Home Forums Hunting & Shooting Handguns 327 Federal Magnum Bullets

Hello All,

I have found a 115 grain 32 cal bullet to replace the one Speer quit making. Hawk makes a .312" bullet for the 32-20 so I called, and in short order, 3 months (that is short order these days) I had them. Loaded and tried them out in my Blackhawk and all is well.

I have not looked today but all 32 cal jacked bullets have been "NOT IN STOCK" for some time and 115s are not to be found in a jacketed bullet except from Hawk.

Just thought I would give them a nod as they are still producing bullets for a 32.

8mmwapiti

Any reason you prefer jacketed over cast? There are some excellent cast bullet designs for the 32s and cast bullet makers are often quicker to deliver than boutique jacketed bullet makers. Or you could always dive in head first and buy a mold and all the associated tools to make your own cast bullets.

3 different choices of in stock coated cast here if you'd like to give it a try.

http://www.acmebullet.com/32-CAL-Reloading-Bullets

I am loving my 120 gr bullet from an Accurate mold # 31-120S. I also make a 95 gr wadcutter for lighter loads.

But the 120 is the cat's meow. It has a big flat nose, and is designed specifically to fit in the short cylinder of the Ruger single seven. I powder coat them. and load over 12.3 gr H110.

The load will sting the hand a bit when fired from the LCR. But is quite controllable from the SP101 and the Single Seven.