Home Forums Hunting & Shooting Handguns RMR bullets

Anyone use the RMR Nuke hollow points they make in house? I ordered a box the other day and they look good. Loaded a few last night I might go shoot today.

I got semi tired of dealing with casting and sizing bullets for 9mm and ordered 500 of the 115gr. If they shoot and function well I’ll likely order a couple thousand for sock away, they’re cheap enough. Price is comparable to FMJs from the big manufacturers.

I've got no experience with the RMR Nuke bullets but don't forget American Reloading for cheap bullets. Back around Black Friday they had 115gr 9mm plated RN blem for $35/1000 shipped.

I've gone through thousands of them, not all nukes, most just the std HP. All of my High Powers improved grouping compared to the RN Plated that were the std fare. Good service and packaging.

I am waiting for the 147 Nuke to show up in the line up....

That’s good to hear. The only 9mms I own currently are HiPowers. I have lots of Power Pistol so that was the powder I chose to start with.

Well I dragged out to the farm for a test run. 6.2gr of PowerPistol under the 115 with a 1.085” OAL shot right to the sights at 40 yards and fed and functioned fine. I guess I’ll load up a box or two to have on hand and maybe order another load of bullets.

I've shot the RMR MPR (prior to the nukes). One thing I ran into is that the ogive is pretty far forward. Therefore, if loading for several 9mms, do a plunk test to make sure they feed and lockup correctly.

If you are just looking to load to shoot popcans and other stuff look at buying hi-tek coated bullets from Hoosier, DG, or summit city. I do buy bullets from rmr use the124 out of a 357 sig.