Home Forums Gear Free Classifieds .38-55 dies and bullet molds, .375 gas checks

See the pictures. Reloading dies and molds are lightly used and in good shape.

RCBS 38-55 Cowboy die set. This comes with two expanders, .376" and .379", and I'll toss in an RCBS #2 shellholder. $70.00 shipped

Hornady .375 gas checks. One sealed box of 1000 and an open box of 237, give or take a couple. $65.00 shipped for both boxes.

RCBS 37-250-FN two cavity mold. The mail order houses want about $120 for these, I'll take $95 shipped.

Accurate Molds 38-250G, four cavity, 3.45" aluminum blocks. With my home brewed #2 alloy this drops bullets at .378". $120 shipped

First "I'll take it" gets it. Your personal check is fine but a money order is okay, too. If you are not happy with what you get you can return it within three days of receipt in the same condition as received and I would refund your money less the actual cost of shipping. I'll count every one of those gas check, too, so don't try any funny business.

The molds should work with any .375 caliber rifle. My Winchester 1885 barrel slugs .375" exactly, I size the bullets to .377 and they shoot great.








This is where the bullets sit in the case loaded to touch the lands of my Winchester 1885. The Accurate bullet is on the left, the RCBS on the right. Your throats may vary.

Can 38-55 also load 375win?

Do you mean the dies? I would doubt it, the .38-55 case has more taper than the .375 and I believe the .375 has thicker case walls. Sizing would leave you with a too small inside diameter.

BTT

Do you take PayPal?

No, I dropped PayPal many years ago.

Let's try some lower prices.

RCBS 38-55 Cowboy die set. This comes with two expanders, .376" and .379", and I'll toss in an RCBS #2 shellholder. $70.00 $60.00 shipped

Hornady .375 gas checks. One sealed box of 1000 and an open box of 237, give or take a couple. $65.00 $55.00 shipped for both boxes.

RCBS 37-250-FN two cavity mold. The mail order houses want about $120 for these, I'll take $95 $80 shipped.

Accurate Molds 38-250G, four cavity, 3.45" aluminum blocks. With my home brewed #2 alloy this drops bullets at .378". $120 $100.00 shipped

PM sent

If you will take $150, I'll take the:
Accurate Molds 38-250G, four cavity, 3.45" aluminum blocks. With my home brewed #2 alloy this drops bullets at .378". $120 $100.00 shipped
and
Hornady .375 gas checks. One sealed box of 1000 and an open box of 237, give or take a couple. $65.00 $55.00 shipped for both boxes.

And replied to.

The Accurate mold was spoken for just a few minutes before your post but do you still want the gas checks at $55.00?

Still available:

RCBS 38-55 Cowboy die set. This comes with two expanders, .376" and .379" and an RCBS #2 shellholder. $60.00 shipped

Hornady .375 gas checks. One sealed box of 1000 and an open box of 237, give or take a couple. $55.00 shipped for both boxes.

RCBS 37-250-FN two cavity mold. $80 shipped.

What diameter bullet does the RCBS mold drop?

With my alloy they drop right at .377". It's from a #2 recipe in the Lyman manual but measures 13 BHN (air cooled) on an LBT hardness tester so it's probably a wee bit heavier on the lead proportion.

Thanks, needing .379" for a Marlin 1893 38/55

I have a dremel tool around here somewhere, I'll get back to you...

Still available:

RCBS 38-55 Cowboy die set. This comes with two expanders, .376" and .379" and an RCBS #2 shellholder. $60.00 shipped

Hornady .375 gas checks. One sealed box of 1000 and an open box of 237, give or take a couple. $55.00 shipped for both boxes.

RCBS 37-250-FN two cavity mold. $80 shipped.

BTT for the weekend shoppers.

PM sent

Jim, if you still have them, i will take the Cowboy die set package..