|
Joined: Jul 2013
Posts: 1,877
Campfire Regular
|
OP
Campfire Regular
Joined: Jul 2013
Posts: 1,877 |
I'm having a 280AI built . Noticed Nosler 280ai brass and Hornady. I don't anneal so what you think about the Nosler brass? I know it's weight sorted, etc but dang it's high compared to Hornady.
HMM-161, HMM-364 Semper Fi Brothers
|
|
|
|
Joined: Jun 2004
Posts: 44,856 Likes: 3
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2004
Posts: 44,856 Likes: 3 |
Some very good 280AI brass says Lapua 30-06 on the head. ![grin grin](/ubbthreads/images/graemlins/default/grin.gif)
|
|
|
|
Joined: Sep 2004
Posts: 8,173
Campfire Outfitter
|
Campfire Outfitter
Joined: Sep 2004
Posts: 8,173 |
Some very good 280AI brass says Lapua 30-06 on the head. ![grin grin](/ubbthreads/images/graemlins/default/grin.gif) That's how I'd roll too . . .
|
|
|
|
Joined: Jan 2010
Posts: 8,017 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2010
Posts: 8,017 Likes: 1 |
Nosler is just the headstamp. It is Norma brass. Very good, and worth it not to fireform. I'd use that any day over Hornady.
If you are going to fireform, then Lapua would be the only reason to fireform brass for it.
|
|
|
|
Joined: Sep 2016
Posts: 1,313
Campfire Regular
|
Campfire Regular
Joined: Sep 2016
Posts: 1,313 |
Nosler if you value your time. Hornady, sort, and sell the leftovers if you want minimum $.
|
|
|
|
Joined: Oct 2006
Posts: 24,411 Likes: 5
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2006
Posts: 24,411 Likes: 5 |
Nosler is just the headstamp. It is Norma brass. Very good, and worth it not to fireform. I'd use that any day over Hornady.
If you are going to fireform, then Lapua would be the only reason to fireform brass for it. Not so sure about Norma making the brass these days , i read nosler in house was making their own brass on more and more cartridges . I find everything nosler over priced but have read that hornady quality is quite low , ? six in hand hand - half dozen in other .
PRESIDENT TRUMP 2024/2028 !!!!!!!!!!
Posted by Bristoe The people wringing their hands over Trump's rhetoric don't know what time it is in America.
|
|
|
|
Joined: Aug 2002
Posts: 19,108
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2002
Posts: 19,108 |
A little off topic, but I have been wondering if .280 AI brass could be used for .280 RCBS by just running it through the forming die? I currently make mine out of .270 brass, and I have not been able to get a piece of .280 AI to measure, or even look at. miles
Look out for number 1, don't step in number 2.
|
|
|
|
Joined: Feb 2007
Posts: 7,436
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2007
Posts: 7,436 |
Without fireforming, Nosler is the way to go. At the present it's all I shoot in my Jarrett. I wouldn't touch Hornady's brass in that caliber....lots of complaints about it if you look around.
You only live once, but...if you do it right, once is enough.
|
|
|
|
Joined: Dec 2012
Posts: 1,982
Campfire Regular
|
Campfire Regular
Joined: Dec 2012
Posts: 1,982 |
^^^^ This. If fireforming then 30-06 Lapua.
|
|
|
|
Joined: Oct 2006
Posts: 24,411 Likes: 5
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2006
Posts: 24,411 Likes: 5 |
Thought 30-06 lapua brass came up short for the 280AI fire-forming ?
PRESIDENT TRUMP 2024/2028 !!!!!!!!!!
Posted by Bristoe The people wringing their hands over Trump's rhetoric don't know what time it is in America.
|
|
|
|
Joined: Sep 2010
Posts: 746
Campfire Regular
|
Campfire Regular
Joined: Sep 2010
Posts: 746 |
Thought 30-06 lapua brass came up short for the 280AI fire-forming ? Not enough to matter. Roll with it.
|
|
|
|
Joined: Jul 2013
Posts: 1,877
Campfire Regular
|
OP
Campfire Regular
Joined: Jul 2013
Posts: 1,877 |
[quote=ol_mike]Thought 30-06 lapua brass came up short for the 280AI fire-forming ? Not enough to matter. Roll with it.[/quot So I would need to run the 06' brass into a full length 280 sizing die, fireform , then good to go, correct?
