Home Forums Gear Free Classifieds Need riser scope rail for AR15

Needs to be extended as well.

I used one of these in the past. Decent quality. Yankee hill also makes one.

https://www.ebay.com/itm/265421168880?hash=item3dcc55a0f0:g:QNoAAOSwXitcStJ8

I have one I think, let me look.

nope sorry don't have one.

I have a Wyoming Arms Optic Riser if you are interested, it's not cheap but I would make you a deal on it.

Wyoming Arms Optic Riser

Weaver makes a nice one. Either flat or 20 moa of cant. About 50-60 bucks.

Still in need

Once more up

I have a 1 in. from rail to enter of scope is 1 3/4 in.

Please explain your response, 1lesfox. You lost me..

I think most folks use scope mounts like these for ARs. They both raise it up and move the optic forward. The 1.5" is std height and 1.7" and 1.93" are also avail (as well as 1", 30mm, 34mm):

Ex: of an economical Leupold option (Vortex are also good and economical):

Ex: of a more expensive but coveted mount Like a Badger or Geissele:

It is for a 1 in. scope. From rail to center of scope 1 3/4 in.

Thanks. Looking for something a bit longer...

I wasnt aware of the type of product some of yall posted. Some look to be designed to clamp on the receiver and the handguard picitinny rails.

Re those types, isn't it widely accepted as not a great idea to "bridge the gap" with a mount between the two rails? I have no experience myself but it makes sense as almost every handguard flexes somewhat, and Ive read numerous suggestions against it re accuarizing a rifle. They all mention that it will introduce flyers and randomness to your groupings. To what extent who knows. YMMV

If you’re talking about the Wyoming Arms riser / bridge - it’s pretty much bomb proof.

My rail would break before the Wyo Arms riser did - it’s solid to the receiver.

The flex taboo was a separate ring on the upper, and a separate ring on the rail.

Op - are you looking for an A.R.M.S. Swan Sleeve type rail?

https://www.mountsplus.com/arms-swan-sleeve.html

What I am looking for needs to be 8-9" long, extending over the handguard..

Hey jp, just trying to learn here. Do you mind saying what you're planning to put on this length of rail? Thx

Need the length for moving the scope fore and aft, to accomodate Off Hand, Sitting and Prone positions..

Try this from EGW: https://www.egwguns.com/ar-extendariser-picatinny-rail-clamp-on-mount-0-moa

Ok I think you're looking for one these, or similar types:

A.R.M.S.® #38™ S-Ex SWAN® Sleeve - NSN 1005-01-469-7724

https://www.herooutdoors.com/a-r-m-s-s-ex-swan-sleeve/

https://www.herooutdoors.com/a-r-m-s-super-extended-mod-gen-ii-sleeve/

gman has found what I was looking for
Thank you...