|
Joined: Feb 2007
Posts: 7,448 Likes: 3
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2007
Posts: 7,448 Likes: 3 |
90% of the blades I send out are between 3” and 3 1/2” cutting edge.
You only live once, but...if you do it right, once is enough.
|
|
|
|
Joined: May 2016
Posts: 3,746
Campfire Tracker
|
Campfire Tracker
Joined: May 2016
Posts: 3,746 |
I killed my first cow elk in '95 and I used a 7 inch Cold Steel Recon Tanto (the old Carbon V steel) to field dress, rip up the brisket and all, and it would still shave hair afterward! ha It was great for that job. I didn't split the pelvis, reamed the rectum.
|
|
|
|
Joined: Dec 2019
Posts: 193
Campfire Member
|
Campfire Member
Joined: Dec 2019
Posts: 193 |
I used a 5" blade for years, a buck 105. Have it damn near worn out so last year i picked up a 113 ranger skinner which is a little over 3". The shorter blade is definetly a bit more user friendly and controllable for better cuts, I've cut my hand a few times over the years with that longer knife.
|
|
|
|
Joined: Feb 2009
Posts: 1,806 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Feb 2009
Posts: 1,806 Likes: 1 |
After I shot my leopard a few years ago in Mozambique, I went back to where the staff were skinning it, took out my 2" pocket knife, and asked them if they wanted me to help. They all got a good laugh at my small knife.
Actually, for many years I dressed and skinned all of my deer, elk, sheep, moose, etc with a 6 or 7" fixed blade hunting knife. Now I use a 5" Swing blade and a 4 or 5" folding Razor bladeknife.
SAVE 200 ELK, KILL A WOLF
NRA Endowment Life Member
|
|
|
|
Joined: Aug 2007
Posts: 1,638
Campfire Regular
|
Campfire Regular
Joined: Aug 2007
Posts: 1,638 |
I have no need for a blade that is any longer than then the width of palm of my hand. Anything longer just gets in the way when butchering/ dressing an animal.
|
|
|
|
Joined: Oct 2002
Posts: 13,490 Likes: 3
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2002
Posts: 13,490 Likes: 3 |
I have big hands and like a longer blade. A Buck 119, the Schrade 153UH. 5 to 6 inch blades work for me. Sharp is the most important aspect. I wear one of these all the time. Just about wore out the second one. If I am fishing this knife is easier to clean fish with. For a pocket knife I like this style, have worn out several of them. Wish they still made them with the hole.
Dog I rescued in January
|
|
|
|
Joined: Jun 2007
Posts: 29,786
Campfire Ranger
|
Campfire Ranger
Joined: Jun 2007
Posts: 29,786 |
The Puma folder is what I use for field dressing since 1992, the Marttiini belt knife also goes with me for field dressing moose as well. The main blade on the Puma is 3 1/4", the Marttiini is 5" Cat Ooo...I would not like to be ponying up the coin for a mint one of that model Puma now, it would hurt.
These are my opinions, feel free to disagree.
|
|
|
|
Joined: Dec 2003
Posts: 3,715
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2003
Posts: 3,715 |
The Puma folder is what I use for field dressing since 1992, the Marttiini belt knife also goes with me for field dressing moose as well. The main blade on the Puma is 3 1/4", the Marttiini is 5" Cat Ooo...I would not like to be ponying up the coin for a mint one of that model Puma now, it would hurt. No kidding, I was stunned when I found out what those things cost! My son eas gifted a NIB identical one by our good friend Hornhead, but he has yet to use it, he is all about Grohnann knives . Cat
Last edited by catnthehat; 12/04/21.
scopes are cool, but slings 'n' irons RULE!
|
|
|
|
Joined: May 2021
Posts: 3,511
Campfire Tracker
|
Campfire Tracker
Joined: May 2021
Posts: 3,511 |
I killed my first cow elk in '95 and I used a 7 inch Cold Steel Recon Tanto (the old Carbon V steel) to field dress, rip up the brisket and all, and it would still shave hair afterward! ha It was great for that job. I didn't split the pelvis, reamed the rectum. I dont know what goofy Outdoor writer started the idea that a short knife was better....I fell for it for years I prefer a 6 to 7" blade for field dressing for that very reason reaming the rectum. Then followed by an unzipping with the Wyoming knife. Then up the brisket with the big knife...reach in and cut the wind pipe loose and never let go of the wind pipe until you stand up. With a few more cuts on the diaphragm I can stand up with the deers entire entrails in my hand in short order. 4" blades are great for trimming your nails, whittling and working the hide off and light trimming..... See how many butchers you can find that use a snub nose knife.
|
|
|
|
Joined: Apr 2011
Posts: 152,000 Likes: 24
Campfire Savant
|
Campfire Savant
Joined: Apr 2011
Posts: 152,000 Likes: 24 |
Buck 118 is about 5”, four would be better.
|
|
|
|
Joined: Aug 2017
Posts: 2,476
Campfire Regular
|
Campfire Regular
Joined: Aug 2017
Posts: 2,476 |
This is my field knife. 5” semi-flex Forschner. Have used it for years and lots and lots of critters. Down to about 4.5” now. I use a 6” curved when breaking critters at home in my shop but I like the straight thin blade for bung reaming. I don’t split pelvises. This style is super nice when going gutless and boning out lions and quarters. I used to have a slightly longer and thicker steel for it but as of last spring that is on a mountain in Idaho next to a bear carcass.
