|
|
Joined: Sep 2010
Posts: 2,132
Campfire Regular
|
OP
Campfire Regular
Joined: Sep 2010
Posts: 2,132 |
How difficult would it be to rechamber a commonly found .223 Contender Carbine barrel from .223 to (the rimmed) 219 Donaldson-Wasp?
Aside from a 30-30-sized extractor, would anything else be needed?
Could it be done by hand, or would it require a lathe?
Last edited by J23; 12/05/21.
"Ignorance is acceptable, because you can remedy it with knowledge and research. Stupidity is when you guard your ignorance." Ted Nugent
"Idolizing a politician is like believing the stripper really likes you."
|
|
|
|
Joined: Sep 2010
Posts: 7,472 Likes: 5
Campfire Tracker
|
Campfire Tracker
Joined: Sep 2010
Posts: 7,472 Likes: 5 |
You want to have the rim counterbore cut on a lathe. I had a rim counterbore cut on a 300 BLK single shot barrel by a "hobby gunsmith" that was terribly out of round and not the same depth. He used a drill press and a "special" reamer. Never again!
Hand reaming the chamber may be possible but only if the reamer pilot reaches into the bore and you have a way of ensuring there's no tail runout. The only hand rechambering I've done were 357 Mag to 357 Max and 44 Mag to 445 Supermag. In both of them the reamer was fully supported by the original chamber, the pilot reached into the bore, and the rims were already cut.
Medics bury their mistakes..
|
|
|
|
Joined: Feb 2016
Posts: 17,821
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2016
Posts: 17,821 |
The Wasp is cool
Guess theres a Long and a Short version.
|
|
|
|
Joined: Nov 2010
Posts: 37,152 Likes: 2
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,152 Likes: 2 |
Taking a Hornet to K-Hornet not quite the same. But pretty easy to do.
DF
|
|
|
|
Joined: Oct 2002
Posts: 13,440 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2002
Posts: 13,440 Likes: 1 |
How difficult would it be to rechamber a commonly found .223 Contender Carbine barrel from .223 to (the rimmed) 219 Donaldson-Wasp?
Aside from a 30-30-sized extractor, would anything else be needed?
Could it be done by hand, or would it require a lathe? Eabco sells barrels already chambered for the Wasp, good shooters and less trouble to get.
Dog I rescued in January
|
|
|
|
580 members (06hunter59, 10Glocks, 10gaugemag, 1234, 01Foreman400, 10ring1, 62 invisible),
2,448
guests, and
1,247
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,590
Posts18,492,128
Members73,972
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|