Home Forums Reloading Big Game Rifles Temp Stable Powders for 6mm Reminton

With 90 grain bullets in a 6mm Rem, start off testing with H4350 and if you can't get it to shoot as good as you like, then switch to H4831sc. I use H4350 in one 6mm with 90 grain projectiles and H4831sc with 90 grain projectiles in another...approximately the same velocity at similar pressure with either powder. The H4831sc load is a few grains more, of course. Go to the Hodgdon site.

Will do. Thanks everyone

You'll be hard pressed to do better than H4350 across the board; I have not tried RL-16 in that round, but it works well in the 270.

MM

My experience is with the .243 Win, but I saw that Hunter was mentioned, and in my experience it works well in that cartridge with 95 grain BT's. However, John Barsness reports that in his testing it was not that temperature stable. So if temperature stability is a key criterion it might not be the best choice.

Any reloading manuals do !