|
|
Joined: Dec 2010
Posts: 266
Campfire Member
|
OP
Campfire Member
Joined: Dec 2010
Posts: 266 |
Looking for some help repairing a rem 788 action trigger stud. I have an action that has it broke all the way off, was looking for some help to get a hole drilled in teh correct area so i can put a threaded stud in. looking at 1/4x28 thread hole and i can then machine a screw down to fit it. Not that bad of a job to do drilling wise i just dont have a milling machine or a machining vise to work with my drill press, and before i scap it or have to spend like $130 to do it though i would put it out there. Thank you
|
|
|
|
Joined: Nov 2005
Posts: 10,365
Campfire Outfitter
|
Campfire Outfitter
Joined: Nov 2005
Posts: 10,365 |
done a few of 788's that had that problem over the years, you are going about it the right way with a threaded stud and mill to fit.
|
|
|
|
581 members (16gage, 10gaugeman, 10ring1, 10gaugemag, 12344mag, 53 invisible),
2,497
guests, and
1,266
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,193,051
Posts18,501,050
Members73,987
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|