|
Joined: Jul 2005
Posts: 23,499
Campfire Ranger
|
Campfire Ranger
Joined: Jul 2005
Posts: 23,499 |
Built this today on the cheap.. I did use a ballistic advantage barrel, hiperfire enhanced trigger. That did add to the cost of the build. It’s a 5.56
Last edited by 79S; 01/21/22.
Then STFU. The rest of your statement is superflous bullshit with no real bearing on this discussion other than to massage your own ego. Suckin' on my titties like you wanted me.
|
|
|
|
Joined: Aug 2010
Posts: 48,036
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,036 |
Cut your losses and buy a BCA barrel and screw it on. Dayom...................that right there is some funny schitt. Laughin' here. MM Made me laugh pretty good too..
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: May 2020
Posts: 596
Campfire Regular
|
Campfire Regular
Joined: May 2020
Posts: 596 |
Rather been upgrading pieces: Tubb flat springs and Eclipse triggers for the Stoners, Trijicon HDXRs for the G40, red dot mount to move a deltapoint pro to a grendel pistol etc.
|
|
|
|
Joined: Jan 2018
Posts: 373
Campfire Member
|
Campfire Member
Joined: Jan 2018
Posts: 373 |
Recently put together a 223 wylde upper with a ballistics advantage barrel, odin works handguard, rock river lower with Cmc trigger, and magnum fixed carbine stock. Function tested it but have not scoped it to shoot yet.
|
|
|
|
Joined: Sep 2009
Posts: 12,097
Campfire Outfitter
|
Campfire Outfitter
Joined: Sep 2009
Posts: 12,097 |
The 12.5 seems the best short barrel answer. I am going to build some on mid gas as dedicated suppressor guns. Can pin and weld the 4 inch mono core to make a 1 stamp gun.
John Burns
I have all the sources. They can't stop the signal.
|
|
|
|
Joined: Aug 2010
Posts: 48,036
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,036 |
Built this today on the cheap.. I did use a ballistic advantage barrel, hiperfire enhanced trigger. That did add to the cost of the build. It’s a 5.56 I like that one.
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Jul 2005
Posts: 23,499
Campfire Ranger
|
Campfire Ranger
Joined: Jul 2005
Posts: 23,499 |
Built this today on the cheap.. I did use a ballistic advantage barrel, hiperfire enhanced trigger. That did add to the cost of the build. It’s a 5.56 I like that one. Went and shot it today. It shoots 69gr SMK with 22.2gr of Accurate 2200. Pretty good 10 shot group .990 shot my 600yd load pretty good 75gr eld-m with 2460. I did measure that group. I put a 10x swfa on it to ensure I shot it good, me eyes suck and peep sights are not friend anymore.. I pulled it off, will get a 1-4.5 and put it on their for a service rifle setup.
Last edited by 79S; 01/27/22.
Then STFU. The rest of your statement is superflous bullshit with no real bearing on this discussion other than to massage your own ego. Suckin' on my titties like you wanted me.
|
|
|
|
Joined: Sep 2006
Posts: 23,631
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2006
Posts: 23,631 |
Nice, & plenty good....................I'd say that you won that round of BA roulette. MM
|
|
|
|
Joined: Jul 2005
Posts: 23,499
Campfire Ranger
|
Campfire Ranger
Joined: Jul 2005
Posts: 23,499 |
Nice, & plenty good....................I'd say that you won that round of BA roulette. MM I hear you on that, this is my second BA barrel and the other shoots just as equally well with 77smk.
Last edited by 79S; 01/27/22.
Then STFU. The rest of your statement is superflous bullshit with no real bearing on this discussion other than to massage your own ego. Suckin' on my titties like you wanted me.
|
|
|
|
Joined: May 2007
Posts: 14,653
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: May 2007
Posts: 14,653 |
The 12.5 seems the best short barrel answer. I am going to build some on mid gas as dedicated suppressor guns. Can pin and weld the 4 inch mono core to make a 1 stamp gun. Those will be popular. We've got several 12.5s in our office. They're short enough to be handy, but an 11.5" rail is long enough to be useful and to handle a PEQ and light. I'm still waiting to get one.
your flippant remarks which you so adeptly sling
|
|
|
|
Joined: Sep 2009
Posts: 46,245
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Sep 2009
Posts: 46,245 |
Anything in particular you’re wanting?
Yes, ran back across a Delta Point Pro sight that's been collecting dust on a safe top for over a year, ordered another 5.56 PSA 7 twist mid-length, it'll be here today, i dont shoot these rifles like you guys, but the little PSA's have served me well and have never offered any sort of hiccup, plus, another AR around with 31 62gr bearclaws or 64gr nosler bondeds on board is alright by me. Both bullets run 2750 ish over 25gr Power Pro Varmint powder in LC match brass, I'll get it zeroed at 36 yards over the weekend.
Trump Won!
|
|
|
|
539 members (1beaver_shooter, 1936M71, 17CalFan, 1badf350, 160user, 22250rem, 43 invisible),
2,573
guests, and
1,365
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,709
Posts18,475,378
Members73,941
|
Most Online11,491 Jul 7th, 2023
|
|
|
|