Home Forums Hunting & Shooting Hunter's Campfire Being a Baller with layaway, AR,s LNIB, and a simple fix

The Swiss bank account acquired per each day's daily allowance of 20 to 30 bucks adds up.
I can usually squirrel away 500 550 ish a month and keep myself in smokes and gas.
Repeat as needed.

Keeps the khanarella off my azz per her banking notification app.
Hate even hearing her piehole...
Makes me a super cuck I geuss...🤣👍🏻🤣
Even put deposits back into account for online buys from Swiss bank account fundage.
Did I mention hate hearing her piehole???
🤣🤣🤣

Anyways a simple bound up selector switch detent pin and spring fix. I did with a screw driver, small jewelers file,some oil,star washer, and a new detent spring on a rather decent build on another AR in the shop.
Got me 75 bucks off a LNIB Stag mod 2 that the shop picked up in a huge buy of firearms at a estate sale about 5 weeks ago.
Some old cat just buying guns to collect them.
Which ain't a bad thing...
They have like 15 pristine K98 Mausers all correct also.
About 20 other various long guns also.
0 handguns from the estate sale.
The dead cats brother wanted all of those.

They been putting guns out on the rack as spaces open up.
This stag and a couple of others showed up last Thursday on the rack.

They went on 4th of July vacay from Friday to today.
The build gun was out Thursday and had the bound up selector switch when I checked a bunch of guns out.
They were selling it as is.
I was kinda scratching my head thinking no one could figure out what the simple issue was with it???
Guy that built it put on some crazy after market shorty pistol grip with no star washer under the bolt and the channel for the spring was obviously too short in depth for the spring.
But whoever tightened the schit outta it and compressed the schit outta that spring.
I had to use a pair of pliers to grip the screwdriver to break the bolt loose.
Cone of detent was flattened on top a little being pushed into the selector switch recess and groove.
I'm guessing whoever might have worked the selector 3 or 4 times and it locked up from pressure mash and friction wear.
Old hardened white lithium grease in the receiver hole and funky shorty pistol grip hole for the detent pin and spring channel

So homie hatched a plan to get in good graces and get some Benjamin's off the model 2.
Star washer yup got that...
Small jewelers file, got that...
Selector switch detent spring , got that

Talk to Grady at shop.
Lay out stuff to him.
Sure man fix that thing if you know what is wrong.
I will work with ya on the Mod 2 price.

15 mins later after a slight round over cone top file job of selector detent , drop in new selector detent spring into A2 pistol grip he gave me out of his parts box.
Bolt and star washer into grip.
Little lube as needed.
Reassemble
Function check about 10 11 times.

He took off that "as is tag" and bumped up the price 50 on that gun
So he was out basically 25 and gave me a solid afaic.👍🏻


Wundabar.
75 bucks off the stag mod 2...
Got plans to drop about 500 into this over the rest of the summer.

Elf trigger
Vg6 gamma 5.56 muzzle device
Primary arms red dot with motion sensor off and on.
Co witness it with the front sight post and flip up.
Lay down some fast, accurate, large volume of fire schit.
For Mooks........🤣

👍🏻👍🏻👍🏻







Oh....
Dropped that receipt to see what I can catch with some stink bait.
Have done that a couple of times over the past.

Me and the Khanarella are worth much more than what my baller azz has ever let onto on here over the years.

We have plenty of other asset investments and plans that over 5 x that checking balance.
We ain't rich , but we certainly ain't poor...
And we both have nice monthly incomes coming in each month.
Even more when I get that SS fun money in 2 years at 62.


No fixed income special kitty dinner SS existence here...

I have loved the pitiful attempts of dumb fuggs trying to bust my chops on here over the years thinking I am a pauper.

I'm just frugal...
Needs outweigh wants.

And I don't like to hear the old ladies piehole.
And I have a method to my madness...
So please call me a cheap cuck.
I love it.
I relish the role of dickhead extraordinaire on here also.

🤣🤣🤣🤣🤣


I'm out...
Just gonna sit back and chuckle as appropriate now.
👍🏻👍🏻👍🏻

You do play it well !!

What I’d like to know is how you trained a bear to hold your rifle?


Nice s ore by the way.

👍👍


Im partial to Stag ar’s since they cater to LH.

Ya just had to go and prove the haters wrong once again didnt you! Enjoy the Stag...I have a Stag 15, it isnt a bad rifle at all for the money.

I hit the Primary Arms Andro Corp AR deal on the 4th so my son can quit trying to steal my 6920.

I had to eat cat food tonight, but it was the fancy kind.

😁

Good deal! The trigger alone is worth half of what you paid.

