|
Joined: Jun 2010
Posts: 20
New Member
|
OP
New Member
Joined: Jun 2010
Posts: 20 |
Question - is there enough advantage to go through the extra forming step to do a Vartarg or just simply do a 20 Fireball. I know that there is a lot of data out there for the Vartarg I am just not sure of the true advantages. Any advice would be appreciated.
|
|
|
|
Joined: Oct 2006
Posts: 406
Campfire Member
|
Campfire Member
Joined: Oct 2006
Posts: 406 |
Goto 6mmBR, http://www.6mmbr.com/index.html or Saubier, http://www.saubier.com/forum.html then decide just how much hair splitting or nitpicking you want to do. For all intents and purposes it's the same cartridge with a different names.
|
|
|
|
Joined: Nov 2005
Posts: 3,507
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2005
Posts: 3,507 |
I contemplated building a 20 Vartarg for sometime, but could not get past the proprietary dies etc. I ended up building a .221 FB and have never looked back. Lower cost, less hassle, no .20 cal. cleaning stuff to buy, more load data, plenty of .22 cal bullets.
PS, if your using a 700 action, make sure you start with a Fireball donor, and not a .223 donor.
Last edited by Grand; 02/15/11.
|
|
|
|
Joined: Jun 2010
Posts: 20
New Member
|
OP
New Member
Joined: Jun 2010
Posts: 20 |
NFG and Grand thanks, I guess I should have gone into a little more detail. The donor gun is a Rem 722 (222) the tube is most likely going to be a Lilja SS 1-12 24" heavy varmint. Stock - Undecided, and trigger will be replaced. NFG - it is the splitting of the hair that keeps us playing with these things. And Grand - I have the 22's covered too well - looking for a baby sister to the 20 Practical - 17's covered also. But again thank you for your response.
|
|
|
|
Joined: Jul 2005
Posts: 6,784
Campfire Tracker
|
Campfire Tracker
Joined: Jul 2005
Posts: 6,784 |
I contemplated building a 20 Vartarg for sometime, but could not get past the proprietary dies etc. I ended up building a .221 FB and have never looked back. Lower cost, less hassle, no .20 cal. cleaning stuff to buy, more load data, plenty of .22 cal bullets.
PS, if your using a 700 action, make sure you start with a Fireball donor, and not a .223 donor. What is the difference between a Fireball donor and a 223 donor?
Old Corps
Semper Fi
FJB
|
|
|
|
Joined: Apr 2004
Posts: 42,805 Likes: 1
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Apr 2004
Posts: 42,805 Likes: 1 |
I have a take off 204 given to me, by another forum member. ( thanks again TOM!)
I am looking at doing it in a 20 Vartag.. it is a shot out 204 barrel from Pac Nor...
Playing with another 204 barrel, I am just overly impressed as everyone else is with it..
but I do think the 20 Vartag Turbo in logical...even tho the 20 Fireball is very efficient, my logic is I can load the Turbo to Fireball specs or up to Turbo specs....
Guess the cheapest way on dies, is get a collet bushing die in 222 and then just use thicker bushings to neck it to 20 cal... and a 222 die will still seat the bullets just fine..and a 222 body die will knock the shoulder back..
I sort of wish Hornady would also make a 20 HMR rimfire.... I think it would be a better round than a 17 HMR due to having a heavier bullet.... with performance between the 17 HMR ( 2550 fps MV ) and the 22 Mag with the 30 grain plastic tip bullets ( 2200 fps MV)
Speed sells to the masses, but accuracy sells to the purists.. R
"Minus the killings, Washington has one of the lowest crime rates in the Country" Marion Barry, Mayor of Wash DC
“Owning guns is not a right. If it were a right, it would be in the Constitution.” ~Alexandria Ocasio Cortez
|
|
|
|
Joined: Sep 2007
Posts: 1,707
Campfire Regular
|
Campfire Regular
Joined: Sep 2007
Posts: 1,707 |
I contemplated building a 20 Vartarg for sometime, but could not get past the proprietary dies etc. I ended up building a .221 FB and have never looked back. Lower cost, less hassle, no .20 cal. cleaning stuff to buy, more load data, plenty of .22 cal bullets.
PS, if your using a 700 action, make sure you start with a Fireball donor, and not a .223 donor. What is the difference between a Fireball donor and a 223 donor? The feed rails on the Fireball actions are different and the extractor is in a different location.
|
|
|
|
Joined: Dec 2005
Posts: 1,414
Campfire Regular
|
Campfire Regular
Joined: Dec 2005
Posts: 1,414 |
Have you considered "splitting the difference" and choosing the .20 Tactical? Several major manufacturers make the dies. The .223 bolt face is perfect, since it is a glorified necked-down .223, and also the feed rails would not need to be changed.
“You must endeavour to enjoy the pleasure of doing good. That is all that makes life valuable.” Robert E. Lee, in a letter to his invalid wife.
|
|
|
|
Joined: Aug 2008
Posts: 10,443
Campfire Outfitter
|
Campfire Outfitter
Joined: Aug 2008
Posts: 10,443 |
I sort of wish Hornady would also make a 20 HMR rimfire.... I think it would be a better round than a 17 HMR due to having a heavier bullet.... with performance between the 17 HMR ( 2550 fps MV ) and the 22 Mag with the 30 grain plastic tip bullets ( 2200 fps MV)
i believe that it is called the 5mm rimfire... though it is not made by Hornady at this time yet...
