|
Joined: Dec 2019
Posts: 4,680
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2019
Posts: 4,680 |
Gents,
It appears I've got a Winchester three-position wing safety that's out of sync with the firing pin. (Randomly gets stuck, moves, doesn't move; but regardless of how it's functioning, will never come back off of fire to one of the two safe positions while the rifle is cocked.) This is above my garage smithing pay grade. I don't think my usual guy is accepting new work at the moment, so I'm on the hunt for a qualified gunsmith. I'm in central VA but don't mind shipping the barreled action to someone who really knows what they're doing and won't take 8-12 months to do it.
Recommendations?
Thanks y'all.
|
|
|
|
Joined: Sep 2010
Posts: 7,504 Likes: 8
Campfire Outfitter
|
Campfire Outfitter
Joined: Sep 2010
Posts: 7,504 Likes: 8 |
Medics bury their mistakes..
|
|
|
|
Joined: Feb 2010
Posts: 17,874 Likes: 3
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2010
Posts: 17,874 Likes: 3 |
+1 on Jim Kobe, fair prices and quick turnaround.
|
|
|
|
Joined: Nov 2005
Posts: 126
Campfire Member
|
Campfire Member
Joined: Nov 2005
Posts: 126 |
Mark Penrod is one of the best for M70 safety work.
Last edited by DavidReed; 12/04/23.
|
|
|
|
Joined: Dec 2019
Posts: 4,680
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2019
Posts: 4,680 |
I've chatted with Al often about my DIY projects. I didn't realize he did work for hire!
|
|
|
|
Joined: Jan 2003
Posts: 3,472 Likes: 15
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2003
Posts: 3,472 Likes: 15 |
Jim Kobe or Mark Penrod would do an excellent job for you, Matt. Mr. Kobe has a reputation of turning things around pretty quickly. It's very likely there's some timing issues involved, also. I'm not a 'smith in the sense that it's what I do for a living. If a project looks interesting, is something worth doing or nobody else will touch it because it would cost too much to have a pro do it...those are the ones that seem to wind up here. The vast majority of the stuff I do is pro bono. I've been pretty fortunate in life..it's a way of both paying it back and forward. Wishing you the best with your 670/70 hybrid. -Al
Forbidden Zoner
|
|
|
|
Joined: Dec 2019
Posts: 4,680
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2019
Posts: 4,680 |
Jim Kobe or Mark Penrod would do an excellent job for you, Matt. Mr. Kobe has a reputation of turning things around pretty quickly. It's very likely there's some timing issues involved, also. I'm not a 'smith in the sense that it's what I do for a living. If a project looks interesting, is something worth doing or nobody else will touch it because it would cost too much to have a pro do it...those are the ones that seem to wind up here. The vast majority of the stuff I do is pro bono. I've been pretty fortunate in life..it's a way of both paying it back and forward. Wishing you the best with your 670/70 hybrid. -Al Thanks, Al!
|
|
|
|
Joined: Dec 2023
Posts: 14
New Member
|
New Member
Joined: Dec 2023
Posts: 14 |
Mark Penrod, i have used him and does excellent work.
|
|
|
|
Joined: Dec 2014
Posts: 9,154 Likes: 6
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2014
Posts: 9,154 Likes: 6 |
Did someone by any chance smooth or hone the sear bar/firing pin assy angle face? sounds like the firing pin assembly is sitting too far forward when cocked for the safety cam to engage and retract the firing pin up off the sear. IF, that's the case, about 3 strokes of a needle file and a a few strokes with a fine stone on the rear of the safety notch will cure it.
Well this is a fine pickle we're in, should'a listened to Joe McCarthy and George Orwell I guess.
|
|
|
|
508 members (1936M71, 219DW, 260Remguy, 1OntarioJim, 01Foreman400, 10gaugeman, 52 invisible),
1,714
guests, and
1,220
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,108
Posts18,522,671
Members74,026
|
Most Online11,491 Jul 7th, 2023
|
|
|
|