Your followers"
|
|
|
|
Joined: Feb 2008
Posts: 11,694 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: Feb 2008
Posts: 11,694 Likes: 1 |
Hey Scott, I'm going to try irons first. If I do, I have an M8 3X to try on it. Seems to handle pretty nicely. Almost like a single bbl shotgun. Comes up good, at least for me.
____________________________________________________________ Dying gets closer every day
Lloyd McCarter and the Honky Tonk Revival
|
|
|
|
Joined: Jan 2014
Posts: 4,980
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2014
Posts: 4,980 |
Hey Scott, I'm going to try irons first. If I do, I have an M8 3X to try on it. Seems to handle pretty nicely. Almost like a single bbl shotgun. Comes up good, at least for me.
How stout of loads do you in intend to shoot in it? The specs show just a hair under 7lbs
|
|
|
|
Joined: Sep 2004
Posts: 2,701
Campfire Regular
|
Campfire Regular
Joined: Sep 2004
Posts: 2,701 |
Let me know how you like it once you shoot it. I'm still thinking that one in .44 Mag would be nice, especially with the 20" twist! Is it drilled and tapped over the chamber. If so, how close are the holes nearest the receiver? Wanting to know if I can mount an XS style receiver sight on it.
|
|
|
|
Joined: Feb 2008
Posts: 11,694 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: Feb 2008
Posts: 11,694 Likes: 1 |
It takes an H&R scope base. I think the last two holes nearest receiver are an inch apart. Have measure other.
I'll try and find what it likes for ammo. If it's stout then so be it.
____________________________________________________________ Dying gets closer every day
Lloyd McCarter and the Honky Tonk Revival
|
|
|
|
Joined: Sep 2004
Posts: 2,701
Campfire Regular
|
Campfire Regular
Joined: Sep 2004
Posts: 2,701 |
Thanks Jim.
Good luck finding the right ammo, heck, that's half the fun.
|
|
|
|
Joined: Oct 2002
Posts: 96,121 Likes: 1
Campfire Oracle
|
Campfire Oracle
Joined: Oct 2002
Posts: 96,121 Likes: 1 |
That's the beauty of the 45/70, you don't need stout loads to kill dinosaurs with it. A 400'ish gr cast bullet with a lot of meplat pushing along a little past sonic speed.
"Dear Lord, save me from Your followers"
|
|
|
|
Joined: Sep 2005
Posts: 17,740 Likes: 1
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2005
Posts: 17,740 Likes: 1 |
I killed alot of stuff useing the Rem. 405 ammo, a 400lb bear and a Buffalo in a 1907 Winchester 1886 Light weight rifle also a truck load of Deer!
Deer Camp! about as good as it gets!
|
|
|
|
607 members (219DW, 160user, 219 Wasp, 1lessdog, 1minute, 1badf350, 68 invisible),
2,471
guests, and
1,301
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,193,188
Posts18,503,372
Members73,993
|
Most Online11,491 Jul 7th, 2023
|
|
|
|