30-06 till i die, the greatest round ever! I carry a gun because a cop is too heavy! CEO of a Turdlike People: Turds & Tats Division... (per Ingwe )
|
|
|
|
Joined: Oct 2006
Posts: 406
Campfire Member
|
Campfire Member
Joined: Oct 2006
Posts: 406 |
That 20 Practical is great for us cheapos, not extra dies to buy OR brass...I built one last year...shoots great, plenty of velo, I use Redding bushing dies, the same ones as I use for my 17 Rem and 223 when I'm not using my Lee collet dies...just a smaller bushing....I think I read where someone was using a Lee 223 Collet die for crimping his 20 Practical...gotta check that out, doesn't quite compute.
You could do the same with the 20 FB with Redding bushing dies...just change the bushing and also the primer rod to 204 or 17 Rem.
Absolutely right Elkman, but splitting a hair and then splitting it again gets way to fine for my old eyes. Hahahahaha. I guess it depends on if it is an Elephant hair or a flea hair.
Luck
|
|
|
|
Joined: Oct 2002
Posts: 2,149
Campfire Regular
|
Campfire Regular
Joined: Oct 2002
Posts: 2,149 |
the vartarg is a 20 fireball. Very little difference. You will be impressed at what the vartarg is capable of.
ML
My biggest fear is when I die my wife sells all my gear for what I said I paid for it.
|
|
|
|
Joined: Jun 2010
Posts: 20
New Member
|
OP
New Member
Joined: Jun 2010
Posts: 20 |
NFG - Man if I get into double splitting I think my wife will send me and the guns out the door. I think that I am leaning to just the 20FB, That is what my 7 year old keeps telling me. This is actually his first build. His older brother and sister have been in on a couple each so I am letting him make the call. I have found that they keep it simple and don't spend as much time crunching data, they just pick the one that sounds cool.
|
|
|
|
Joined: Jan 2005
Posts: 22,884
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2005
Posts: 22,884 |
I would think 20 Fireball would be easier to form and play with. Also, the brass would at least be headstamped "Fireball," which might be a good thing for a kid.
|
|
|
|
Joined: Jan 2001
Posts: 58,545 Likes: 6
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2001
Posts: 58,545 Likes: 6 |
Pass the 8" twist 223AI and hold the fluff................
Brad says: "Can't fault Rick for his pity letting you back on the fire... but pity it was and remains. Nothing more, nothing less. A sad little man in a sad little dream."
|
|
|
|
Joined: Nov 2005
Posts: 3,507
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2005
Posts: 3,507 |
Elkman: For the reasons mentioned above a .221FB/20 Vartarg built on a M-700 .223 donor will not reliably eject the brass. Use the correct donor and avoid ejection issues.
|
|
|
|
Joined: Oct 2002
Posts: 96,121
Campfire Oracle
|
Campfire Oracle
Joined: Oct 2002
Posts: 96,121 |
The extractor isn't in a 'different' location on my 17 Fireball. Course I've only run 17 Fireball through it, and it did pickup 222 and 223 fine. Also ran the 17 Fireball bolt through my 222 and 223 and it ejects them fine.
"Dear Lord, save me from Your followers"
|
|
|
|
Joined: Nov 2005
Posts: 3,507
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2005
Posts: 3,507 |
The extractor is in a different location, which causes the brass to be ejected at a different angle. .223 action will eject loaded FB ammo fine, but fired cases release from the extractor prematurely due to ejection angle. .221 FB Left, .223 Right. FB extractor at 8 O'Clock, .223 Extractor at 6 O'Clock
|
|
|
|
Joined: Oct 2002
Posts: 96,121
Campfire Oracle
|
Campfire Oracle
Joined: Oct 2002
Posts: 96,121 |
Same/same on 17 Fireball/223, go figure.
"Dear Lord, save me from Your followers"
|
|
|
|
Joined: Jan 2020
Posts: 11
New Member
|
New Member
Joined: Jan 2020
Posts: 11 |
I joined this forum just to reply to this post. Now, with the .17 WSM, .17 Fireball, and the .17 Hornet out, there are a couple more "in between" cartridges. What I would like to see is something like a .20 WSM and maybe a .20 Hornet (closer to the .17 Hornet design than the .22 Hornet). Also, I think I would take the simplicity of the .20 Practical over the .20 "Tactical" and .20 "Vartarg". Lastly, the .19 Calhoon, .19 Badger, and .19-223 Calhoon should not be overlooked. I think a tiny bit bigger than the .17's and a tiny bit smaller than the .22's is the way to go. Would love to see some pictures of those in here. 17hmr vs 17wsm vs 17 hornet 17 hornet vs 17 rem fireball vs 17 remington The lineup of 17s are (Left to Right): .17 Mach II, .17 HMR, .17 WSM, .17 Hornet, .17 Fireball, .17 Remington. Pictured left to right, 17 HMR, 17 Hornet, 22 Hornet, 223 Remington, and 220 Swift. 17hm2,17hmr,17 hornet, 17 fireball, 17 rem
Last edited by AubMassCoyote; 01/28/20.
|
|
|
|
Joined: Mar 2007
Posts: 4,319
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2007
Posts: 4,319 |
I think there are some guys who have 20 Ackley Hornets over on Saubier. Vartarg is about perfect if you ask me, I love both of mine. If you want to talk small caliber, that is the place. http://www.saubier.com/forum.html
Last edited by jdunham; 01/27/20.
NRA Life Member
~Molɔ̀ːn Labé Skýla~
|
|
|
|
653 members (16penny, 007FJ, 160user, 10ring1, 10gaugeman, 10Glocks, 70 invisible),
2,655
guests, and
1,401
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,213
Posts18,485,479
Members73,966
|
Most Online11,491 Jul 7th, 2023
|
|
|
|