|
|
Joined: Feb 2016
Posts: 17,821
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2016
Posts: 17,821 |
Hunting spot small now, try to keep a low profile..........ladder stands too easy to see from the road. Deer sneak behind barn and neighbors house, hop road into the thicket. Behind barn in early bow should be good (landowner owns both sides).
|
|
|
|
Joined: Feb 2016
Posts: 17,821
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2016
Posts: 17,821 |
I used screws and bolts for my standsl. The screws were gold colored. Never snapped one. Had to tighten them a couple of times (every other yr?) Predrilled the foot pieces and then screwed them onto the runners. Ladders were sections, held together by bolts. Silver shiny big ones. Washers used under heads and nuts. All spray painted. After 6 or 8 yrs (maybe longer?), the untreated wood got light/soft. I unbolted the sections and dumped them. Fun projects though.
Last edited by hookeye; 06/23/18.
|
|
|
|
Joined: Aug 2010
Posts: 28,131 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2010
Posts: 28,131 Likes: 2 |
Pressure treated ladders work well and last a long time. One caveat though... USE NAILS to attach the steps to the rails. Screws will break at times and the added stress induced by swelling of the wood from the weather makes them a threat long after they go into use. Cheap azz screws will break, but nails will pull out from the shrinking and swelling of the wood (temperature changes). Buy some good screws /lags.
|
|
|
|
Joined: Aug 2003
Posts: 13,945
Campfire Outfitter
|
Campfire Outfitter
Joined: Aug 2003
Posts: 13,945 |
Back when I used to build our deer stands and climbing rungs using treated wood and big nails nailed directly in live trees I noticed that the nail heads would get 'pulled' deeper and deeper into the surface of the treated lumber each year I assume due to the tree's growth. Over three - four years the nail heads would be sunk into the surface of lumber as much as 1/2" or more eventually making it feel rickety. Have had some nail heads pull far enough through thinner climbing rungs that they pulled loose from the tree under weight.
|
|
|
|
Joined: Dec 2006
Posts: 1,594
Campfire Regular
|
Campfire Regular
Joined: Dec 2006
Posts: 1,594 |
|
|
|
|
Joined: Aug 2014
Posts: 5,026 Likes: 2
Campfire Tracker
|
Campfire Tracker
Joined: Aug 2014
Posts: 5,026 Likes: 2 |
I've built and hunted out of home built wooden stands. You have to test them out every year to make sure they are still sturdy.I use a combination of nails and screws. Nails have more shear strength and screws keep the nails from pulling out. If they are the least bit questionable strength wise I rebuild the weakness or take them down. I don't have anything but metal stands currently.
|
|
|
|
Joined: Feb 2017
Posts: 2,355
Campfire Regular
|
Campfire Regular
Joined: Feb 2017
Posts: 2,355 |
We build some shooting houses, but there is one thing that makes me lean towards metal down here in South Alabama...wasps. They usually are around all but the last couple weeks of January. Sometimes all season. And they love wood structures. We spend over $100 and a more than a few hours every season just getting a handful of shooting houses clear of those spawn of satan.
However, I am planning on replacing a wooden ladder to one of them. I think I may actually drill large holes and use 3/8" bolts with nuts to attach the rungs to the legs.
|
|
|
|
82 members (35, 444Matt, Akhutr, 7mm_Loco, 1_deuce, 338reddog, 8 invisible),
1,514
guests, and
779
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,368
Posts18,488,303
Members73,970
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|