|
Joined: Aug 2006
Posts: 2,012
Campfire Regular
|
OP
Campfire Regular
Joined: Aug 2006
Posts: 2,012 |
I have a stock with a high gloss finish. Is it possible to nock off the gloss? How?
When the tailgate drops the BS stops.
|
|
|
|
Joined: Feb 2001
Posts: 50,646 Likes: 2
Campfire Kahuna
|
Campfire Kahuna
Joined: Feb 2001
Posts: 50,646 Likes: 2 |
What is the stock on? It makes a difference which finish you are knocking down.
You can always start with rottenstone and oil on a felt pad. Do not rub small areas and try to blend at the end. Instead, use long overlapping strokes.
If rottenstone is not cutting you can wetsand with very fine sandpaper. P1200 is about right... finer and it polishes rather than mattes. Talking about thick finishes with wetsanding... Browning is the first to come to mind.
Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
|
|
|
|
Joined: Feb 2007
Posts: 11,800 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: Feb 2007
Posts: 11,800 Likes: 1 |
I hate the Browning and Remington high gloss finishes. I’ve had some guns re finished professionally as I’m not skilled enough and/or am to lazy.
NRA Patron
|
|
|
|
Joined: Feb 2007
Posts: 7,448 Likes: 3
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2007
Posts: 7,448 Likes: 3 |
Ultra fine grade scotchbrite pads. Take your time.
You only live once, but...if you do it right, once is enough.
|
|
|
|
Joined: Feb 2001
Posts: 50,646 Likes: 2
Campfire Kahuna
|
Campfire Kahuna
Joined: Feb 2001
Posts: 50,646 Likes: 2 |
Ultra fine grade scotchbrite pads. Take your time. While a reasonable option, IMO&E... they tend to lead to frequent scratches... Anything done dry does.
Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
|
|
|
|
Joined: Sep 2009
Posts: 1,290
Campfire Regular
|
Campfire Regular
Joined: Sep 2009
Posts: 1,290 |
|
|
|
|
Joined: Nov 2002
Posts: 33,770 Likes: 7
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2002
Posts: 33,770 Likes: 7 |
Rottenstone worked well on an older M700 ADL of mine.
Conduct is the best proof of character.
|
|
|
|
Joined: May 2021
Posts: 3,511
Campfire Tracker
|
Campfire Tracker
Joined: May 2021
Posts: 3,511 |
00 if your careful 000 if your not....you'll have tennis elbo before you knock it down with 0000.
I've used 00 on a couple of Browning high gloss stocks over the years...takes a light careful hand. .
|
|
|
|
Joined: Aug 2002
Posts: 14,473
Campfire Outfitter
|
Campfire Outfitter
Joined: Aug 2002
Posts: 14,473 |
|
|
|
|
Joined: Jul 2016
Posts: 615
Campfire Regular
|
Campfire Regular
Joined: Jul 2016
Posts: 615 |
Brownells rubbing compounds are what I use. The red is what gives me the best matte finish. Easier to use than rotten stone and repeatable results. I normally use it on Tru-Oil finishes but it will eventually knock down the gloss on the epoxy finishes.
|
|
|
|
Joined: May 2021
Posts: 3,511
Campfire Tracker
|
Campfire Tracker
Joined: May 2021
Posts: 3,511 |
That will work.on a true oil finish... .it wet even scuff one of the factory high gloss epoxy finishes.
|
|
|
|
Joined: Feb 2001
Posts: 50,646 Likes: 2
Campfire Kahuna
|
Campfire Kahuna
Joined: Feb 2001
Posts: 50,646 Likes: 2 |
Steel wool will leave particles of steel in the finish which will soon rust and create freckles in the finish. Better things have been available for many years.
Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
|
|
|
|
Joined: Feb 2001
Posts: 50,646 Likes: 2
Campfire Kahuna
|
Campfire Kahuna
Joined: Feb 2001
Posts: 50,646 Likes: 2 |
That will work.on a true oil finish... .it wet even scuff one of the factory high gloss epoxy finishes.
Which factory uses epoxy?
Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
|
|
|
|
Joined: Jan 2003
Posts: 3,460 Likes: 13
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2003
Posts: 3,460 Likes: 13 |
That will work.on a true oil finish... .it wet even scuff one of the factory high gloss epoxy finishes.
Which factory uses epoxy? Bingo! -Al
Forbidden Zoner
|
|
|
|
Joined: May 2021
Posts: 3,511
Campfire Tracker
|
Campfire Tracker
Joined: May 2021
Posts: 3,511 |
I said epoxy....not sure what they use but most strippers wont hardly dull it.
|
|
|
|
Joined: Dec 2004
Posts: 17,247 Likes: 1
Campfire Ranger
|
Campfire Ranger
Joined: Dec 2004
Posts: 17,247 Likes: 1 |
I used a Mr Clean magic eraser on a high gloss laminate to good effect.
Now with even more aplomb
|
|
|
|
Joined: Feb 2001
Posts: 50,646 Likes: 2
Campfire Kahuna
|
Campfire Kahuna
Joined: Feb 2001
Posts: 50,646 Likes: 2 |
I said epoxy....not sure what they use but most strippers wont hardly dull it. Dunning-Kruger lives!
Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
|
|
|
|
Joined: May 2021
Posts: 25
Campfire Greenhorn
|
Campfire Greenhorn
Joined: May 2021
Posts: 25 |
Brownells rubbing compounds is what i have been using so far, it actually just takes a careful hand. .
|
|
|
|
134 members (300_savage, 2500HD, 24HourCampFireGuy50, 673, 338reddog, 204guy, 17 invisible),
1,673
guests, and
880
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,193,449
Posts18,507,912
Members74,002
|
Most Online11,491 Jul 7th, 2023
|
|
|
|