I went ahead and made a short video of the 650 and how it works. If you are not in front of the camera and listening to tunes while you load, you can crank out a bunch of loaded ammunition in a short time...
I went ahead and made a short video of the 650 and how it works. If you are not in front of the camera and listening to tunes while you load, you can crank out a bunch of loaded ammunition in a short time...
Wow, I had to watch that 4 times before I ever saw the press, don't think you will run out of anything for a while. Thanks for taking the time to do a video.
Used two Hornady Projectors loading for my High Power Rifle habit. One for deprime, size/trim and a M die to open the neck up. The second one just prime, powder drop and seat bullet. Cleaned cases and debur as needed in between.
Later on I traded in one of the Projectors and $200 for a new LnL. Mostly use it for 9mm now. Kept the other Projector, it still works great. The new LnL required some tinkering to get it working decent.
Have a Super 1050 that most always is set up to run .45acp. I love that press. Its a little more complicated to set up and cost more but has a few features the 650/750 don't. Mainly it has a station to swage crimped primer pockets. That is a great feature for stopping the press when a small primer .45 case slips in. Also the primer is seated on the down stroke and the depth is adjustable.
Everything cost more now but I think I'd still go for a new RL 1100 if your budget allows, especially if you load a lot of the same ammo.
If cost is a thing the 750 will get it done just as quick.
I like Mr. shrapnel's primer tube filler, I'm using one of the pistol grip buzzers that don't work so well.
I have a year to decide, they are all impressive, my grandson won't be back from Africa for a year. I plan to teach him on my single stage press, then surprise him with the automatic, might even buy him 2, I want him to have what I wish I would have had when I was young. At this point, money is no object. I just don't want my stuff sold in an estate sale. He only shoots 9's and .223 now, but as he gets older, that will change. I even heard scuttlebutt about sniper school in his future. Yes, I did study the 1050 and 1100. I read the reviews on every site that sells presses, it is a learning curve for sure. BUT the only negative I have read was on the LnL.
blind shooter, I have to ask, what are those PVC pipes with the wire in them for?
I have a year to decide, they are all impressive, my grandson won't be back from Africa for a year. I plan to teach him on my single stage press, then surprise him with the automatic, might even buy him 2, I want him to have what I wish I would have had when I was young. At this point, money is no object. I just don't want my stuff sold in an estate sale. He only shoots 9's and .223 now, but as he gets older, that will change. I even heard scuttlebutt about sniper school in his future. Yes, I did study the 1050 and 1100. I read the reviews on every site that sells presses, it is a learning curve for sure. BUT the only negative I have read was on the LnL.
blind shooter, I have to ask, what are those PVC pipes with the wire in them for?
They are cleaning rod tubes. Not wire, para-cord so the PVC threaded caps don't get lost. Learned the hard way cleaning rods in a pile of match shooting gear will get ruined.
There are some wires hanging down from a LED light used on the press.
Dillon makes carbide dies and the 223 is available in carbide. You do not need to use lube but I give a couple spritz of Dillon case lube. I have had 2. 550’s, 1. Square deal, 5. 650’s. I prefer the 650’s especially loading pistol cases. Hand rotation leave a possibility of a double charge in pistol rounds. Also avail is a lockout die which is a added safety measure. I wouldn’t wait until he returns, get it now and learn to use it. It will make loading with your Grandson more Pleasurable in my opinion. In that time you will become proficient and be able to teach him the ins and outs of the press.
"What we obtain too cheap, we esteem too lightly: it is dearness only that gives every thing its value. Heaven knows how to put a proper price upon its goods; and it would be strange indeed if so celestial an article as freedom should not be highly rated." Thomas Paine
I pretty much have decided on the 1100 Dillon, with all the amenities. Will get it with the carbide .223 dies. I have the 9mm dies and a rather large box of brass. All the primers and powder. Now, I have to admit to my ignorance on loading 9mm. Never shot a 9 or loaded for one. Being old school, I'm a revolver man. I know my way around .38/.357, 44mag/special. My confusion is bullet weight for the 9. Should I order 115, 124, 147gr? I know it comes down to what the gun likes, but I do not have access to his gun. I want to get a couple thousand and be ready when he gets home, we will just load plinking, practice rounds for now. I do know he has a Beretta 92, but I have not seen it. He lives 1100 miles away when he is home.
I was pretty much in the same boat a couple of years ago. I ended up going with 124 grain. For your use the 115 or 124 would be more than good enough. Whatever you can find the cheapest, in stock and in bulk. I haven't used them myself, but Rocky Mountain Reloading is often recommended on here as a good source for bulk bullets. I'm still burning through some Xtreme bullets I bought before seeing the Rocky Mountain stuff.
I started out with a Dillon 450. No Tool Head, and no Star Wheel. Other than that it worked very well. I sold it to a friend and replaced it with a 550. It was a very good reloader. Probably four or five years ago I got a chance to pick up a couple of as new 550's. My old 550 was sold to another friend, and I upgraded to the newest version of the 550, and my brother picked up the other one. I have added Dillon Dies over the years in 38 Special, 40 S&W, 45acp and a second set for 45GAP. I also have 44 Magnum, I believe my 480 Ruger dies are still RCBS. I prefer to index the rounds myself. I have a light so that I can check the case for powder. I also like the slower pace which allows me to check each primer to make sure it is in place and facing the correct direction before seating. I am perfectly happy with the 550, and have no plans to upgrade to a faster press.
