Home Forums Hunting & Shooting Rimfires 39A, Conetrol

Has anyone put Conetrol mount and rings on a 39A?

I’m curious if their lows will work with a 6x36.

tag

Buddy had a set on a 39A back about 40 or so years ago, but he was using a fixed 4 power that was a straight tube (read that as a 28 or whatever mm objective)

I have a lot of Conetrols on various rifles / pistols.

The last few years I have been using S&K projectionless bases / rings. I have found I like them better , and I have 25-30 Conetrol set-ups.

If you call S & K they are very helpful.

Thanks for the replies. I’ll give them a call Monday and see what they say.

Forgot about S&K, will have to see if they make anything for the 39s as well.

If anyone was interested, this was Conetrol’s reply:

Thanks for the compliment, Hunter! We have a 1-piece base for that rifle,
so you'd need that and two rings. With the 36mm objective, I'm thinking
Low rings would work. If not, you could always return them for higher
rings.

Depending upon finish/grade, a complete mount would run $250-$300 (through
the end of December). We'll help you out as best we can. Thank you so much
for considering Conetrol.

Don R. Miller