|
Joined: Jul 2009
Posts: 908
Campfire Regular
|
OP
Campfire Regular
Joined: Jul 2009
Posts: 908 |
For those that reload cast bullets in 44 magnum, do you crimp with the ring in the seater die at the same time you seat the bullet, or as a separate step? And if doing as a separate step, do you use the seater die with the seating plug backed off or use a dedicated crimping die?
Thanks
If you can't be a good example, may you at least serve as a dreadful warning
|
|
|
|
Joined: Feb 2020
Posts: 1,403
Campfire Regular
|
Campfire Regular
Joined: Feb 2020
Posts: 1,403 |
Separate step. Same die stem backed off.
Sacred cows make good burgers when you know what temperature to cook them at.-Rev. Billy
|
|
|
|
Joined: Jan 2001
Posts: 4,938 Likes: 3
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2001
Posts: 4,938 Likes: 3 |
Separate step. Same die stem backed off. This. Okie John
If Montana had a standing army, a 270 Win with Federal Blue Box 130's would be the standard issue.
|
|
|
|
Joined: Jul 2004
Posts: 6,711 Likes: 8
Campfire Tracker
|
Campfire Tracker
Joined: Jul 2004
Posts: 6,711 Likes: 8 |
Separate step. Same die stem backed off. This. Okie John Did it that way for years, but have a separate crimp die now. Both work.
'Four legs good, two legs baaaad." ---------------------------------------------- "Jimmy, some of it's magic, Some of it's tragic, But I had a good life all the way." (Jimmy Buffett)
SotG
|
|
|
|
Joined: Feb 2004
Posts: 2,384 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Feb 2004
Posts: 2,384 Likes: 1 |
For those that reload cast bullets in 44 magnum, do you crimp with the ring in the seater die at the same time you seat the bullet, or as a separate step? And if doing as a separate step, do you use the seater die with the seating plug backed off or use a dedicated crimping die?
Thanks Back in the dark ages I used the RCBS seater die. Then Lee came out with the Factory Crimp Die, and I switched to that. Later Lee came up with the collet die and I've been using that.
|
|
|
|
Joined: Apr 2010
Posts: 8,245 Likes: 20
Campfire Outfitter
|
Campfire Outfitter
Joined: Apr 2010
Posts: 8,245 Likes: 20 |
I seat and crimp in the same step. I keep my Hornady die set for 44 Mag cases and an RCBS setup for Specials. It probably helps that I use one bullet for 95 percent of my 44 loads and once I get the die set I lock it down and don’t monkey with it.
|
|
|
|
Joined: Jan 2001
Posts: 31,039 Likes: 30
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jan 2001
Posts: 31,039 Likes: 30 |
Lee factory crimp die.....
Just as good as the Lee collet neck die for rifle cases
T R U M P W O N !
U L T R A M A G A !
|
|
|
|
Joined: Feb 2010
Posts: 17,904 Likes: 7
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2010
Posts: 17,904 Likes: 7 |
I have done it both ways, currently seat and crimp in the same operation. I've been shooting the "Skeeter Skelton load" for the past 25 + years, a 200gr. RNFP bullet over 7.5gr. of Unique.
|
|
|
|
Joined: May 2014
Posts: 10,543 Likes: 17
Campfire Outfitter
|
Campfire Outfitter
Joined: May 2014
Posts: 10,543 Likes: 17 |
I still do it either way.
I prefer classic. Semper Fi I used to run with the hare. Now I'm envious of the tortoise and I do my own stunts but rarely intentionally
|
|
|
|
Joined: Jun 2004
Posts: 44,940 Likes: 24
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2004
Posts: 44,940 Likes: 24 |
I have done it both ways, currently seat and crimp in the same operation. I've been shooting the "Skeeter Skelton load" for the past 25 + years, a 200gr. RNFP bullet over 7.5gr. of Unique. I believe Skeeter's load was 7.5 gr. Unique under a 250 gr. Keith. I used to shoot a lot of that one.
|
|
|
|
Joined: Feb 2010
Posts: 17,904 Likes: 7
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2010
Posts: 17,904 Likes: 7 |
You are correct about Skeeter's load, I wanted something with less recoil thus the switch to a 200gr. bullet.
|
|
|
|
Joined: Nov 2002
Posts: 33,857 Likes: 21
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2002
Posts: 33,857 Likes: 21 |
And it was in the 44 Special.
