|
Joined: Jan 2018
Posts: 23,506
Campfire Ranger
|
OP
Campfire Ranger
Joined: Jan 2018
Posts: 23,506 |
That my dad left me. It’s a featherweight that still wears the Leupold 3-9 he put on the rifle when he bought it new...
I’ve killed a few deer with it...Missed a lot more. I moved away from it quickly as a teen, buying myself a 7mag and never looking back.
I want to resurrect this fine rifle that has always shot well printing 1 MOA on paper. Where should I start with shelf ammo and what bullet and weight?
The rifle is a nostalgia rig that if I can get it shooting well. I would carry it opening day of deer season in remembrance of my dad.
Suggestions from the 06 lovers is appreciated. Updated set and forget optic will happen, if I can find a load it likes.
Thanks, Beaver 😎
Curiosity Killed the Cat & The Prairie Dog “Molon Labe”
|
|
|
|
Joined: Jun 2017
Posts: 2,430
Campfire Regular
|
Campfire Regular
Joined: Jun 2017
Posts: 2,430 |
Do you remember what your dad shot out of it?
If so, that's what I'd use... Even if it didn't give the best groups.
It doesnt take teeny tiny little groups to kill deer, so if he had a favorite load, that's what I'd look for.
-Jake
Small Game, Deer, Turkey, Bear, Elk....It's what's for dinner.
If you know how many guns you own... you don't own enough.
In God We Trust.
|
|
|
|
Joined: Dec 2004
Posts: 3,639
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2004
Posts: 3,639 |
Where should I start with shelf ammo and what bullet and weight? You could do a lot worse than a box of Remington 150 grain corelokts.
|
|
|
|
Joined: Feb 2010
Posts: 17,815
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2010
Posts: 17,815 |
My .30-06 M/70 shoots 165gr. better than 150gr., I'd try both to see which your rifle shoots more accurately.
|
|
|
|
Joined: Aug 2009
Posts: 20,824
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2009
Posts: 20,824 |
The rules require you to use Nosler partitions in pre-64 M70's......
Originally Posted by Judman PS, if you think Trump is “good” you’re way stupider than I thought! Haha
Sorry, trump is a no tax payin pile of shiit.
|
|
|
|
Joined: May 2005
Posts: 2,083
Campfire Regular
|
Campfire Regular
Joined: May 2005
Posts: 2,083 |
Any bullet under 180 gr in a 30-06 is like a dog that weighs less than 40 lbs. It's basically a cat, and cats are pointless For serially, though, Federal Blue Box of your preferred weight works well on deer.
|
|
|
|
Joined: Jan 2012
Posts: 1,114
Campfire Regular
|
Campfire Regular
Joined: Jan 2012
Posts: 1,114 |
|
|
|
|
Joined: Feb 2007
Posts: 7,431
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2007
Posts: 7,431 |
Nosler custom ammo. Preferably 165 grain Beav.
You only live once, but...if you do it right, once is enough.
|
|
|
|
Joined: Dec 2010
Posts: 19,240
Campfire Ranger
|
Campfire Ranger
Joined: Dec 2010
Posts: 19,240 |
150 grain Federal Fusion shoots great in my .30-06. So does the regular Federal blue box stuff.
|
|
|
|
Joined: Dec 2005
Posts: 2,932
Campfire Regular
|
Campfire Regular
Joined: Dec 2005
Posts: 2,932 |
Always used 150 gr on deer in .30-06. They always provided a complete pass through. Core-Lokt was what I primarily used. If forced to shoot factory '06 today, it'd be Federal Blue Box or Fusion.
|
|
|
|
Joined: Jul 2001
Posts: 60,119
Campfire Kahuna
|
Campfire Kahuna
Joined: Jul 2001
Posts: 60,119 |
In my experience just about any inexpensive factory "deer ammo" shoots pretty well these days. Have had good luck with Federal blue box, Hornady American Whitetail, Remington Core-Lokt and Winchester Power Point.
The big problem may turn out not to be the ammo but the rifle's stock. Believe it or not, when the pre-'64 Featherweight was introduced in 1952, the forend was called "full floating," which meant free-floating. It lacked the forend screw that kept the barrel firmly connected to the stock, but also wasn't really free-floated (that happened with the post-'64 Model 70). As a result, the barrel often sort of rattled around in the forend, resulting in suck accuracy--what was common in the early reviews of pre-'64 Featherweights, which some reviewers attributed to the "too thin" barrel. The first Featherweights were all .308's, and some of the groups fired during a test by AMERICAN RIFLEMAN were over 4 inches, though some were around two. (Those were 5-shot groups, still the standard group-size for AR testing.) And since the pre-'64 stocks are made out of wood, they can warp slightly over time due to humidity.
