I have a Remington 700 Long Action 6.5 PRC topped with a Meopta Meopro 6.5-20x50 HTR (Hunting, Target, Range) side focus riflescope for sale. Here are some of the features: A Rem 700 LA accurized tier 1, timed, tig welded and bolt fluted all by LRI, and the action is bead blasted grey; A Rem varmint contour Hart Barrel that is 24" in length and has a 1 in 8 twist, and is bead blasted grey to match the action, and the crown is an 11 degree target crown; externally adjustable Jewell trigger; Leupold std. RVF mounts w/ std. rings; Grayboe stock that is grey with black webbing, bedded lug and tang, and has a Rem varmint barrel channel; All the gunsmithing was done by Monty Robinson of Hawley, TX including Durakoting the bolt flutes combat black. The chamber was cut with a custom bore rider reamer from PTG that is specifically made for Nosler 140 Gr. Ballistic Tip bullets seated to the neck / shoulder junction to kiss the lands, but 5 thousandths off the lands seems to work best for me. I have only used H 1000 in the rifle, and the results with minimal experimentation are three shots that a dime will cover at 100 yards, and it is equally as accurate w / 140 Gr. Accubonds. I have included pics of the rifle and a pic of my reamer print. Round count is 69. Weight of the rifle is 11.3 lbs. The reason I am selling it is to fund another build. Rifle sells as is, and the price is $3,000.00 OBO shipped to your FFL in the lower 48. Please PM me if interested. Thanks, and have a Merry Christmas!!! P.S. - Would somebody please post the 5 pics I have in the image gallery of this rifle and reamer print and then PM me how you did it? I sure would appreciate it. Thanks