I have two Dillon 550s and a square deal press .I have used them for 25 years they are far from perfect to say the least .Their famous for spilling powder and flinging the powder measure off .I actually stretched my 550 press trying to form brass on it so you need a regular press if you are going to format rifle brass. I WORE my first one out from that brass forming not made for that .They work pretty good with new brass if it's starline but alot of brass will give you total fits seating primers that's the other thing bad about them that primer system is not that good I has tons of problems with it too. HORNADY brass and dies gave me fits on my Dillon I stay away from them total junk .starline brass is awesome no problems from it It's hard to load little cases on the 550 too will wear your fingers out on anything littler than 357 .It's giving me total fits with 10 mm about to give up loading it .I had good luck loading 454 with starline brass 41 mag with starkine 357 rem max with rem brass .223 is terrible to load on it if you have once fired range brass I just quit loading it
Hornady all day..... But if Dillon 750 Got both, no problems with either. Just prefer red
If not for the priming system and pawl screw issues, then perhaps the LnL. Maybe… If you’re going to drink the blue Kool-Aid, I’d at least get the auto indexing 750.
I have two Dillon 550s and a square deal press .I have used them for 25 years they are far from perfect to say the least .Their famous for spilling powder and flinging the powder measure off .I actually stretched my 550 press trying to form brass on it so you need a regular press if you are going to format rifle brass. I WORE my first one out from that brass forming not made for that .They work pretty good with new brass if it's starline but alot of brass will give you total fits seating primers that's the other thing bad about them that primer system is not that good I has tons of problems with it too. HORNADY brass and dies gave me fits on my Dillon I stay away from them total junk .starline brass is awesome no problems from it It's hard to load little cases on the 550 too will wear your fingers out on anything littler than 357 .It's giving me total fits with 10 mm about to give up loading it .I had good luck loading 454 with starline brass 41 mag with starkine 357 rem max with rem brass .223 is terrible to load on it if you have once fired range brass I just quit loading it
You're doing something wrong man
I could wish a lot of things on my worst enemy but neuropathy ain't one of them.
I was all set to purchase the 650.and called Dillon direct . The guy talked me out of the 650 for what I wanted in a Press and told me to get the 550B When I received it I set the Primer feed up wrong and Primers were going all over the place.
I called Dillon and they sent me an entire new Primer feed system at no cost to me.
Then I found out that it was my screw up setting the feed up wrong. I called Dillon again to try and send back the replacement system they told me no it was mine. I told them well then let me pay for it because it was my screw up and they told me nope it was mine have a nice day.
Dillon has some of the best Customer Service that I have ever experienced in any company that I have done business with.
And what Company out there will talk you out of purchasing a higher priced item for one of there lower priced items. No one will do that.
I absolutely Love my 550b and i am so happy that Dillon talked me into purchasing that one.
That said I have never used their 650 or any of their other presses.
I did use a Lee progressive made probably in the 60s or 70s. It was set up for 38sp's and was a pain to change calibers.
I do not have any other experience with Progressive Presses so I can not talk about them and be objective.
I was all set to purchase the 650.and called Dillon direct . The guy talked me out of the 650 for what I wanted in a Press and told me to get the 550B When I received it I set the Primer feed up wrong and Primers were going all over the place.
I called Dillon and they sent me an entire new Primer feed system at no cost to me.
Then I found out that it was my screw up setting the feed up wrong. I called Dillon again to try and send back the replacement system they told me no it was mine. I told them well then let me pay for it because it was my screw up and they told me nope it was mine have a nice day.
Dillon has some of the best Customer Service that I have ever experienced in any company that I have done business with.
And what Company out there will talk you out of purchasing a higher priced item for one of there lower priced items. No one will do that.
I absolutely Love my 550b and i am so happy that Dillon talked me into purchasing that one.
That said I have never used their 650 or any of their other presses.
I did use a Lee progressive made probably in the 60s or 70s. It was set up for 38sp's and was a pain to change calibers.
I do not have any other experience with Progressive Presses so I can not talk about them and be objective.
The way I look at it is how many rounds will you load in a session, and how often will you change calibers?
The advantage of the 550 is lower initial cost, less expensive cartridge conversions and less time to convert between calibers, the downside is it's slower because you have to feed cases and bullets manually.
The advantage of the 750 is you can load faster, but the downside is higher initial cost and cost of cartridge conversions.
I'm happy with the 550 because I load from 100-500 rounds in a session and have it set up for 1/2 dozen calibers (and growing) If I was loading 1000 rounds or more in a session I'd seriously consider a 750.
The 550 is simple. Priming slide travel can get sticky. There's a roller gizmo fix. Other than that, prefer it over my 1050. Latter is one smooth sumbitch, until something goes wrong.
Judgment comes from experience (especially with age). Experience comes from bad judgment. Simple is best for this bear of little brain.
The way I look at it is how many rounds will you load in a session, and how often will you change calibers?
The advantage of the 550 is lower initial cost, less expensive cartridge conversions and less time to convert between calibers, the downside is it's slower because you have to feed cases and bullets manually.
The advantage of the 750 is you can load faster, but the downside is higher initial cost and cost of cartridge conversions.
I'm happy with the 550 because I load from 100-500 rounds in a session and have it set up for 1/2 dozen calibers (and growing) If I was loading 1000 rounds or more in a session I'd seriously consider a 750.
One of the things I really like about my 550 is that I can pull a pin and take the case with the powder charge out from time to time and check the charge.
Some of the other Dillon Presses you can not do that very easily from what I have been told.
I started reloading on a single stage RCBS Rock Chuker and really liked it but then I got into shooting a lot more than that single stage would keep up with
I now load 15 different cartridges and changing between them is just a few minutes.