Conduct is the best proof of character.
|
|
|
|
Joined: Mar 2018
Posts: 3,450 Likes: 1
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2018
Posts: 3,450 Likes: 1 |
Lee Crimping die.
Remove the carbide ring when desiring bullets to stay at .430,.431, etc. or you'll resize back down.
Don't ask me about my military service or heroic acts...most of it is untrue.
Pronoun: Yes, SIR !
|
|
|
|
Joined: Dec 2004
Posts: 14,488
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2004
Posts: 14,488 |
I only load cast bullets in handgun cartridges, and I don't have any evidence that it really makes any difference in performance but I like to have a seating die set up just for seating the bullet and another one just to put on the crimp...roll for revolvers and taper for self loaders.
Don't be the darkness.
America will perish while those who should be standing guard are satisfying their lusts.
|
|
|
|
Joined: Feb 2010
Posts: 15,890 Likes: 12
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2010
Posts: 15,890 Likes: 12 |
Handgun or rifle cartridge, if I’m going to crimp the bullet, I do it in a separate step.
NRA Life,Endowment,Patron or Benefactor since '72.
|
|
|
|
Joined: Nov 2002
Posts: 33,857 Likes: 21
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2002
Posts: 33,857 Likes: 21 |
Lee Crimping die.
Remove the carbide ring when desiring bullets to stay at .430,.431, etc. or you'll resize back down. This for all of my handgun rounds needing a roll crimp.
Conduct is the best proof of character.
|
|
|
|
Joined: Jul 2009
Posts: 908
Campfire Regular
|
OP
Campfire Regular
Joined: Jul 2009
Posts: 908 |
There appear to be several different Lee crimping dies available on line. Can anyone provide a link to the best version appropriate for roll crimping.
Thanks
If you can't be a good example, may you at least serve as a dreadful warning
|
|
|
|
Joined: Feb 2004
Posts: 2,384 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Feb 2004
Posts: 2,384 Likes: 1 |
Lee Crimping die.
Remove the carbide ring when desiring bullets to stay at .430,.431, etc. or you'll resize back down. I keep seeing this repeated on forums, but I've never experienced this myself. I use the Lee FCD and the Lee Collet for crimping 44mag and they absolutely DO NOT size the bullet.
|
|
|
|
Joined: Feb 2004
Posts: 2,384 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Feb 2004
Posts: 2,384 Likes: 1 |
There appear to be several different Lee crimping dies available on line. Can anyone provide a link to the best version appropriate for roll crimping.
Thanks Follow this link (in my sig line) for info on crimping as I use both the FCD and the Lee Collet. https://sites.google.com/site/hobbyhintstricksideas/home/crimping-44-magnumI usually buy on Amazon unless one of the retailer has a better price.
|
|
|
|
Joined: Mar 2018
Posts: 3,450 Likes: 1
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2018
Posts: 3,450 Likes: 1 |
Lee Crimping die.
Remove the carbide ring when desiring bullets to stay at .430,.431, etc. or you'll resize back down. I keep seeing this repeated on forums, but I've never experienced this myself. I use the Lee FCD and the Lee Collet for crimping 44mag and they absolutely DO NOT size the bullet. https://leeprecision.com/reloading-dies/hand-gun-dies/lee-carbide-factory-crimp-die/**A carbide sizer inside the Carbide Factory Crimp die post-sizes the cartridge while it is crimped so every round will positively chamber freely with factory like dependability. **
Don't ask me about my military service or heroic acts...most of it is untrue.
Pronoun: Yes, SIR !
|
|
|
|
57 members (35, 6mmbrfan, 10gaugemag, 7mm_Loco, 808outdoors, 7 invisible),
14,381
guests, and
1,111
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,195,228
Posts18,543,999
Members74,060
|
Most Online21,066 May 26th, 2024
|
|
|
|