Removed from 1998 Bearcat WT 550 cc snowmobile with 400 miles use, when we moved to Michigan.
* Torque Bracket (Helix) 42 degree, for secondary clutch. P/N 0648-026.
* Cam Arms for primary clutch, 44 gram, 3 ea. P/N. 0746-525
* Needle jets, #P-0 for Mikuni VM38 carbs, 2 ea. P/N. 6505-598
All for $50.00 shipped.
This is the factory spec kit to operate above 5000 ft. elevation. Allows engine to run at higher RPMs throughout the powerband to compensate for high altitude power loss. Owner must choose carb main jets from AC chart based on specific altitude and temperature ranges.
These parts will work for other similar years Arctic Cats, check Part Numbers from on-line parts store.
Last edited by Oldidaho; 02/03/24.