There are ways to fix this if it occurs in your rifle. You can epoxy bed either the entire forend channel, or just the tip of the forend, providing a barrel-vibration damper like the "speed bump" still used in many factory stocks today,
Or you can place a plastic shim or two between the front of the action and the stock, just behind the recoil lug, really free-floating the barrel. This is what I did with an early .308 Featherweight purchased a couple years ago, whereupon it started shooting sub-inch groups. This technique has the advantage of not permanently altering an original rifle.
“Montana seems to me to be what a small boy would think Texas is like from hearing Texans.” John Steinbeck
|
|
|
|
Joined: Dec 2009
Posts: 5,211
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2009
Posts: 5,211 |
Where should I start with shelf ammo and what bullet and weight? You could do a lot worse than a box of Remington 150 grain corelokts. Mine shoots the 150 corLokts terribly. It shoots 165 and 180 Sierra Gamekings very well. Also shoots the 110 Sierra Varminter well too.
|
|
|
|
Joined: Jan 2006
Posts: 430
Campfire Member
|
Campfire Member
Joined: Jan 2006
Posts: 430 |
I would first make sure the scope is still holding a zero. You might want to put a scope on it that you know works (holds zero and tracks well) and take it to the range.
|
|
|
|
Joined: Apr 2013
Posts: 4,959
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2013
Posts: 4,959 |
If it's going to be a "nostalgia rig....... in remembrance of my dad" use it as your dad set it up. "......always shot well printing 1 MOA", make sure it's clean and the screws are tight and it'll probably do the same now. What more do you need???
Charter Member Ancient order of the 1895 Winchester
"It's an insecure and petite man who demands all others like what he likes and dislike what he dislikes." szihn
|
|
|
|
Joined: Jan 2018
Posts: 23,506
Campfire Ranger
|
OP
Campfire Ranger
Joined: Jan 2018
Posts: 23,506 |
Funny, that the this 06 was always the bane of my existence. Dad had piled up the animals with it in his lifetime-akin to magic in his hands.
I use it the first time and kill a deer, then precede to whiff at several deer in the following seasons. Excuse? Distance I imagine.
Dad changed hunting areas from the East side of our State where close encounters with Mule Deer were common in the 60’s and 70’s to hunting Blacktail on the Coastal West side where shots were easily 300 yards or more.
Those Blacktails were hard for me to connect with using his 06.
Thanks for the help, All...
Beaver 😎
Curiosity Killed the Cat & The Prairie Dog “Molon Labe”
|
|
|
|
Joined: Apr 2010
Posts: 8,176
Campfire Outfitter
|
Campfire Outfitter
Joined: Apr 2010
Posts: 8,176 |
I’d probably buy a few boxes of Fusions or Hornady of either 150 or 165 grain persuasion. Stick a 2-7 Redfield on it in the lowest Talleys I could get my hands on and go shoot a deer.
I’ve got a 50’s FWT 30/06 a friend gave me as a birthday gift a few years back. It will pile up 168 TSXs over 4064 but that’s not necessary for deer. I did bed the recoil lug and the flat of the action just as insurance to keep the stock from cracking.
|
|
|
|
Joined: May 2005
Posts: 14,104
Campfire Outfitter
|
Campfire Outfitter
Joined: May 2005
Posts: 14,104 |
I bought mine in the summer of 1961. Didn't get a scope on it until the following summer. Shot mostly 150-grain Core-Lokts, and they went into 3 inches or so at 100 yards pretty consistently. When I went back to Austin for the beginning of my sophomore year of college, I dropped it off with an old gunsmith downtown who tweaked the bedding and the trigger for me. It has shot ammo it likes sub-moa, ever since.
I had it redone with a nice walnut blank and a new blue job several years ago, and it still goes deer and elk hunting with me at least once or twice each year.
Ben
Some days it takes most of the day for me to do practically nothing...
|
|
|
|
Joined: Apr 2011
Posts: 151,367
Campfire Savant
|
Campfire Savant
Joined: Apr 2011
Posts: 151,367 |
150 Partitions be perfect for deer size game.
|
|
|
|
Joined: May 2013
Posts: 480
Campfire Member
|
Campfire Member
Joined: May 2013
Posts: 480 |
Hey Mule Deer
I like the shim method myself, something about taking wood away never sounds good to me.
Some cause happiness wherever they go; others whenever they go
Oscar Wilde~~
|
|
|
|
Joined: Aug 2010
Posts: 48,050
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,050 |
JB's suggestion is excellent for a collector's piece. However, so many of the pre 64's have been tampered with, making them prime candidates for a good glass bedding job and full freefloat. The featherweight rifles can shoot surprisingly well, if this is done. Ill start a thread in the proper forums here soon, regarding proper glass bedding and freefloat of the pre 64 model 70. Pre 64 rifles had very good barrels, right out of the factory.
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
468 members (2500HD, 260Remguy, 1_deuce, 260madman, 1minute, 160user, 53 invisible),
2,499
guests, and
1,294
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,856
Posts18,478,531
Members73,948
|
Most Online11,491 Jul 7th, 2023
|
|
|
|