|
Joined: Oct 2013
Posts: 18,927 Likes: 1
Campfire Ranger
|
OP
Campfire Ranger
Joined: Oct 2013
Posts: 18,927 Likes: 1 |
First case in a brand new set of dies, new unfired case too. Going back to Redding on my dime, hope they make it right and go above and beyond. 223, body looks heavily tapered and no real body to shoulder angle, kind of a long radius. I guess my question is has anybody dealt w their customer sevice and if so were you satisfied? Not real happy I am paying return shipping as I now have an extra amount of $$ tied up in something that for being a first time customer I am already doubting my purchase. Rant over.
The last time that bear ate a lawyer he had the runs for 33 days!
|
|
|
|
Joined: Feb 2020
Posts: 1,396
Campfire Regular
|
Campfire Regular
Joined: Feb 2020
Posts: 1,396 |
With a standard die set there should be no question other than the min/max SAAMI spec thing. The brass pictured does look funky, but it could be the camera. Did you take before/after measurements rather than just eye-balling? New brass is usually on the small side, what does it do with fired?
I own many sets of Redding dies & have been happy with them, so bought a set of Ackley Imp. dies. These were Group D dies so not real cheap. They had the correct 40* shoulder angle but sized the body almost back to standard 06 taper which pretty much negated the improved thing. I returned them with 3 fired cases. They "polished" the sizer but it didn't change the over-sizing noticeably. The seating die worked fine. Redding's CS said I would need to pay for custom dies if I wanted them to fit my chamber. Unimpressed to say the least, they still sit in a drawer somewhere.
I contacted CH by mail (pre-internet days). One evening the owner called for more details. Sent 3 fired cases to CH & the result was about perfect at a better price, but it took a while. Still using the CH dies. Good folks, good dies.
Sacred cows make good burgers when you know what temperature to cook them at.-Rev. Billy
|
|
|
|
Joined: Feb 2002
Posts: 7,199
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2002
Posts: 7,199 |
C&H make supurb products, excellent customer service!
|
|
|
|
Joined: Oct 2013
Posts: 18,927 Likes: 1
Campfire Ranger
|
OP
Campfire Ranger
Joined: Oct 2013
Posts: 18,927 Likes: 1 |
It is clear to the eye there is no true transition from body to shoulder. Here is a new unfired case next to the new unfired sized case.
The last time that bear ate a lawyer he had the runs for 33 days!
|
|
|
|
Joined: Jun 2007
Posts: 634
Campfire Regular
|
Campfire Regular
Joined: Jun 2007
Posts: 634 |
Let us know how their customer service responds. I have a few sets of their dies and have been pleased.
ttpoz
in silvam ne ligna feras (don't carry logs into the forest)
|
|
|
|
Joined: Oct 2013
Posts: 18,927 Likes: 1
Campfire Ranger
|
OP
Campfire Ranger
Joined: Oct 2013
Posts: 18,927 Likes: 1 |
New thought, going to try one more case.
I am wondering if when I got the case hung it started back down and stretched the case out which would explain the reason for no shoulder.
Got to thinking about this when I noticed the sized case was a good bit longer than original.
The last time that bear ate a lawyer he had the runs for 33 days!
|
|
|
|
Joined: May 2003
Posts: 23,034 Likes: 6
Campfire Ranger
|
Campfire Ranger
Joined: May 2003
Posts: 23,034 Likes: 6 |
10gaugemag: From the pictures you posted it appears you got a set of mis-marked 223 Weatherby Ackley Improved dies. Naw just a feeble attempt at humor there. I have several dozen sets of Redding reloading dies (and various other reloading implements!) and have never had a problem with any of them. I am sure that the stand-up people at Redding will correct what ever in the heck caused that to occur. Good luck. Hold into the wind VarmintGuy
|
|
|
|
Joined: Feb 2019
Posts: 995
Campfire Regular
|
Campfire Regular
Joined: Feb 2019
Posts: 995 |
Looks like a set of 223 H&H dies
|
|
|
|
Joined: Feb 2010
Posts: 15,695 Likes: 1
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2010
Posts: 15,695 Likes: 1 |
My thoughts too. Looks like a mini-300 H&H.
NRA Life,Endowment,Patron or Benefactor since '72.
|
|
|
|
Joined: Apr 2004
Posts: 42,803 Likes: 1
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Apr 2004
Posts: 42,803 Likes: 1 |
My latest project is putting a 17 Fireball barrel on a Savage action...
I looked at a die set from Redding....$90. from Graf or Midway...
For a 2 die set of Lee dies... $31.00...
even at the same price I prefer LEE...
No decision of which set I will order, and wait for them to come in...
"Minus the killings, Washington has one of the lowest crime rates in the Country" Marion Barry, Mayor of Wash DC
“Owning guns is not a right. If it were a right, it would be in the Constitution.” ~Alexandria Ocasio Cortez
|
|
|
|
Joined: Feb 2020
Posts: 1,396
Campfire Regular
|
Campfire Regular
Joined: Feb 2020
Posts: 1,396 |
It is clear to the eye there is no true transition from body to shoulder. Here is a new unfired case next to the new unfired sized case. Much better picture. It doesn't look right. Explain "when I got the case hung". I always chuck new die expander balls in a drill to round the top edge & polish the outside of the ball.
