Home Forums Gear Free Classifieds FS - Precision AR 18” barrel build

18” Precision AR build

$1,075 shipped to your FFL (lower 48 only)


I built 4 variants of these for precision shooters and am putting a couple of them up for sale here.
the basic premise is to get a AR that shoots like a two thousand dollar AR but costs almost half as much.
I built these using the Gordy Gritters method of Accurizing an AR… and I’ll post the group of that specific test firing (first 4 rounds) on a target from 100 yards. With these all you have to do is throw what ever M-Loc mount parts you want on the forearm, and maybe buy a better buttstock like the Bravo B5… I went this route so a guy doesn’t have to spend money on a buttstock he doesn’t want for the rifle, and then buy a better one later…



Build details -
Upper Lower = Aero Precision
All upper lower parts - White Oak Armament
Bolt Carrier Group = White Oak Armament
Trigger - Geissele SSA-E
Forearm - WOA M-loc 12.6”
Barrel - 18” white oak armament SPR 1-7 twist Wylde chamber
Barrel thread protector = YHM
1 each Magpul 10 shot P-mag
Pistol grip & collapsible Buttstock = Bushmaster


The barrels are Bedded to the receiver (Gritters method)
The bolt lugs have been lapped to the specific barrel
And the barrels are bore scoped, and lapped lightly if they need it
The triggers don’t need any help.

the serial number on the target and the rifle match - but the picture size I could upload makes the rifle SN unreadable - if you want I can send you the full size pictures via email…

Tag...

Is the gas block the standard non adjustable that WOA puts on?

It’s their standard block, the can be changed out with set screws (they don’t use pins)

BTT

The ammo I used was some of my 10 year old Pdog ammo that was laying around..
Targets were at 100 yds..

Twist?...Wylde chamber?

1:7 twist Wylde chambers.

These are the White Oak Armament SPR barrels..