|
|
|
|
Joined: Jan 2001
Posts: 14,338
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2001
Posts: 14,338 |
Wrap cord around the pully's, mark, then lay out flat and measure length. You can get any type and any length custom made if needed here: LinkPhil
|
|
|
|
|
Joined: Jan 2006
Posts: 69,488 Likes: 20
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2006
Posts: 69,488 Likes: 20 |
I just got back from the local Yazoo guy.
He was able to pull out a Bunton parts list and match it up, but none of the stuff is readily available. All the belts, pulleys, etc are discontinued.
He told me I'm going to have to either chase down new old stock or match stuff by size. I don't know if its worth the effort. Its not my primary mower, I just bought it to see if I could restore it.
Basically at this point, I have the motor in good shape, but the belts , pulleys and spindles are all bad/rotten.
The guy there was like "don't put another dime in this thing" Go any good bearing supply house. They can match almost any bearing, belt, etc. I've taken any number of old bearings and belts to Kaman Bearing and they've found a match every time.
“In a time of deceit telling the truth is a revolutionary act.”
― George Orwell
It's not over when you lose. It's over when you quit.
|
|
|
|
|
Joined: Nov 2006
Posts: 10,825 Likes: 1
Campfire Outfitter
|
|
Campfire Outfitter
Joined: Nov 2006
Posts: 10,825 Likes: 1 |
I just got back from the local Yazoo guy.
He was able to pull out a Bunton parts list and match it up, but none of the stuff is readily available. All the belts, pulleys, etc are discontinued.
He told me I'm going to have to either chase down new old stock or match stuff by size. I don't know if its worth the effort. Its not my primary mower, I just bought it to see if I could restore it.
Basically at this point, I have the motor in good shape, but the belts , pulleys and spindles are all bad/rotten.
The guy there was like "don't put another dime in this thing" Go any good bearing supply house. They can match almost any bearing, belt, etc. I've taken any number of old bearings and belts to Kaman Bearing and they've found a match every time. Karan is a good outfit for bearings. If you don’t have one nearby, you can find about any bearing you need by dimensions and type on the MSC site. Just a BTW also you can get about any spring you want from them if you can determine dimensions needed. I have done that often for gun springs not carried by Wolfe. Wolfe is handier in that all you need to know is what spring for what gun, but MSC ships much faster and way cheaper.
Mathew 22: 37-39
|
|
|
|
|
515 members (222Sako, 219 Wasp, 1OntarioJim, 163bc, 12344mag, 22250rem, 43 invisible),
2,422
guests, and
1,310
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums81
Topics1,193,917
Posts18,518,767
Members74,020
| |
Most Online11,491
Jul 7th, 2023
|
|
|
|
|
|
