|
|
Joined: Apr 2006
Posts: 4,399 Likes: 1
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2006
Posts: 4,399 Likes: 1 |
With the hybrid longbows I build, I cut the sight windows 3/16" past center. With 55# @ 28" draw, a 340 spine carbon cut at 29.5" with brass insert and 160 gr point shoots great for me. Arrows have a total weight of +/- 500 gr. The 3 Rivers spine calculator is a very useful tool that I use for every new combo I put together.
|
|
|
|
Joined: Aug 2021
Posts: 1,901 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Aug 2021
Posts: 1,901 Likes: 1 |
Well chit. Been using GT carbons since 2002 and put inserts in w hot gun glue. Works great. Am careful about heating tip w insert attached, (propane torch). Glue that and then slide into shaft ( tip and insert assembly held by pliers ).
Have done it hundreds of times, even remove and replace. Think I damaged one. One.
New batch of lower end GTs, damaged 3 out of 6. Scrapped em all, tossed my 100gr brass inserts in trash too. Not worth my time to remove adhesive.
Must have gotten a less than ideal batch. Switch to that cheap Walmart 2 part 15 min epoxy. I've used it and never had an insert come out with it. I do clean the inside of the shaft with a Q tip dipped in acetone or high percentage alcohol.
Last edited by RHClark; 06/13/23.
|
|
|
|
Joined: Feb 2016
Posts: 17,831
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2016
Posts: 17,831 |
Yup. Pick up some GT Pros on way back from wrist dr this week. Epoxy will work as theres no need for experimentation.
FWIW I clean my arrows for insert install too
Last edited by hookeye; 06/13/23.
|
|
|
|
Joined: Aug 2021
Posts: 1,901 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Aug 2021
Posts: 1,901 Likes: 1 |
Yup. Pick up some GT Pros on way back from wrist dr this week. Epoxy will work as theres no need for experimentation.
FWIW I clean my arrows for insert install too You mention experimentation. When I tune my bare shafts I always epoxy the insert in and cut for tuning from the nock end. I only play with about 3-4 arrows though before I decide the length to cut them all.
|
|
|
|
Joined: Feb 2016
Posts: 17,831
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2016
Posts: 17,831 |
I cut from the front, and used hot melt glue, done it for decades. Exp and tune for a dozen plus diff recurves, no probs............til this batch LOL
But I have arrows already done for this bow. Was just making another half doz, the way I always do.
No experimentation needed. So will just epoxy the next batch. Its my last recurve anyway.
Gave away my Magnus Stingers to somebody in a pinch a couple seasons ago. Need to get some more.
|
|
|
|
Joined: Aug 2021
Posts: 1,901 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Aug 2021
Posts: 1,901 Likes: 1 |
I cut from the front, and used hot melt glue, done it for decades. Exp and tune for a dozen plus diff recurves, no probs............til this batch LOL
But I have arrows already done for this bow. Was just making another half doz, the way I always do.
No experimentation needed. So will just epoxy the next batch. Its my last recurve anyway.
Gave away my Magnus Stingers to somebody in a pinch a couple seasons ago. Need to get some more. I haven't fooled with archery in a while. I was into trad stuff and target recurves very heavy about 10 years ago. I injured my shoulder and didn't shoot for a year and just got out of it. Shoulder is fine now. I need to find a good 3D shoot locally and take my 14 year old boy.
|
|
|
|
Joined: Feb 2016
Posts: 17,831
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2016
Posts: 17,831 |
Ordered GT Pro 400s. Supposed to rain this weekend. Arrow buildin/ beer drinkin is the plan.
|
|
|
|
589 members (10gaugeman, 10gaugemag, 160user, 1936M71, 10ring1, 12344mag, 62 invisible),
2,388
guests, and
1,163
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,857
Posts18,497,088
Members73,979
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|