HMM-161, HMM-364 Semper Fi Brothers
|
|
|
|
Joined: Feb 2007
Posts: 7,436
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2007
Posts: 7,436 |
[quote=ol_mike]Thought 30-06 lapua brass came up short for the 280AI fire-forming ? Not enough to matter. Roll with it.[/quot So I would need to run the 06' brass into a full length 280 sizing die, fireform , then good to go, correct? I think 280 or 280AI would accomplish what you’d want, then fireform. I fireform (when necessary) with a small amount of Bullseye and a quarter square of toilet paper tamped on top of the powder. Point my rifle up and squeeze the trigger. I just do a few at the time...five or so, then come back after the barrel has cooled. It will heat the barrel up in a jiffy if you don’t watch out.
You only live once, but...if you do it right, once is enough.
|
|
|
|
Joined: Oct 2006
Posts: 24,411 Likes: 5
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2006
Posts: 24,411 Likes: 5 |
Does the Lapua brass need neck turned in a custom chamber ?
PRESIDENT TRUMP 2024/2028 !!!!!!!!!!
Posted by Bristoe The people wringing their hands over Trump's rhetoric don't know what time it is in America.
|
|
|
|
Joined: Jul 2013
Posts: 1,877
Campfire Regular
|
OP
Campfire Regular
Joined: Jul 2013
Posts: 1,877 |
I ordered some 280AI Nosler brass for now but still curious about using the Lapua 06' brass . Anybody care to detail the process how they use it? Like said above I have read where it would be too short.
HMM-161, HMM-364 Semper Fi Brothers
|
|
|
|
Joined: Sep 2010
Posts: 746
Campfire Regular
|
Campfire Regular
Joined: Sep 2010
Posts: 746 |
Does the Lapua brass need neck turned in a custom chamber ? Well that would depend on the neck dimension in said custom chamber. In a SAAMI chamber, not required.
Last edited by cast10K; 10/19/19. Reason: clarity
|
|
|
|
Joined: Sep 2016
Posts: 1,313
Campfire Regular
|
Campfire Regular
Joined: Sep 2016
Posts: 1,313 |
Thought 30-06 lapua brass came up short for the 280AI fire-forming ? Correct. Like .270, the .280 is actually a .30-03 based case and is longer than .30-06. You will come up slightly short. Whether or not that matters depends on what you're doing at the neck. Neck turning will likely be required regardless. Just buy the Nosler.
|
|
|
|
Joined: Sep 2010
Posts: 746
Campfire Regular
|
Campfire Regular
Joined: Sep 2010
Posts: 746 |
I meant to say neck turning is NOT required or even desirable with Lapua '06 brass, unless maybe you run into a batch with thick necks.
I simply run mine through a Redding bushing die (Type S - Match, .313" bushing) set up to produce a pretty tight fit in my chamber. Loaded ammo is spot on at .315" which is right at SAAMI spec. It's great because the necks get sized a very small amount. My fireform loads are close to full power and accurate so it's all just practice anyway. The Ackley design is easy on brass and Lapua lasts forever - don't let fireforming scare you away. I've tried Hornady and Nosler and they work obviously, but in my book Lapua '06 is the only way to fly.
|
|
|
|
Joined: Sep 2016
Posts: 1,313
Campfire Regular
|
Campfire Regular
Joined: Sep 2016
Posts: 1,313 |
I meant to say neck turning is NOT required or even desirable with Lapua '06 brass, unless maybe you run into a batch with thick necks. It's not quite that simple. Sizing down from .308 interior to .284 interior will add about 1.5 thousandths to each neck wall thickness. Max allowable SAAMI neck wall thickness on .30-06 is .01585. With expected growth, that becomes .01735. Max allowed thickness for the .280 Ackley is .0155. So there's the potential for the better part of 2 thousandths of interference on each side in a min-spec SAAMI chamber with resized max-size .30-06 brass. Typically Lapua bras mics out at more like .014 (it's not max-sized), which still puts you RIGHT at the limit. So yes, neck turning is likely required or at least very desirable for a min spec SAAMI chamber. It may not be required for YOUR chamber. If your chamber is larger, a larger bushing would also be advised to avoid over-working the brass on resizing.
|
|
|
|
Joined: Oct 2006
Posts: 24,411 Likes: 5
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2006
Posts: 24,411 Likes: 5 |
PRESIDENT TRUMP 2024/2028 !!!!!!!!!!
Posted by Bristoe The people wringing their hands over Trump's rhetoric don't know what time it is in America.
|
|
|
|
374 members (163bc, 12344mag, 1lesfox, 160user, 10ring1, 01Foreman400, 32 invisible),
2,054
guests, and
1,106
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,245
Posts18,486,100
Members73,967
|
Most Online11,491 Jul 7th, 2023
|
|
|
|