|
Joined: Jul 2015
Posts: 14,763 Likes: 4
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Jul 2015
Posts: 14,763 Likes: 4 |
I love collapsible stocks on ARs, but I hate how they rattle. Do any of you have any easy fixes for that?
Politics is War by Other Means
|
|
|
|
Joined: Oct 2016
Posts: 1,759 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Oct 2016
Posts: 1,759 Likes: 1 |
This is one area of the AR where Mil-Spec or Commercial can make a difference. Commercial has no standard so chances of rattling are greater with Commercial. If you have a milspec buffer tube with a Commercial buttstock it will be a rattler. You can you use tape to shim or make sure you have a good milspec tube and buttstock.
B L M - Bureau of Land Management
|
|
|
|
Joined: Sep 2021
Posts: 4,115 Likes: 9
Campfire Tracker
|
Campfire Tracker
Joined: Sep 2021
Posts: 4,115 Likes: 9 |
^^^^^ This^^^^^
Several aftermarket stock manufacturers provide shims so that their stocks fit either configuration. But you don't want to put a commercial stock on a mil-spec tube.
Si Vis Pacem, Para Bellum
|
|
|
|
Joined: Jan 2001
Posts: 58,635 Likes: 10
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2001
Posts: 58,635 Likes: 10 |
Brad says: "Can't fault Rick for his pity letting you back on the fire... but pity it was and remains. Nothing more, nothing less. A sad little man in a sad little dream."
|
|
|
|
Joined: Jul 2020
Posts: 5,333 Likes: 24
Campfire Tracker
|
Campfire Tracker
Joined: Jul 2020
Posts: 5,333 Likes: 24 |
Aluminum foil tape. I have some made by "Reflectix" for taping together their insulation. It is simply a thin strip of aluminum metal with sticky goo on the back side. It can be very carefully applied to the buffer tube to build it up and tighten up the stock.
Some stocks are easier to do than others. Some are not exactly straight and even inside the channel from front to back, and those take some more creative taping to get them to do. And it will probably take a lot of peeling off and retaping to get it all right, but once it's done, it's done.
|
|
|
|
Joined: Nov 2006
Posts: 10,190
Campfire Outfitter
|
Campfire Outfitter
Joined: Nov 2006
Posts: 10,190 |
Even the cheapest stock can be reshaped to fit tight on the tube with a heat gun.
But I buy SOPMOD’s or CTR’s.
|
|
|
|
Joined: Nov 2008
Posts: 4,217 Likes: 5
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2008
Posts: 4,217 Likes: 5 |
|
|
|
|
Joined: Jan 2010
Posts: 8,060 Likes: 9
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2010
Posts: 8,060 Likes: 9 |
Pick a LOP you want and pack the thing full of JB Weld. Rattle gone.
Or just keep it simple, and buy a bolt action. No rattle
|
|
|
|
Joined: Jul 2015
Posts: 14,763 Likes: 4
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Jul 2015
Posts: 14,763 Likes: 4 |
Even the cheapest stock can be reshaped to fit tight on the tube with a heat gun.
But I buy SOPMOD’s or CTR’s. MOE?
Politics is War by Other Means
|
|
|
|
Joined: Jan 2005
Posts: 57,494
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2005
Posts: 57,494 |
Pick a LOP you want and pack the thing full of JB Weld. Rattle gone.
Or just keep it simple, and buy a bolt action. No rattle Such a super solution. Buy an adjustable stock and then make it fixed. Or come to an AR forum and suggest toss it and buy a bolt rifle... You must be a Mensa candidate.
We can keep Larry Root and all his idiotic blabber and user names on here, but we can't get Ralph back..... Whiskey Tango Foxtrot, over....
|
|
|
|
Joined: Apr 2020
Posts: 1,257
Campfire Regular
|
Campfire Regular
Joined: Apr 2020
Posts: 1,257 |
Kenmi is a couple cards short of a full deck.
If it’s loose as, spray paint the buffer tube, then run a tape across the spine.
Or buy a stock that locks down like a ctr
|
|
|
|
Joined: Nov 2006
Posts: 10,190
Campfire Outfitter
|
Campfire Outfitter
Joined: Nov 2006
Posts: 10,190 |
Even the cheapest stock can be reshaped to fit tight on the tube with a heat gun.
But I buy SOPMOD’s or CTR’s. MOE? CTR’s lock down, MOE’s don’t.
|
|
|
|
Joined: Jan 2005
Posts: 57,494
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2005
Posts: 57,494 |
Even the cheapest stock can be reshaped to fit tight on the tube with a heat gun.
But I buy SOPMOD’s or CTR’s. MOE? CTR’s lock down, MOE’s don’t. accidentally ended up with a couple that lock. Had no clue that was a thing. Then thought reordered same and they didn't come with the locks. I like the locks. Pretty cool thing.
We can keep Larry Root and all his idiotic blabber and user names on here, but we can't get Ralph back..... Whiskey Tango Foxtrot, over....
|
|
|
|
Joined: Dec 2023
Posts: 33
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Dec 2023
Posts: 33 |
I love the locking ones, like the moe, and gave away all my basic m4 style stocks
|
|
|
|
530 members (10ring1, 1minute, 10gaugemag, 1lessdog, 06hunter59, 222Sako, 54 invisible),
2,430
guests, and
1,189
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,193,781
Posts18,515,729
Members74,017
|
Most Online11,491 Jul 7th, 2023
|
|
|
|