|
Joined: Jan 2016
Posts: 573
Campfire Regular
|
OP
Campfire Regular
Joined: Jan 2016
Posts: 573 |
[b][/b] I picked up a Weatherby Mark-V in 375 H&H on GB. It showed it with a Synthetic stock which I am OK with, until I took the stock off for a better look at. It was not original to the rifle. Someone replaced it and had to open up the barrel channel to get it in the stock. Not a very good job either. I have been looking around about Weatherby contours. It looks like I don't have a standard #4 contour but with smaller barrel OD. The dimensions are good for a #4 contour but my barrel muzzle is only .730. Which appears to shows smaller than a #4 barrel channel. The tapper on the barrel being 2" looks correct for a #4. It is a 9 lug bolt. Any ideas on getting a correct fitting stock? Could I get a #4 contour stock and have it look like it is free floated with the smaller .730 barrel?
I am just your average Joe.
|
|
|
|
Joined: Apr 2007
Posts: 3,362
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2007
Posts: 3,362 |
Bedding it won't"fix" the problem? Steelbed.
|
|
|
|
Joined: Jan 2016
Posts: 573
Campfire Regular
|
OP
Campfire Regular
Joined: Jan 2016
Posts: 573 |
Bedding it won't"fix" the problem? Steelbed. When they opened up the stock channel, they left the barrel touching in over half the area it is able to touch. If I was going to keep this stock, I would have to open it up even more. I would rather get a correct fitting stock if I could somehow. My barrel is .730 at the muzzle, Weatherby #4 contour muzzle would be .830 according to the chart I was looking at.
Last edited by rodeojoe; 06/10/19.
I am just your average Joe.
|
|
|
|
Joined: Apr 2010
Posts: 8,184 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: Apr 2010
Posts: 8,184 Likes: 1 |
If it’s a factory barrel a call to Weatherby with the serial number would likely be the easiest way to get the right stock. If it’s a decent synthetic and not a milk jug injection molded stock I’d just open it up and bed it. Probably be better than factory that way anyway
|
|
|
|
Joined: Jan 2016
Posts: 573
Campfire Regular
|
OP
Campfire Regular
Joined: Jan 2016
Posts: 573 |
If it’s a factory barrel a call to Weatherby with the serial number would likely be the easiest way to get the right stock. If it’s a decent synthetic and not a milk jug injection molded stock I’d just open it up and bed it. Probably be better than factory that way anyway You are making me feel pretty stupid! Enjoy it while you can. ![crazy crazy](/ubbthreads/images/graemlins/default/crazy.gif)
I am just your average Joe.
|
|
|
|
Joined: Dec 2007
Posts: 3,362
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2007
Posts: 3,362 |
As said if the stock is worth the effort uou might consider openning the channel up. Then put several layers of masking tape the length of the barrel, bed the entire barrel channel. This provided a freefloated barrel that should look acceptable. You can add micro beads to the barrel bedding compound to reduce weight if desired.
|
|
|
|
Joined: Jan 2001
Posts: 58,548 Likes: 6
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2001
Posts: 58,548 Likes: 6 |
Rifles talk...simply shoot the fhuqking thing and listen.
Hint...................
Brad says: "Can't fault Rick for his pity letting you back on the fire... but pity it was and remains. Nothing more, nothing less. A sad little man in a sad little dream."
|
|
|
|
Joined: Jan 2016
Posts: 573
Campfire Regular
|
OP
Campfire Regular
Joined: Jan 2016
Posts: 573 |
I called Weatherby, left a message, also sent them a email. Have not heard back from them yet. The first letters in the serial number are SB. That makes it produced 1995-2002. The stock on it is the Tupperware type(cheap). Since it is not original to the rifle, don't know what was factory on it. I would like to put a good synthetic stock replacement on it. If I can find one under $300 that will fit it right.
I am just your average Joe.
|
|
|
|
Joined: Jan 2001
Posts: 58,548 Likes: 6
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2001
Posts: 58,548 Likes: 6 |
Actually shooting a platform,tends to reveal much.
Hint.................
Brad says: "Can't fault Rick for his pity letting you back on the fire... but pity it was and remains. Nothing more, nothing less. A sad little man in a sad little dream."
|
|
|
|
Joined: Jul 2005
Posts: 6,785
Campfire Tracker
|
Campfire Tracker
Joined: Jul 2005
Posts: 6,785 |
Old Corps
Semper Fi
FJB
|
|
|
|
63 members (Akhutr, beefan, 358wsm, 2500HD, bosshoff, 13 invisible),
1,380
guests, and
730
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,243
Posts18,485,924
Members73,967
|
Most Online11,491 Jul 7th, 2023
|
|
|
|