|
|
Joined: Mar 2007
Posts: 9,209 Likes: 3
Campfire Outfitter
|
Campfire Outfitter
Joined: Mar 2007
Posts: 9,209 Likes: 3 |
I would not buy something that runs on any kind of primer given the possibility of primer shortages and even regulations. In fact, why not buy a flintlock? Really. Rocks aren't going away anytime soon.
|
|
|
|
|
Joined: Mar 2021
Posts: 2,427 Likes: 3
Campfire Regular
|
Campfire Regular
Joined: Mar 2021
Posts: 2,427 Likes: 3 |
JB weld is [bleep]!, worst epoxy ever!, Get it welded if you can. If you insist on epoxy try one of the devcon products or, if you can find it, something called splash zone! It is an industrial grade epoxy used by the gas and oil industry to repair under water pipe lines. I use it to install stainless tubes in my pontiac cylinder head ports when i cut for max flow! It is exposed to air/fuel under vacuum on one side and hot engine oil on the other! So far no leaks! I also pre heat the parts and the epoxy as as soon as it's mixed to make it thin and flow into tight areas better! This works with devcon also. [use an electric heat gun] Yes welding is cheaper and easier! Good Luck!
|
|
|
|
|
Joined: Jan 2019
Posts: 690
Campfire Regular
|
|
Campfire Regular
Joined: Jan 2019
Posts: 690 |
Why don't I just learn to TIG weld!  That is my underlying problem. I might have to farm it out. Mig it, wire brush it, and then tig it. Now that is just pure retarded. Smh
|
|
|
|
|
Joined: Jun 2006
Posts: 46,102 Likes: 6
Campfire 'Bwana
|
|
Campfire 'Bwana
Joined: Jun 2006
Posts: 46,102 Likes: 6 |
Is that epoxy, or a polymer product??
A wise man is frequently humbled.
|
|
|
|
|
Joined: Jan 2020
Posts: 5,172
Campfire Tracker
|
|
Campfire Tracker
Joined: Jan 2020
Posts: 5,172 |
Why don't I just learn to TIG weld! That is my underlying problem. I might have to farm it out. Mig it, wire brush it, and then tig it. Now that is just pure retarded. Smh Works excellent till you get the hang of fingering the tig rod. As a matter of fact there's a name for it, fuse welding.
Life is good live it while you can.
|
|
|
|
|
Joined: Sep 2017
Posts: 2,795
Campfire Regular
|
|
Campfire Regular
Joined: Sep 2017
Posts: 2,795 |
Just get aluminum solder. It is used in industry to solder on A/C adapters by the millions. Aluminum Solder
|
|
|
|
|
Joined: Apr 2005
Posts: 30,939 Likes: 1
Campfire 'Bwana
|
|
Campfire 'Bwana
Joined: Apr 2005
Posts: 30,939 Likes: 1 |
JB weld is [bleep]!, worst epoxy ever!, Get it welded if you can. If you insist on epoxy try one of the devcon products or, if you can find it, something called splash zone! It is an industrial grade epoxy used by the gas and oil industry to repair under water pipe lines. I use it to install stainless tubes in my pontiac cylinder head ports when i cut for max flow! It is exposed to air/fuel under vacuum on one side and hot engine oil on the other! So far no leaks! I also pre heat the parts and the epoxy as as soon as it's mixed to make it thin and flow into tight areas better! This works with devcon also. [use an electric heat gun] Yes welding is cheaper and easier! Good Luck! I've used JB weld to repair holes in feul tanks with excellent results. I repair a rather large hole in the bottom of my diesel tank on my tractor 5 or 6 years ago with no problems since
I got banned on another web site for a debate that happened on this site. That's a first
|
|
|
|
|
Joined: Jan 2006
Posts: 69,397 Likes: 4
Campfire Kahuna
|
|
Campfire Kahuna
Joined: Jan 2006
Posts: 69,397 Likes: 4 |
Does that Alumaloy work as well as the ads say it does? I could find some uses for it if it does.
“In a time of deceit telling the truth is a revolutionary act.”
― George Orwell
It's not over when you lose. It's over when you quit.
|
|
|
|
|
Joined: Jun 2004
Posts: 7,180 Likes: 1
Campfire Tracker
|
|
Campfire Tracker
Joined: Jun 2004
Posts: 7,180 Likes: 1 |
Acraglas. Liquid, not the gel. GD
|
|
|
|
|
527 members (10Glocks, 219 Wasp, 21, 1minute, 260madman, 1OntarioJim, 58 invisible),
2,432
guests, and
1,208
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums81
Topics1,192,431
Posts18,489,256
Members73,970
| |
Most Online11,491
Jul 7th, 2023
|
|
|
|
