Home Forums Hunting & Shooting Hunting Rifles Winchester Model 54 factory options

Print Thread

Hop To

Winchester Model 54 factory options #18157969 02/20/23
Joined: Dec 2020 Posts: 21 Michigan J jmbutzin OP New Member
OP jmbutzin New Member J Joined: Dec 2020 Posts: 21 Michigan	Does anyone know if Winchester offered receiver drilling and tapping as a factory option for optics on later model 54’s? Thanks.

GB1

Re: Winchester Model 54 factory options jmbutzin #18158041 02/20/23
Joined: Jul 2005 Posts: 23,510 Alaska valley trash 7 79S Campfire Ranger
79S Campfire Ranger 7 Joined: Jul 2005 Posts: 23,510 Alaska valley trash	No, only front receiver was drilled and tapped. Any model 54 that’s drilled and tapped for a scope also has had the bolt altered to work with a scope. All this done by a gunsmith not Winchester. Originally Posted by Bricktop Then STFU. The rest of your statement is superflous bullshit with no real bearing on this discussion other than to massage your own ego. Suckin' on my titties like you wanted me.

Re: Winchester Model 54 factory options jmbutzin #18158058 02/20/23
Joined: Jul 2005 Posts: 23,510 Alaska valley trash 7 79S Campfire Ranger
79S Campfire Ranger 7 Joined: Jul 2005 Posts: 23,510 Alaska valley trash	Also the pre64 were not d&t not until around sn 60000 they were D&T from the factory 1947 time frame. H&H receivers were d&t around sn 63500. Originally Posted by Bricktop Then STFU. The rest of your statement is superflous bullshit with no real bearing on this discussion other than to massage your own ego. Suckin' on my titties like you wanted me.

Moderated by RickBin

Link Copied to Clipboard

AX24

600 members (1beaver_shooter, 10ring1, 10gaugemag, 12344mag, 06hunter59, 10gaugeman, 65 invisible), 3,008 guests, and 1,277 robots.

Key: Admin, Global Mod, Mod

May
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Forum Statistics

Forums81

Topics1,193,753

Posts18,514,711

Members74,010

Most Online11,491
Jul 7th, 2023

Responsive Width:

PHP: 7.3.33 Page Time: 0.118s Queries: 20 (0.004s) Memory: 0.7981 MB (Peak: 0.8227 MB) Data Comp: Zlib Server Time: 2024-05-16 02:46:50 UTC
Valid HTML 5 and Valid CSS