Home Forums Hunting & Shooting AR and Tactical Rifles Shades of Burnt Bronze

Have a Ghost Firearms upper in 300 blackout and was wondering if the burnt bronze cerakote would match an Anderson burnt bronze lower. Trying to decide whether to spend the extra $130 on the stripped grid defense lower to make sure the colors match or save a few dollars and go with the Anderson.

Burnt Bronze Cerakote on the AE lower should be just as close as any other, unless, best case would always be, if all parts are done at the same time... IMO.

(If you are talking all Burnt Bronze Cerakote and not trying to match a plastic, or anodizing color.)

Probably close - but no way to be sure until you have both in hand. I've bought a bunch of mis-matched ODG sets even from the same supplier - Aero - they are close, but if they did not come as set, they're usually a shade different.

Burnt Bronze has been more of an issue, as the 'burnt" is subjective to the supplier.

If you are really worried about the final look - coat the lower after you get it - but personally, I'd save the dollars and use the savings for ammo to shoot in it.