Gotta live cheapie AR gets. I got a complete ‘blem’ lower from PSA for $149. Had a stripped upper already and the boy wanted some of my 45 ACP ammo so he gave me an extra bcg that he had. Found a wilson barrel on the cheap from JSE surplus. Spent another $150 on the rest of the upper for hand guard, gas tube and various accouterments. Put in a 3.5# trigger so I’m into it somewhere around $600. had a schtti Tasco 3-9 sitting around so I threw it on to try it out. 3/4” groups off the bed rail of my truck at 100 yards. I’m sure I can do better with a decent scope and rest. The thing shoots better than my National Match AR does at half the price.

I like Stag Arms

I just got a heck of a deal today on a 2 1/2 ton F 750 Ford septic tank truck. I don't know what I'm going to do with it, but it runs great and the overhead wench can lift the front end off the ground. More yard junk just waiting for scrap prices to go up

This slips over the gamma, directs the gases forward like a linear brake, best of both worlds:

https://www.wingtactical.com/firear...device-for-gamma-epsilon-muzzle-devices/

Dude...

You should have bought a Wyoming Arms.

I like Stag stuff but that buttstock with "Stag Arms" all over it would have to go.

It's like the guys that put "Cummins" or "Ford" or dumb shìt like that on the back windows of their trucks.

It's a sticker.
Just like everything I have owned.
It will be removed.
Homie don’t do stickers or decals.

👍🏻

I have a pretty confident feeling this Stag/ gravel pit keg party gal can stand waaay more than a WA/ prissy prom queen she shack set up.
All I need is a 50 200 yd zeroed wpn.

Don't need or want a long range semi automatic rifle with a 140 dB "Silencer"..

👍🏻

I don't own one but.. same here

Nice rifle, renegade.



Lol.

Nothing wrong with being thrifty.

Get yourself one of those K98's!

The gamma ain't that bad.
Don't really notice it as the shooter.
Had one on a TE Warfighter and a FN .


I don't go to ranges around here where other people are so close side by side that I'm blasting someone's ears out.
I will deliberately look for a end spot on line and tell a person that shows up they might wanta leave a empty station between me and them per me shooting a comp/ brake.

But in the past I have been on ranges next to people with some abnouxious brakes/ comps.
Not pleasant...
Time to move...

Alot of times if ya ask someone with a brake / comp to keep a empty station between you and them when they arrive they understand why.
This above applies to experiences at Montgomery County shooting complex where the benches are literally 4.5 to 5 ft apart.
Continuous running pic nik bench set up with chicken wire between each station.
Pretty chintzy schit...
Dude shooting next ta ya , feel it all on your station transmitted thru the 2x4,s and plywood.

Don't apply to Cheatham range.
Benches are 15 to 18 ft apart.


One of the reasons me and slumlord have built 2 ranges .
One behind his house and one on his dad's place.
Ain't gotta worry about public range "issues"
Also can do things with wpns not allowed on public ranges.
Mag dump, bump fire.
Walk drills.
Quick fire drills
Different firing positions and movement.
Ect ect ect.


Ranges need baffled/ angled deflect walls shooting stations for such tight scenarios like Montgomery county shooting complex.
Which has had its rifle ranges being rebuilt due to improper range fans and Berm issues.
They been shut down for almost a year.
Hopefully they make individual benches and not this continuous picnic Bench crap they had from station to station to station.


Say a place has 20 benches..
They need to have 7 or 8 baffled/deflection wave walled for wpns with brakes/ comps...

Their is a pic on cowboys Dan's face book of those K98,s
They was getting inquiries nationwide about em as soon as they put them up.
I looked at a few of em
The guy that had em knew what he was collecting.
Ones I looked at had all matching #,s and the more desirable makers of em.
They had a big Ole list of em on what was what in the shop.
Most of em pre 42 43 made

I don't need another 98.
Sold off the Sako customized one I had last fall and went back to my mod 70 30- 06 as my bolt deer rifle.
Kinda on a ammo commonality kick now.

That stag is a older model 2.
Pretty sure they don't make em anymore.
Actually its the gun that evolved into their M4 clone with the addition of a 1- 7 barrel.

1-9 twist it should shoot 55 and 62 gr well.
Just gotta shoot some different brands see what it likes.
Not what I want it to like.
CL barrel and Cl lined bolt carrier.
Double heat sheild.
Double front sling attachments.
Properly made mechanical wise overall and the right materials.
Got 0 movement between upper and lower.
Tight...
Probably the tightest AR I have broke down and inspected upper and lower wise.

Do some things to it, put the stuff on it I mentioned .
Be a good set up for around 1k overall.