|
Joined: Dec 2021
Posts: 2,353 Likes: 1
Campfire Regular
|
OP
Campfire Regular
Joined: Dec 2021
Posts: 2,353 Likes: 1 |
I just ordered one in .452" for .45 acp. Just wondered if anybody had good luck with them.
Why do I have to press 1, for English?
|
|
|
|
Joined: Jan 2014
Posts: 1,349 Likes: 2
Campfire Regular
|
Campfire Regular
Joined: Jan 2014
Posts: 1,349 Likes: 2 |
They work fine but they only size. You tumble lube and push up through die. I have a half dozen.
|
|
|
|
Joined: Dec 2021
Posts: 2,353 Likes: 1
Campfire Regular
|
OP
Campfire Regular
Joined: Dec 2021
Posts: 2,353 Likes: 1 |
Ok, good to know. I ordered one in .45acp.
Why do I have to press 1, for English?
|
|
|
|
Joined: Apr 2006
Posts: 4,411 Likes: 5
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2006
Posts: 4,411 Likes: 5 |
I prefer the Lee push through die for sizing and have them for every caliber I cast for. Pushing the bullets from the base reduces the tendency for the bullet to tip and size unevenly. After sizing, I run the bullets through a lubrisizer with a slightly larger die to lube them.
|
|
|
|
Joined: Jan 2022
Posts: 429 Likes: 2
Campfire Member
|
Campfire Member
Joined: Jan 2022
Posts: 429 Likes: 2 |
I have a Lubrisizer but use it only for 45-70 bullets now. Everything else I use Lee push through sizers. I changed over when I started powder coating.
|
|
|
|
Joined: Jul 2013
Posts: 9,189
Campfire Outfitter
|
Campfire Outfitter
Joined: Jul 2013
Posts: 9,189 |
I agree. Use both Lee and NOE bushings. I like the NOE product a lot.
I belong on eroding granite, among the pines.
|
|
|
|
Joined: Mar 2011
Posts: 45
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Mar 2011
Posts: 45 |
Nice thing about the NOE is if you have a lathe or even a mini lathe making custom bushings is really easy.
|
|
|
|
Joined: Sep 2010
Posts: 7,513 Likes: 10
Campfire Outfitter
|
Campfire Outfitter
Joined: Sep 2010
Posts: 7,513 Likes: 10 |
I powdercoat mine! I started using Lee push through sizing dies but transitioned to the Night Owl Enterprises system when it became difficult to get Lee dies in the sizes I want.
Medics bury their mistakes..
|
|
|
|
Joined: Nov 2005
Posts: 23,159 Likes: 6
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2005
Posts: 23,159 Likes: 6 |
I turn my own custom diameter push-through dies. A foot long piece of 7/8-14 all-thread is good for a half dozen dies. I don't care for Lee Liquid Alox so I pan lube the oddballs and then push them through a die. Doesn't have to be hardened - a soft steel die will last forever.
"You can lead a man to logic, but you cannot make him think." Joe Harz "Always certain, often right." Keith McCafferty
|
|
|
|
Joined: Dec 2021
Posts: 2,353 Likes: 1
Campfire Regular
|
OP
Campfire Regular
Joined: Dec 2021
Posts: 2,353 Likes: 1 |
I turn my own custom diameter push-through dies. A foot long piece of 7/8-14 all-thread is good for a half dozen dies. I don't care for Lee Liquid Alox so I pan lube the oddballs and then push them through a die. Doesn't have to be hardened - a soft steel die will last forever. Yeah, I've been thinking about making the next one too. Probably make a .358" one.
Why do I have to press 1, for English?
|
|
|
|
Joined: Sep 2013
Posts: 1,556 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Sep 2013
Posts: 1,556 Likes: 1 |
I use the .358 and .452 for 9mm and .45acp’s and some .45 Colts. Run through the push through, heat treat, then lube on the Lyman450.
|
|
|
|
Joined: Jun 2006
Posts: 16,440 Likes: 3
Campfire Ranger
|
Campfire Ranger
Joined: Jun 2006
Posts: 16,440 Likes: 3 |
I have a Lubrisizer but use it only for 45-70 bullets now. Everything else I use Lee push through sizers. I changed over when I started powder coating. Do you size before, or after, powder coating?
I've always been a curmudgeon - now I'm an old curmudgeon. ~Molɔ̀ːn Labé Skýla~
|
|
|
|
Joined: Aug 2002
Posts: 19,134 Likes: 6
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2002
Posts: 19,134 Likes: 6 |
Mark, I do it before and after. I think overkill, but it takes little time. miles
Look out for number 1, don't step in number 2.
|
|
|
|
Joined: Jun 2006
Posts: 16,440 Likes: 3
Campfire Ranger
|
Campfire Ranger
Joined: Jun 2006
Posts: 16,440 Likes: 3 |
Thanks, Miles. I hope you've had a very good Thanksgiving.
I've always been a curmudgeon - now I'm an old curmudgeon. ~Molɔ̀ːn Labé Skýla~
|
|
|
|
Joined: Aug 2002
Posts: 19,134 Likes: 6
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2002
Posts: 19,134 Likes: 6 |
It was a good day. We got much needed rain. miles
Look out for number 1, don't step in number 2.
|
|
|
|
Joined: Jan 2022
Posts: 429 Likes: 2
Campfire Member
|
Campfire Member
Joined: Jan 2022
Posts: 429 Likes: 2 |
I have a Lubrisizer but use it only for 45-70 bullets now. Everything else I use Lee push through sizers. I changed over when I started powder coating. Do you size before, or after, powder coating? It depends on the bullet, sometimes before and after. I like putting gas checks on first because the bullets stand up easier when I bake the pc’d bullets. I put them on as they are pushed through the die. Otherwise I powder coat right after casting.
|
|
|
|
Joined: Apr 2010
Posts: 2,381 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Apr 2010
Posts: 2,381 Likes: 1 |
I prefer the Lee push through die for sizing and have them for every caliber I cast for. Pushing the bullets from the base reduces the tendency for the bullet to tip and size unevenly. After sizing, I run the bullets through a lubrisizer with a slightly larger die to lube them. This, exactly. If you want accurate bullets this is the way I have found to accomplish this. Good Luck all, Rick
|
|
|
|
Joined: May 2014
Posts: 10
New Member
|
New Member
Joined: May 2014
Posts: 10 |
It’s ok. You need to pay attention to how full it gets. It’s best if you invert it on the bench and funnel the outputted bullet into a bucket. But factory won’t tell you that. Then you can make an easy 1500 in one sitting
|
|
|
|
546 members (12344mag, 160user, 10gaugeman, 117LBS, 1234, 06hunter59, 62 invisible),
2,730
guests, and
1,206
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,795
Posts18,536,418
Members74,041
|
Most Online11,491 Jul 7th, 2023
|
|
|
|