|
|
|
|
Joined: Dec 2009
Posts: 1,213
Campfire Regular
|
Campfire Regular
Joined: Dec 2009
Posts: 1,213 |
This is my field knife. 5” semi-flex Forschner. Have used it for years and lots and lots of critters. Down to about 4.5” now. I use a 6” curved when breaking critters at home in my shop but I like the straight thin blade for bung reaming. I don’t split pelvises. This style is super nice when going gutless and boning out lions and quarters. I used to have a slightly longer and thicker steel for it but as of last spring that is on a mountain in Idaho next to a bear carcass. Hard to argue against that rig.
|
|
|
|
Joined: Oct 2000
Posts: 30,291 Likes: 2
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Oct 2000
Posts: 30,291 Likes: 2 |
2.75 - 4.00”… but it depends on the knife build. My favorite fixed blade is the Grohmann Canadian Belt Knife. Its blade feels “smaller” than its 4” would suggest. Probably because it’s design encourages one to choke up on it. Other knives (like an Ingram) I prefer a 3.25” blade.
“Perfection is Achieved Not When There Is Nothing More to Add, But When There Is Nothing Left to Take Away” Antoine de Saint-Exupery
|
|
|
|
Joined: Dec 2016
Posts: 3,769 Likes: 1
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2016
Posts: 3,769 Likes: 1 |
. . For a pocket knife I like this style, have worn out several of them. Wish they still made them with the hole. That's a single clip blade ?
|
|
|
|
Joined: Sep 2017
Posts: 4,379
Campfire Tracker
|
Campfire Tracker
Joined: Sep 2017
Posts: 4,379 |
Our answers are all over for the blade lengths, but what we haven’t specified is if the knife is being used for field dressing, boning or final portion preparation. As written earlier I do like something in the 3” or a little over range with a drop point for field dressing, but a longer, thinner knife for under the tail and final clean up back at the meat pole. An even longer one works well for final portion processing. When I worked at the packing house I ordered one of the Dexter knives that we used to cut tenderloins. That knife has a 12 1/4” blade because restaurant grade good meat should be cut with one cut all the way through so there isn’t a bunch of saw marks through the meat.
My other auto is a .45
The bitterness of poor quality is remembered long after the sweetness of low price has faded from memory
|
|
|
|
Joined: May 2016
Posts: 3,746
Campfire Tracker
|
Campfire Tracker
Joined: May 2016
Posts: 3,746 |
I have big hands and like a longer blade. A Buck 119, the Schrade 153UH. 5 to 6 inch blades work for me. Sharp is the most important aspect. I wear one of these all the time. Just about wore out the second one. If I am fishing this knife is easier to clean fish with. For a pocket knife I like this style, have worn out several of them. Wish they still made them with the hole. Rick, I can tell you are from Texas! I have/or had those same knives!
|
|
|
|
Joined: Feb 2001
Posts: 5,220
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2001
Posts: 5,220 |
I use several knives and select one specific to the hunt/task. When gutting and not cutting open the chest I prefer a 2 3/4 bladed fixed, easy to clean and less chance of cutting myself and extremely light to carry. If cutting open the chest I use a 5" fixed blade. Here in SD where we drive around and shoot deer one of my several 3" folders are used for gutting.
Elk hunting was always a walking and carrying a pack and a #7 Ingram with a 3 1/2 blade was used on the majority of my hunts.
Once home I use a Tim Olt bull nose for skinning, An F. Dick 5" flexible boner is used for the vast majority of my butcher work.
The difference between genius and stupidity is that genius has its limits. Albert Einstein
|
|
|
|
Joined: Jun 2020
Posts: 10,205 Likes: 6
Campfire Outfitter
|
Campfire Outfitter
Joined: Jun 2020
Posts: 10,205 Likes: 6 |
I have several B&T knives that I like to carry while bird hunting and a handful of Marbles, Winston, Bark River, Rapid River big game knives but a Cold Steel USA made Carbon V Master Hunter is my go to.
For butchering I use an Ontario skinner and Victorinox boning knife.
|
|
|
|
Joined: Sep 2010
Posts: 4,293
Campfire Tracker
|
Campfire Tracker
Joined: Sep 2010
Posts: 4,293 |
I have several B&T knives that I like to carry while bird hunting and a handful of Marbles, Winston, Bark River, Rapid River big game knives but a Cold Steel USA made Carbon V Master Hunter is my go to.
For butchering I use an Ontario skinner and Victorinox boning knife. How do you like the Cold steel blade? I'm making a few Christmas gifts out of their steel. W. Bill
I'd rather die in a BAD gunfight than a GOOD nursing home.
|
|
|
|
Joined: Jun 2020
Posts: 10,205 Likes: 6
Campfire Outfitter
|
Campfire Outfitter
Joined: Jun 2020
Posts: 10,205 Likes: 6 |
I have several B&T knives that I like to carry while bird hunting and a handful of Marbles, Winston, Bark River, Rapid River big game knives but a Cold Steel USA made Carbon V Master Hunter is my go to.
For butchering I use an Ontario skinner and Victorinox boning knife. How do you like the Cold steel blade? I'm making a few Christmas gifts out of their steel. W. Bill It’s changed formulas over the years but the Carbon V steel that I have is excellent. It holds a good edge and touches up easily. The blade profile on the Master Hunter has a lot of spine and belly but with a fine enough point that it’s a useful all around knife minus delicate work on small animals. Great big game and camp knife with enough heft and spine to break down a critter into small pieces pretty easily.
|
|
|
|
171 members (2500HD, 338reddog, 204guy, 1lessdog, 2ndwind, 280shooter, 25 invisible),
1,956
guests, and
865
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,193,446
Posts18,507,893
Members74,002
|
Most Online11,491 Jul 7th, 2023
|
|
|
|