Brand new Lilja unchambered barrels & a JES rechambered Remington 700 barrel in 358 Winchester. Liljas are all stainless. All are 6 groove. $300 shipped per Lilja barrel.
These are all barrels I accumulated for projects...time to clean the closet out.
.375 1:12 Remington Sporter Contour, 30" blank, muzzle diameter at 26" is .650, you could get down to .630 if you run a very short shank. This was going on a lightweight 375 H&H build but I decided to go another direction.
.358 1:12 Remington Sporter Contour, 28" blank, same dimensions as above. Also it's a Remington Sporter contour so same as what comes on the M700 35 Whelen.
6.5mm 1:8 #1 Lilja contour. 6 groove, 28" blank, muzzle diameter at 26" is .560, at 22" it's .580. Nice light contour for any 6.5.
Remington Mag Sporter contour rebored to .358 Winchester by JES. 18.5", 3 groove, 1:12. Muzzle is threaded 9/16x24 for a suppressor, brake, etc. weight is 36 ounces so it's fairly light. By comparison a standard Remington 6.5 creed sporter barrel is 43 ounces (at 24").
This barrel shoots both Hornady and Winchester factory 200gr ammo into under an inch. 49.5gr of TAC under a 200gr accubond at 2.80 shoots into about .80. It's right at 2500 fps with the TAC load.
It's been carried a fair bit and is currently covered in some color of Alumahyde that looks green to me. Like most rebored Remingtons there is a little bit of tearout from the reboring process, but it shoots extremely well. Screw it onto your rifle and shoot.
