If you are using Nosler data and are entering it into QL to adj. to your gun there is a little piece of QL info that is in plain sight. Lets take a 70gr Varmag in a 243. You pick the cartridge (243 Win) the bullet that has a OAL of 2.680". After you do that look at the box that is marked "case holds 50.8 gr water". That is the vol. of water in their case after the bullet is seated. Now go to QL and enter the case-bullet and the OAL. The generic 243 Win cade is 54gr of water. After you do that it will show in the "useable case capacity" box 51.331gr of H2o. You can now go to the "max case vol at overflow" on QL and adj it up or down till it shows 50.8 in the "useable case capacity" box (hint the number is 53.458gr of water). You can now find the FPS Ba number of their load using the exact size case that they are using. Once you get the Ba number you would then reenter your case "volume to overflow" amount. PS: anyone here looking for the weight of a press or how to take rust off a die GO AWAY

Jim Gibson