Sacred cows make good burgers when you know what temperature to cook them at.-Rev. Billy
|
|
|
|
Joined: Oct 2013
Posts: 18,927 Likes: 1
Campfire Ranger
|
OP
Campfire Ranger
Joined: Oct 2013
Posts: 18,927 Likes: 1 |
Stuck case. Pulled rim off.
Problem is/was me. The more I thought about the situation the more I realized I stretched case when I was lowering the ram or pulling the stem.
No die issue.
Nothing wrong on Reddings end.
The last time that bear ate a lawyer he had the runs for 33 days!
|
|
|
|
Joined: Oct 2013
Posts: 18,927 Likes: 1
Campfire Ranger
|
OP
Campfire Ranger
Joined: Oct 2013
Posts: 18,927 Likes: 1 |
My latest project is putting a 17 Fireball barrel on a Savage action...
I looked at a die set from Redding....$90. from Graf or Midway...
For a 2 die set of Lee dies... $31.00...
even at the same price I prefer LEE...
No decision of which set I will order, and wait for them to come in... This is my first set of Redding. Have 1 set of RCBS, 1 Hornady and the rest are Lee.
The last time that bear ate a lawyer he had the runs for 33 days!
|
|
|
|
Joined: May 2011
Posts: 56,301 Likes: 9
Campfire Kahuna
|
Campfire Kahuna
Joined: May 2011
Posts: 56,301 Likes: 9 |
_______________________________________________________ An 8 dollar driveway boy living in a T-111 shack
LOL
|
|
|
|
Joined: Oct 2007
Posts: 171
Campfire Member
|
Campfire Member
Joined: Oct 2007
Posts: 171 |
Stuck case. Pulled rim off.
Problem is/was me. The more I thought about the situation the more I realized I stretched case when I was lowering the ram or pulling the stem.
No die issue.
Nothing wrong on Reddings end. Thanks for sharing the resolution with us. I was wondering about that from looking at your picture. I own dies from just about everybody and have more Reddings than the rest hands down maybe 20-30 sets. Everone in the industry has treated me well but Redding has always gone above and beyond my expectations. One thing I have noticed about brand new Redding dies is even when lubed with the extra good stuff they pull hard for maybe30-50 cases and then on their own go glass smooth on the press handle. I've been using them so long I've come to expect it so I go pretty cautious on a new set. Seafire I'm not bashing Lee but they leave something to be desired on product support. I know they are extra busy right now just like everyone in this industry but you can't ignore customers and hope they go away. When you get your 17 Fireball up and running please share your results with us. I've been shooting a Mach 1V for a long time so I know you will enjoy it.
|
|
|
|
Joined: Mar 2006
Posts: 2,801
Campfire Regular
|
Campfire Regular
Joined: Mar 2006
Posts: 2,801 |
Maybe just me and I do use and like Redding dies. On the other hand, I found there CS to be lacking in the one instance that I dealt with them. Have a set of .300 Weatherby FL dies. Sizer works fine but could not even think about seating bullets deep enough. Yes some were newer generation tipped bullets. But a new factory unfired loaded round would not go deep enough into the tie to even touch the seated bullet on the factory round. I spoke with CS and they wanted me to send the dies back on my dime with the 3 sized cases routine. Maybe I am off but my experiences with RCBS have been a lot less of a pain and no issues in getting parts or whatever sent with no questions asked and normally at no cost.
Just my one experience, take it for what it's worth.
|
|
|
|
Joined: Oct 2013
Posts: 18,927 Likes: 1
Campfire Ranger
|
OP
Campfire Ranger
Joined: Oct 2013
Posts: 18,927 Likes: 1 |
Still going to send em back.
Stuck another case last night. It seems that I really need to lay the lube on heavy. These are the first cases I have stuck in years. New unfired cases too.
I am wondering if they just need polished or are a hair on the tight side.
Last edited by 10gaugemag; 02/27/21.
The last time that bear ate a lawyer he had the runs for 33 days!
|
|
|
|
Joined: Feb 2007
Posts: 11,774
Campfire Outfitter
|
Campfire Outfitter
Joined: Feb 2007
Posts: 11,774 |
I’ve had issues with Redding dies, those 22, 20 and 17 cal. I can not get the lube right. Either I get dents in the shoulders or I pull the rim off the case and it’s stuck in the die. I’m buying only RCBS these days. I’ve not had issues with 24 caliber and larger.
NRA Patron
|
|
|
|
Joined: Jan 2021
Posts: 30
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Jan 2021
Posts: 30 |
I have 10 sets of Redding dies from .223 to 340 Wby Mag. No problems.
|
|
|
|
Joined: Feb 2017
Posts: 3,287 Likes: 3
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2017
Posts: 3,287 Likes: 3 |
Redding makes good dies but my favorite are Forster; especially their fl size die. Redding copied Forster/Bonanza’s seater design. I’ve worn out a couple of 223 die sets. The Lee dies are softer than the others. I only got a couple thousand rounds out of those. I've contemplated the carbide Dillon sets, but I’m not doing the volume I once was.
Yours in Liberty,
BL
|
|
|
|
578 members (1badf350, 1lesfox, 1936M71, 10gaugemag, 12344mag, 01Foreman400, 56 invisible),
2,522
guests, and
1,485
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,194
Posts18,485,016
Members73,966
|
Most Online11,491 Jul 7th, 2023
|
|
|
|